HI thanks for the advice. I got all the gears you highlighted. Initially I got the pinion gear that replaces the differential gear. The first one was a 5mm bore & gear eas 5 mm thickness and diff lock shaft center wouldn't fit. I eventually got a 6mm thickness pinion with 10mm gear thickness. I kept the grub screw part for spur gear shaft but then the idler gear & the spur gear wern't aligned, so I put the same 5mm bearing on the bottom of the idler gear & both the idler and input gear were aligned perfectly. When I closed in my tranny case everything fit great & functioned excelent.
your a good man.. thank you for shairing the info......Un like some people you are a blessing to the rc comunity bro...(= big thumbs up and sub. Cheers!
custom fast rc Brian Brother You Was My Inspiration To Make Something Bullet Proof...Thank You For Sharing That Video. All My tranny issues has been solved🙏
i bet i have watched this 15 times ....hella good of you to share this info bro ....whats one of the run roughly l just dont got the tools to make that shaft
Buddy you have gone into the most amount of depth that anyone doing these Mod 1 transmission conversions have done from what I've seen. Thanks man!!!!
HI thanks for the advice. I got all the gears you highlighted. Initially I got the pinion gear that replaces the differential gear. The first one was a 5mm bore & gear eas 5 mm thickness and diff lock shaft center wouldn't fit. I eventually got a 6mm thickness pinion with 10mm gear thickness. I kept the grub screw part for spur gear shaft but then the idler gear & the spur gear wern't aligned, so I put the same 5mm bearing on the bottom of the idler gear & both the idler and input gear were aligned perfectly. When I closed in my tranny case everything fit great & functioned excelent.
your a good man.. thank you for shairing the info......Un like some people you are a blessing to the rc comunity bro...(= big thumbs up and sub. Cheers!
2024 and you are still inspiring people like me.
Btw the 16t pinion has a bearing from 1 side only? Or it has to have 2 bearings one from each side
Looks almost exactly like a gearbox i know well. 👍🏻👍🏻
custom fast rc Brian Brother You Was My Inspiration To Make Something Bullet Proof...Thank You For Sharing That Video. All My tranny issues has been solved🙏
custom fast rc you were supposed to share how you did it with us and whatever happened to that unveiling of the 12s rusty
custom fast rc ??
Good build. May have to do that. Thank you for the info.
i bet i have watched this 15 times ....hella good of you to share this info bro ....whats one of the run roughly l just dont got the tools to make that shaft
I'm going to make for myself thank you
Nice I subbed ya
Where do u get the 6 mm shaft
Can you tell us the brand for the 32t pinion and where you got it?
32 pinon 16 aldler 12 pinion all are mod 1 you can get an Amazon
Mob1 getting n and Amazon
Still helping folks!!!
It's not easy to make that that shaft but nine possible takes a lot of efforts time and dedication but everything is possible
Tekno gears... Didn't have to Dremel the 16t
Which Mod1 gears did you use?
It's a 32 16 and 12 mod1 and you can get it in Amazon
Where you bought the mob 1 kit tryn to buy one and no luck?
Amazon there is where you can get all the Spurs and gears to make that kind of bulletproof transmission
Does this just make it stronger or can I get more speed?
Is there only 1 bearing on the idler gear?
Yes yes it's only one bearing in the elder
Is there a kit for it
No there is no kit for you have to make it on your own
Will you sale it
Can you build me one and how much
William Rivera Nah I don’t build them to sell brother,, Just for my personal use..