Basic Chunky Glitter Tumbler Tutorial | KCC Glitter | Tumblerpoxy
HTML-код
- Опубликовано: 25 авг 2024
- Thank you for watching my tutorial on how to create a basic chunky glitter stainless steel tumbler using new KCC Glitter! This DIY tutorial video is designed to explain just how simple it can be to decorate a stainless steel tumbler and to help fellow crafters create new products.
kccglitter.com/
Glitter used: Phoenix Fire
KCC Glitter will only be shipping inside the US at this time.
Buy me a Coffee 💕 No pressure at all but if you would like to help support the channel and the tutorials I create, you can use this link to leave a tip. 💕 www.buymeacoff...
Check out our Facebook community group! / epoxytumblersandpens
About me: I have been making epoxy tumblers for approximately six years and have decided to share my methods with aspiring cup makers. Everyone's methods are different and I just want to share what I have found to work best for me!
Please feel free to comment if you have any questions at all! Below is a list of links to some of my favorite products that I use the most to make my tumblers.
If you enjoyed my video, please give it a thumbs up and hit the subscribe button to see more videos like it!
*KCC Glitter - kccglitter.com/
Tumbler Supplier:
MakerFlo - bit.ly/3RQMflM
Products I use frequently and highly recommended:
Silhouette Cameo 4 - amzn.to/3uOuB6h
Tack-It - amzn.to/3ao2nGX
Butane Torch - amzn.to/3pM06wr
Rust-Oleum Flat White Spray Paint - amzn.to/3nILLz1
Cup Turner - amzn.to/3l1xBaw
Paint Brushes - amzn.to/36xlZaO
220 Grit Sandpaper - amzn.to/3k4tEos
Rust-Oleum Gloss Clear Spray Paint - amzn.to/2HfFKKm
Gloves - amzn.to/36QSrUP
Silicone Mats - amzn.to/32YW5Lf
Cup turner motors - amzn.to/2IWXBGI
Plastic mixing cups with measurements - amzn.to/3lLARrG
Medicine cups - amzn.to/3kQFQWC
Zippo Butane Fuel - amzn.to/3lT39Ra
Chip Paint Brushes - amzn.to/373Z4V7
Alcohol Ink - amzn.to/3oH4paG
Cup Turner Foam Inserts - amzn.to/2UKBQfE
GlitterBae Glitter - www.glitterbae...
Blingasm Waterslide Paper - amzn.to/3fcRiL8
Faux Rizzle Epoxy - amzn.to/2IT02dI
Counter Culture Epoxy - amzn.to/3pRzFW6
Painters Tape - amzn.to/3lRGuVa
Popsicle Sticks - amzn.to/3nG33fU
Paper Mate Pens - amzn.to/3o0Lh7n
Wooden Dowel Rods - amzn.to/37WBrOD
Faux Rizzle Epoxy - amzn.to/3nZFM9h
Counter Culture Epoxy - amzn.to/3pRzFW6
Finger Cots - amzn.to/3qprjo0
Epoxy Mixing Cups - amzn.to/3s200C0
Oracle 651 Vinyl - amzn.to/399SUCM
Turner Foam Inserts - amzn.to/2XkuEZ7
Craft Knife - amzn.to/3pXOlCk
Decal Applicator - amzn.to/2MFMOm2
Vinyl Weeding Tools - amzn.to/38jAaBq
Transfer Tape - amzn.to/2Xl95HC
Ice Cubes - amzn.to/3uG9R08
Small Ice - amzn.to/2SNlDc4
Fruit Slices - amzn.to/2SPvm1e
UV Resin - amzn.to/3fCGqb2
UV Flashlight - amzn.to/3fBp3rk
Nail Light - amzn.to/3padzhA
Connect with me on Social Media!
kristicustomcreations
kristicustomcreations
Video music from Epidemic Sound, you can try a free 30 day trial by using my link! www.epidemicso...
*Disclosure: I only recommend products I would use myself and all opinions expressed here are my own. This description box may contain discount codes and affiliate links that at no additional cost to you, I may earn a small financial benefit. As an Amazon Associate I earn from qualifying purchases. This helps support my channel so I can continue to provide you with inspired and focused content. Thank you.
I love that you showed the sanding, so many skip showing that step and I always end up confused about when to do what! You make it look so easy.
Thank you 🥰
That’s a beautiful tumbler
Thank you!
Awesome video - thank you
Thank you
Thank you!!
Have you made a decision on making this a peek-a-boo?
I'm pretty sure I will be making this into a peek a boo cup :)
Thank you the tip about using the flat razor. I like using it much more than the craft knife.
Yes, I completely agree.. a flat razor is the way to go for sure. I feel like I have so much better control with it rather than with a craft knife.
Oh a question I thought of during the video. Is that a tray with parchment paper you put under then cup when you go to put epoxy on cups?
