For recap: 1. Keep you watch clean. 2. Better buy a strap to refresh the old watch instead of buying a new watch. 3. Service regularly or when your watch starts to deviate. 4. Don't change the date between 10pm and 4am on the dial, to be on the safe side. 5. Screw down a crown even if not submerging. You are welcome =)
I noticed that screw down crowns are mentioned a lot in this and various other vlogs, and I am compelled to offer my knowledge. I have spent a lifetime in the field of Oceanography. I have designed, fabricated and deployed many subsea enclosures for use in that application. There is usually a big misunderstanding in regards to the function of O-rings and standard gaskets. While compression gaskets rely on the strength of compression for sealing, as the hydrostatic and/or hydrodynamic pressure increases against the seal, there is a point where it will breach the seal. O-rings on the other hand seal entirely differently. Providing the O-ring and grove dimensions are correct, O-rings will seal better and better as water pressure increases. The whole concept of the screw down crown on a water resistant watch is an extre layer of security with that extra seal and also to prevent the crown from being inadvertently pulled out while under water. There are many well designed water resistant watches with proper captive O-rings on the stem that, because of the nature of how O-rings work, will withstand many hundreds of metres depth. So, how water resistant a watch can be has nothing to do with a screw down crown, but how well designed and implemented the O-ring or O-rings is/are. As for saturation, helium issues, well that is another story.
As a watch enthusiast who often works with their hands, I recommend a small storage pouch be kept in your bag so you can safely store the watch to avoid damaging it. I have done this for years, and it is one of the best things I have discovered to preserve a special watch that you truly value.
I like to clean my watches with lense cleaning spray and a microfiber cloth. I've never had an issue. For smelly leather straps, I've had great experience using teatree oil.
@@LambentOrt Teatree oil is a natural antibiotic. It has extensive research and applications. I tried it in Guatemala the 1st time out of desperation. It killed the smell and smells like Eucalyptus.
All the work you put in ... that leads to a grin ... And a chuckle or two ... right fixes my mood... So tip of the hat... and thanks for all that. Top chaps get my vote... please RUclips take note.
Another rule I think is never to buy a watch you cannot afford, or better put.. do not put yourself into debt for a watch. Work hard and save what you can, then when you have enough it will feel like much more of an achievement 😊
I'd add something to your fifth rule; Where ever you store your watches, store them with a package of desiccant to absorb moisture in the environment - easier and less thorny than a cactus. 🌵
One of my watches is a Citizen PMD56-2952 (JDM - check it out!) 20bar, the date changes right on 12.00.00, and by the time the day has also changed, the time is 12.00.14 - pretty damn quick!
I just clean my watch every morning by wiping it with the moist hand towel (made of microfiber, but ordinary towels are just fine, too) during my morning routine.
I leave the crown popped out on my quartz watches to save the battery, should I not be doing that? I keep them in a decent quality watch box and I've thrown one of those little silica gel bags in there..
I think you'll be fine with that! As far as I heard, a screwed crown doesn't really contribute to water resistance directly, it's the sealing rings that do. A screwed crown keeps the stem of the crown from being deformed by bumps or being unintentionally pushed in, pulled out or turned, which can cause water coming in under water. Apart from that, water proof doesn't mean air tight. The inner of the watch will eventually adjust to the climate outside watch, unless you are only in an "extreme" climate for only a short time, e.g. a steamy bathroom. If you are in place with constant humid air, like some tropical areas, the inner of the watch will get as humid as the outside, no matter if the crown is screwed or not. It might just take a bit longer to get to it.
"If the watch starts to smell like vinegar, the watch cleaner within you it shall trigger" or "If the watch starts to smell like vinegar, its time to begin the cleaning procedure"
But if I wear the watch under the wristbone everyone can see my Standard mass produced Rolex steel model. Thats the whole purpose of it. And it looks better in wrist shots in my BMW.
@2:26 Yes, this is even true with the “diving version” of Apple Watch Ultra ;-) After taking it to a thermal bath running on sol water, the crown became sticky and needed to be rinsed with fresh water…
Rule suggestion: wear watches that are a good size for YOUR wrist, not whatever size is fashionable or what someone else says is a good size. For most people there is a pretty narrow range of sizes that will look well-proportioned.
