Hello Monotrail, thank you for leading us in our modular journeys. I was into dubstep during its 2009 phase and want to create a similar vibe as those great tracks. So I’m looking forward to being a patrion supporter and hopefully learn what I am after!
I just became a patreon to support your work. Great schematics, perfect pace, audio examples of all patch ideas. While most stuff is not new for me, I still get tons of ideas for new patches while watching your videos (similar to revisiting the manuals of my modules every now and then).
Hey there, thats wonderful to hear! I'm verry happy to get these positive comments, from people who are just looking into modular, to more more experienced users like yourself. And thank you so much for joining Patreon! All the best.
another v. useful session. Really appreciate the time you put into the videos with the clear patch diagrams and careful presentation of ideas. Great resource.
Thank you for this!! Very timely video as I just got a 2hp S+H and need some ideas on how to use it! Really appreciate all your videos though as they are so informative and inspirational! 😄 Keep up the good work! ❤️
Hey! I've just started to get into the modular synths (I haven't bought anything yet I'm trying to look at my needs) and the videos you make are very interesting and well done. Thanks a lot!
Logic modules with OR functions are great for cleaning varying gate or trigger voltages. As long as the voltage exceeds a minimum value, the logic module will output a full level gate. This can be useful if you have a module that gets a little finnicky with gate levels.
Great content, thanks. I noticed what I think is an error at 1:27. You have a sign wave coming from the box, but the box title is noise. Maybe I'm wrong, but it confused me, so I thought I'd mention.
You're welcome! And indeed! Should have been LFO with the sine wave, and than fade out and be replaced by noise allong with the sine and noise visualization a bit later, I missed that, sorry! :/
@@MonotrailTechTalk thanks for confirming. I'm pleased I noticed, because I'm still learning. Your PDF / diagrams are very useful and help learning. Thank you.
I have a channel focused (mostly) on minimal generative patches. They are made in vcv rack, a free software i use to try my patches before i make them real. You will find an awful lot of patches on a single row of modules (roughly 84 hp - but you can happily not consider the oscilloscope and the audio output), using just BASIC modules.
I tried many ways last night to listen to the function of the A-148 S&H.. But I couldn't. Cellz Chips A-130-2 VAC A-140-1 ADSR A-162 TDEL A-110-2 VCO A-180-2 Multiple this is my current system. Thanks for your feedback.
Hello! Start with a simple patch to test the S&H. You could take a sine or noise wave output from the Chips to the Sample input of the 148. Then take a gate output from the Cellz to the Trigger input of the 148. That should give a holded value every time you hit the Cellz. USe the 148 output to modulate something, like the filter of the second Chips voice.
thanx again ... ... can I have a request? :) ... I didn't find a video about Doepfer A183-4 anywhere ... I think it is a very useful module also for adapting manuality to accuracy ...
Requests are always welcome! Unfortunately I don't own the A183-4, but also have to say it seems like a module with a very specific clear function? I'll have a look at it.
Like, watch, comment, edit later ;-) Now is later: Great video! Explaining what S&H does feels easier than coming up with good uses for it. And... what about T&H?
I know sample&hold since many years and many synth has it, but one thing I dont understand: why it is necessary with a gate input? the gate input for its own is a complete signal, so why using sample&hold in this case? It is just a 1D value (on/off), but what changes with sample&hold?
Hi there! I hope this video explains that well enough. A sample and hold circuit needs two signals to work. An input signal, which is the one being sampled. And a gate input is needed as a clock or trigger for the sample & hold to know 'when' to sample a new value.
@@MonotrailTechTalk Basically anything related to utility lol! I gave up on it for midi controllers. But lately I've been wanting to revisit it all and try midi-less modular. Thanks for the videos!
![BLACK BAG - Official Trailer [HD] - Only in Theaters March 14](http://i.ytimg.com/vi/Du0Xp8WX_7I/mqdefault.jpg)
From now on patch & block diagram illustrations are available to Patrons ;) www.patreon.com/monotrail
Your videos are pure gold for modular synth beginners!! Thank you! ⚡️⚡️
You're very welcome, thanks for watching!
Your videos are super helpful for learning all the different functions in modular synthesis. A sincere thank you from a modular newbie!
Hi there! Thank you, thats really nice to hear! All the best :)
For a relative newbie, this is an important (vital!) vid. Incredible😎
Glad to hear you liked it, enjoy!
Hello Monotrail, thank you for leading us in our modular journeys. I was into dubstep during its 2009 phase and want to create a similar vibe as those great tracks. So I’m looking forward to being a patrion supporter and hopefully learn what I am after!
Hello! Glad you get some value out of these! As long as this community is so friendly, I am very happy to be a part of it :)
Your videos are so helpful. Really good instruction. I feel like I am taking a class with a great teacher.
Hey, thanks for the nice comment! I love to think of myself as a teacher here, but with an online audience around the world :) Glad you're part of it!
I just became a patreon to support your work. Great schematics, perfect pace, audio examples of all patch ideas.
While most stuff is not new for me, I still get tons of ideas for new patches while watching your videos (similar to revisiting the manuals of my modules every now and then).
Hey there, thats wonderful to hear! I'm verry happy to get these positive comments, from people who are just looking into modular, to more more experienced users like yourself. And thank you so much for joining Patreon! All the best.
super clear and helpful, thanks for sharing!