Yes! It's just a cheap plastic serving tray from Walmart that I have had for years. I just put a piece of wax paper down on it to catch any epoxy that I drop. Just helps keep things much cleaner... Lol
The cup is beautiful and it would definitely make a great fall themed cup.
What color paint was on the cup initially (before glitter)? From my end it looks like a chrome red. It looks gorgeous! Can you tell me where you got it?
Thank you! ❤️ It's a spray paint from Amazon, they have numerous colors available. Here's the link to it 🥰 amzn.to/3B27ycs
@@KristisCustomCreations thank you!
@@abbymcmahon365 you're very welcome! 🥰
Beautiful, I am a beginner, making tumbler for personal use, is it better to get 100/200 watts or can You tell me if a 300 watt heat gun will do the trick. Don’t want to get a blow torch like u used.
A heat gun won't pop the bubbles like a torch will. A heat gun will mainly move the epoxy around and won't pop all of them. I would recommend a small torch.
Thank you for taking the time to respond, 1 more question I am looking at face mask/respirators for epoxy, I am seeing so many options on Amazon, any recommendations??
@@cfjack4me you're very welcome. Yes, there are so many to choose from. You definitely want one with an organic vapor gas cover. This is the one I have: amzn.to/36BhECU
Thank you so much, that is the type of mask I was looking for & its affordable. Love this tumbler so pretty
I’m so glad you specifically showed how you get rid of the stick ups on the top of the cup. On your sandpaper link, they don’t offer 220, so which would be a better alternative? 180 or 320? Great video bc i love chunky glitter. Thank you.
I guess they are out of stock, here is a link to one that is in stock that works just as good. amzn.to/3k4tEos
I'm so glad you found it helpful!
love this cup buuuut I was wondering if you did a video on the pink leopard cup it looks so amazing!!!!
Ehhh... I probably should have done one on the leopard cup but I didn't 🤦🏼♀️ I was kind of in a hurry making it and didn't even think about it.
Kristi!!! Thank you sooooo much!!!! I just received all my glitters and epoxy order today and WOW wowzers woohoo! Holy Moly!! These are soooo beautiful!! I just want to thank you for the fast and efficient delivery and y’all’s being on top of everything from beginning to it in my hands!! I wanted to leave a review on your start and I guess I’m too excited or something becuz I couldn’t find it on there!! Anyways!! These AH-mazing colors are just the beginning of my collection from you!! Unicorn Dreams and Fairy God Mother and Into the Deep (are my favs so far outta the 7 I got!!) man I wish I could’ve gotten them all but alas my husband had the allowed me only so much!! Lol) 🦋🌸💕🥰🦄♥️♥️🦋
Awww!!! Yay! I am so happy to hear that you love your order! I just created a Facebook page for KCC Glitter a few days ago so please feel free to leave a review on there. I would appreciate it more than you know! I also have my Facebook group, tumblers, epoxy pens, and more.. have you joined that yet? Thank you so much for the feedback, it has made my whole day! 🥰❤️🥰❤️
@@KristisCustomCreations yes I’m on your FaceBook for the tumblers but not for kcc. I’ll def go join and leave a review their too!! Your so welcome and it made my day to receive the package!! 💕🦄🦋🌸
@@allijmccoy 🥰🥰🥰 thank you
@@KristisCustomCreations are you on Insta too?
Nevermind I found u on there I sent you a dm
Do you let the paint coat dry before applying the second coat of epoxy?
@@kathylafreniere8104 yes, let it dry between every coat of paint or epoxy
Why can't I find the "tumbler epoxy" epoxy you mention on your site? I would really like to find a good tumbler epoxy. The counter culture DIY fast set seems to almost set too fast for me, and I don't have the patience for a lot of others.
So what is the reason for 2 coats of epoxy and sanding it with sand paper and then a 3rd coat?? I’m a beginner, and I get the 2 coats I just don’t understand why you sand it and add another coat of epoxy.
This is gorgeous! I love everything fall! I think it would look amazing with peek-a-boo pumpkins and leaves. Maybe like the ones I've seen with the outlines? Not sure if that makes sense. I can't wait to see what you do with it!
That makes perfect sense and that's kind of what I was thinking of doing with it 🥰
@@KristisCustomCreations can’t wait to see it!
@@nicolecooper6503 thank you 🥰
I love your videos!!!
Awww! Thank you so much! You have no idea how much that means to me!
Can't wait to see when you do the peek a boo ❤️
I gotta figure out what exactly I want to do to it first 🤣
@@KristisCustomCreations I haven't tried a peek a boo yet, working up the courage 😁. That color made me long for fall. I k ow you're going to come up with something fantastic!
@@kristinewithak8265 oh you've got this! 😉
You're very welcome!