Best advice for collectors, work hard to afford quality pieces but don't go into debt. The second piece of advice is to wear what you want, don't let other people tell you what you should value for quality watches. The third rule is to always keep your watch clean, I agree with you guys on that. Watches operate best in a clean and stable environment, so please don't treat you watch like a piece of s***
@@hockingham7160 maybe but you can still take care of it. I get having a watch just for work, I have a Pagani design GMT that I paid a couple hundred bucks for and I use it for one of my jobs. I keep my expensive ones like my Rado Captain Cook for special occasions. As long as you take care of it. Even a cheap watch can last
Great tips, thanks for sharing. I recently purchased a few new straps to revitalize some of my watches. Its like having a new watch again. I also keep them in a case to protect them and I am always careful when winding and screwing down the crown.
Beware with the Casio Mudmasters, all that extra cladding around the body and the bases of the strap can hide all sorts of horrors when you buy pre owned. Got some horrid gunk out of the strap bases and case despite the fact it came with every bit of paperwork and box.
Regarding day/date change I always do it with both hands around 6. Just to be safe. I know it's not that sensitive, but it's not hard to just put hands on 6, it doesn't take any longer than turn them to any other hour. But this way you'll always be safe no matter then watch or brand.
Please, correct me if I am thinking wrong. If there is air in a watch the air has already it's certain natural level of humidity. When I screw down crown I'll close the air inside the watch with all the water which can't go anywhere and mentioned corrosion takes place there anyway. So the "keep the crown always screwed down" above water could be improved the way to go to location with lowest air humidity possible, unscrew your crown for significant time then screw it down and go wherever you want. :)
All good watches have a double seal, one at the stem of the crown and one at the screw down side, it needs more than what’s in the air to ruin a watch, it needs to leak moisture in, all good watches are made of rust proof metal just in case, if your watch has moisture build up on the glass then it has leaks.
@4:00 I wish I had heard that advice about two months ago. I bought a tan suede strap for my Seiko SNK803. While it looks great next to the cream dial, it started looking dirty within a matter of weeks. Now I am considering either a leather strap in the same colour, or a darker brown suede strap. Never again will I get a suede strap in any light colour.
Regarding leaving crown pulled out. Hamilton electric watches, crown should be pulled out when not in use, because the contact points can wear out and they are no longer made.
I was a victim of the last rule. Went to a Miami Dolphins game where the humidity was out of this world. Dial fogged up and soon after watch broke. Had to get a full service
part of my reluctance to buy pre-owned is I assume other people are not as clean or look after things. I can onl imagine the horrors some people find when they buy 2nd hand - would be a good idea for a video where people submit their 2nd hand horrors
I've got to be honest, I used to think 'new new new', but having had a number of used watches from a reputable company that 'finds watches' (hehehe) I've never been disappointed. I am not a big spender; no Rolex, Omega, Patek, Lang, Audemar etc for me, instead Tag, Perrelet, Bremont has been my mainstay cost margin. It's then easier to part-exchange through this particular 'finder of watches' when I wish to upgrade. And I'm not being sponsored! Straps are a massive deal for me too.
I’ve never used a physical store. They give a full refund after a short time if you don’t like it though. And if your reading this Watchfinder, I’d love a Bremont MB III 🤣
@3:21 on this, I’ve realized that the biggest esthetic difference between a nice, but inexpensive watch and a watch 50-100x the cost is the strap. seriously, I have a collection of orient watches and bought a bunch of good looking straps and a two tone bracelet. People literally think my Orient Bambino i wear on a NATO strap is more expensive than my Tank, Seamaster, or speedmaster its wild… i wish i learned about how much experimenting with straps can really make a watch a pop. Blue face open heart orient bambino with a navy blue and pink nato strap. And it might actually be the best looking watch I own right now 😂
Toddlers toothbrush with water and a little bit of mild dish soap. A jewellery cleaner off Amazon for $20 is a great way to clean out that soap on the bracelet when you’re done.
Bought years ago grand seiko. It arrived crown out pos. Contacted seller, he explain he understood crown should be out, since in pics/ shops its in open pos quite often
@@Madmanmarque Thanks. Never figured out the cause until recently. All I knew at the time is that the hands got discoloured and a whopper of a service was required. I figured that perhaps I left the crown loose inadvertently.