Glad you liked it! And thanks for watching :)
another v. useful session. Really appreciate the time you put into the videos with the clear patch diagrams and careful presentation of ideas. Great resource.
Glad you like them!
Thank you for this!! Very timely video as I just got a 2hp S+H and need some ideas on how to use it! Really appreciate all your videos though as they are so informative and inspirational! 😄 Keep up the good work! ❤️
Good timing indeed! And glad to hear you like the series :) Enjoy your experiments!
I just love your lessons, man. bravo!! & thank you very much!!
Happy to hear that! All the best!
I had no idea that it could be used for sample rate reduction. That adds a whole other level of complex texture control. I need to try this out.
Yes, do! I't quite fun, also try it on drums or percussive sounds for sure :)
Perfect explanation! Thank you so much for sharing
Glad to hear it, thanks for watching!
Geil. Danke, du machst das echt gut, schon viel gelernt!
Danke! Alles gute :)
Hey! I've just started to get into the modular synths (I haven't bought anything yet I'm trying to look at my needs) and the videos you make are very interesting and well done. Thanks a lot!
Hey there! Glad to hear it! I stil planning to do a full "modular 101" series of videos at some point. Enjoy the exploring! :)
Best informative tutorials.. Thx so much Monotrail 🙆🏻♂️👌
Thank you for watching! :)
Great tips! 🖤
Glad you like them! Cheers :)
Nice. I like the idea of using it to add random offsets to signals. You could do this with just about anything :-)
Hey, thats a good one indeed. It's lovely to be able to mix signals within a modular like that. :)
Another super helpful gem. Keep up the great work.
Much appreciated! And will do, little video on track & hold should come out friday :)
youre a genius, sir
Haha, thank you!
Logic modules with OR functions are great for cleaning varying gate or trigger voltages. As long as the voltage exceeds a minimum value, the logic module will output a full level gate. This can be useful if you have a module that gets a little finnicky with gate levels.
Indeed, you can even just feed them something like a smooth a random voltage, and get a clean gate signal.
Great explanation. Thanks 🙏
You are very welcome. Cheers!
Great content, thanks. I noticed what I think is an error at 1:27. You have a sign wave coming from the box, but the box title is noise. Maybe I'm wrong, but it confused me, so I thought I'd mention.
You're welcome! And indeed! Should have been LFO with the sine wave, and than fade out and be replaced by noise allong with the sine and noise visualization a bit later, I missed that, sorry! :/
@@MonotrailTechTalk thanks for confirming. I'm pleased I noticed, because I'm still learning. Your PDF / diagrams are very useful and help learning. Thank you.
Very happy to hear it!
this is awesome, like the other videos on your channel. subscribed:)
Thanks for joining the team! Im a bit swamped in work, but will get back to making more videos asap! All the best :)
Amazing work man. Could you do some minimal/dub style videos? Thanks a lot!
Thanks! I'm focusing on sythesis techniques on this channel. For music you can have a look at my other channel ruclips.net/user/monotrailmusic
I have a channel focused (mostly) on minimal generative patches.
They are made in vcv rack, a free software i use to try my patches before i make them real. You will find an awful lot of patches on a single row of modules (roughly 84 hp - but you can happily not consider the oscilloscope and the audio output), using just BASIC modules.
Thanks!
Great tips!
Thanks! :)
I tried many ways last night to listen to the function of the A-148 S&H.. But I couldn't. Cellz Chips A-130-2 VAC A-140-1 ADSR A-162 TDEL A-110-2 VCO A-180-2 Multiple this is my current system. Thanks for your feedback.
Hello! Start with a simple patch to test the S&H. You could take a sine or noise wave output from the Chips to the Sample input of the 148. Then take a gate output from the Cellz to the Trigger input of the 148. That should give a holded value every time you hit the Cellz. USe the 148 output to modulate something, like the filter of the second Chips voice.
@@MonotrailTechTalk super
thanx again ... ... can I have a request? :) ... I didn't find a video about Doepfer A183-4 anywhere ... I think it is a very useful module also for adapting manuality to accuracy ...
Requests are always welcome! Unfortunately I don't own the A183-4, but also have to say it seems like a module with a very specific clear function? I'll have a look at it.
Like, watch, comment, edit later ;-)
Now is later: Great video! Explaining what S&H does feels easier than coming up with good uses for it.
And... what about T&H?
Thanks! I'll get to T&H in another video :)
I know sample&hold since many years and many synth has it, but one thing I dont understand: why it is necessary with a gate input? the gate input for its own is a complete signal, so why using sample&hold in this case? It is just a 1D value (on/off), but what changes with sample&hold?
Hi there! I hope this video explains that well enough. A sample and hold circuit needs two signals to work. An input signal, which is the one being sampled. And a gate input is needed as a clock or trigger for the sample & hold to know 'when' to sample a new value.
_looks at module graveyard, carefully pulls out the S&H and dusts it off._
Oh no! A module graveyard? What else is in there ;)
@@MonotrailTechTalk Basically anything related to utility lol! I gave up on it for midi controllers. But lately I've been wanting to revisit it all and try midi-less modular. Thanks for the videos!