Ode To The Rules As with any loved machine, keep the case and bracelet clean If you face a budget cap, start afresh and change the strap Now your watch is growing old, service time for steel and gold Only if you see the sun, should the date advance be run. Above the Earth or fathoms down, be sure you always close the crown
I only "recently" (durring W&W) found out that the date change rule only applies for older movements. All ETA/Sellita calibers produced in the last 10 years (and probably even more) you need not worry about (dunno about STP 'cause they suck and one would be wise to stay far away from 'em). When I asked my watchmaker buddies about the above they confirmed that this is so, however, they keep telling all their clients to stick to the rule to avoid mix ups...
The Tissot with ETA-movement (well, the ETA movement was altered by Tissot iirc, in order to get the 80h of power reserve) I bought earlier this year does mention it in the manual. I'm not about to find out if it's actually necessary or not though, changing the time is no effort at all.
I like the cactus suggestion. Don't know if it's true, but I bet that from today, every watch enthusiast will surprise their better half with a nice cactus now and then. You know, just for safety.
If it smells like vinegar then get it in a sink rinse her it’s a misdemeanour to think that it’s nothing to clean a squirt of mr sheen windowlean for greasy finger marks an easy start I’m sure a 16 isn’t needed but ….
And the threads on the screw down crowns are very fine and there's not a whole lot of them. So be very careful when engaging the threads to screw down the crown. Very careful. And don't over tighten it.
Question: In a watch with a "phantom" date-setting position (no date on the dial, but a date mechanism in the caliber), do you have to be careful not to spin the crown in the phantom position when midnight rolls around? Or is whatever might break in a date complication simply not present in the watch?
If you have a movement from a reputable brand like Seiko, PUW or ETA (I have serviced some of them , so I know) that is less 40 years old you can not damage the movement by setting the date. The worst you can do is reset the datechange. That means if you set the date at 11pm it will not change again at 12pm, but will continue working the next day.
Today, while setting the time on my watch, which has stopped since no wear for days, i had the same question, and after a search i think i will be careful not to do that, better be safe than sorry
@@markus98sb Junghans "Max Bill" automatic. I was surprised that it has the phantom date setting, but apparently it's the same caliber as in the models with a date window (ETA 28242.)
How about the ultrasonic cleaner, is that fine with watches over 10m water resistance? Rule number 6: with a screw in crown, don't try to align the logo on the crown by screwing it in... you might damage the seal by screwing it too tightly!
I put the time at 6 o clock and then change the date… a guy at the watch shop told me it doesn’t matter if it’s 6 am or pm just set it to 6 o clock and set the date then dial in the time. He said at the 6 o’clock position it wouldn’t screw up the watch. Is this true? I’ve been doing it for years.
Wait. Don’t we all do this? I have a cactus in most rooms for this.. I thought that’s why it’s so easy to buy cactus like why else would you buy one? And where else are people putting their watches?
“If your strap smells like vinegar, you likely smell sinister”. Sorry for bringing this out in the world. I’ll see myself out. But I agree with this point.
For recap:
1. Keep you watch clean.
2. Better buy a strap to refresh the old watch instead of buying a new watch.
3. Service regularly or when your watch starts to deviate.
4. Don't change the date between 10pm and 4am on the dial, to be on the safe side.
5. Screw down a crown even if not submerging.
You are welcome =)
Legend
Thank you so much
Needs more rhyming...
Thanks for writing these. The video was rather slow to get to the points.
@@bluedog88 I was actually thinking of that! :D But I can't rhyme in any language. =/
Rule number one: Don't be a snob
Best rule.
Well that rules out half of Watchfinder's commenters then!
That's like no1 rule for collecting watches for a lot of people. Usually the ones who can afford the "good" ones.
True that
Rule Number 2 If you can't buy retail go clone.
If your watch seems tired, a service is required.
If your watch is running slow... take it to someone in the know!
Rule 1: wear what you love!
Except if its a Hublot
@@lordchicken9705 Invicta?
Thats the best advice.
I noticed that screw down crowns are mentioned a lot in this and various other vlogs, and I am compelled to offer my knowledge. I have spent a lifetime in the field of Oceanography. I have designed, fabricated and deployed many subsea enclosures for use in that application. There is usually a big misunderstanding in regards to the function of O-rings and standard gaskets. While compression gaskets rely on the strength of compression for sealing, as the hydrostatic and/or hydrodynamic pressure increases against the seal, there is a point where it will breach the seal. O-rings on the other hand seal entirely differently. Providing the O-ring and grove dimensions are correct, O-rings will seal better and better as water pressure increases. The whole concept of the screw down crown on a water resistant watch is an extre layer of security with that extra seal and also to prevent the crown from being inadvertently pulled out while under water. There are many well designed water resistant watches with proper captive O-rings on the stem that, because of the nature of how O-rings work, will withstand many hundreds of metres depth. So, how water resistant a watch can be has nothing to do with a screw down crown, but how well designed and implemented the O-ring or O-rings is/are. As for saturation, helium issues, well that is another story.
Thank you! Please publish this somewhere lol. It’s the truth!
Great comment. You win the watch internet today 🎉 🏆
Excellent explanation Kevin. 👍👍👍👍
Interesting! The luminox seal watches get alot of hate for having o rings instead of screw down crown. Perhaps the hate is unwarranted!
I leave all mine unscrewed all the time. If anything in the air is that corrosive I’m going to have bigger problems than issues with my watch.
If your watch smells like vinegar, send it to Linakers... (Promptly opens a watch cleaning company named Linakers)
As a watch enthusiast who often works with their hands, I recommend a small storage pouch be kept in your bag so you can safely store the watch to avoid damaging it. I have done this for years, and it is one of the best things I have discovered to preserve a special watch that you truly value.
I like to clean my watches with lense cleaning spray and a microfiber cloth. I've never had an issue.
For smelly leather straps, I've had great experience using teatree oil.
Tea tree oil? How does it work? I'm genuinely curious.
@@LambentOrt Teatree oil is a natural antibiotic. It has extensive research and applications. I tried it in Guatemala the 1st time out of desperation. It killed the smell and smells like Eucalyptus.
All the work you put in ... that leads to a grin ... And a chuckle or two ... right fixes my mood... So tip of the hat... and thanks for all that. Top chaps get my vote... please RUclips take note.
Nice work 🖊 ✅ 🎉
Nice work 🖊 ✅ 🎉
Love the strap change concept. True!
Another rule I think is never to buy a watch you cannot afford, or better put.. do not put yourself into debt for a watch. Work hard and save what you can, then when you have enough it will feel like much more of an achievement 😊
Also, don't buy a watch you can't afford the service costs for.
@@kiljaeden7663 thats why my Submariner is in the Bank safe. But I sometimes take it out, but I put on protective tape to not scratch the watch.
/s
@@raupenimmersatt6906 don’t you wish to enjoy your watch?
This. It feels worlds better to make an earned purchase. It will also test if you do really want said watch or not.
@@Stormin2548 No, I just want to flex :-/
Just kidding, I even wear my GMT 16758 sometimes in the gym and dont give a flying fuck about scratches
you guys amuse me so much! i love the back and forth!
I'd add something to your fifth rule; Where ever you store your watches, store them with a package of desiccant to absorb moisture in the environment - easier and less thorny than a cactus. 🌵
If the month is somewhat shorter - don`t adjust at midnight quarter.
If your watch is running late - try to set a servicing date!
One of my watches is a Citizen PMD56-2952 (JDM - check it out!) 20bar, the date changes right on 12.00.00, and by the time the day has also changed, the time is 12.00.14 - pretty damn quick!
My Grand Seiko does that.
Screw in the crown and your watch won’t let you down.
I just clean my watch every morning by wiping it with the moist hand towel (made of microfiber, but ordinary towels are just fine, too) during my morning routine.
Do the same. wet a microfibre (Zeiss lens cloth) and squeeze excess water and wipe of the watch and let it air dry.
Good avice on trying a new strap on an old watch before looking at new watches. You just saved me $1000 !
I leave the crown popped out on my quartz watches to save the battery, should I not be doing that? I keep them in a decent quality watch box and I've thrown one of those little silica gel bags in there..
I think you'll be fine with that! As far as I heard, a screwed crown doesn't really contribute to water resistance directly, it's the sealing rings that do. A screwed crown keeps the stem of the crown from being deformed by bumps or being unintentionally pushed in, pulled out or turned, which can cause water coming in under water.
Apart from that, water proof doesn't mean air tight. The inner of the watch will eventually adjust to the climate outside watch, unless you are only in an "extreme" climate for only a short time, e.g. a steamy bathroom. If you are in place with constant humid air, like some tropical areas, the inner of the watch will get as humid as the outside, no matter if the crown is screwed or not. It might just take a bit longer to get to it.
"If the watch starts to smell like vinegar,
the watch cleaner within you it shall trigger"
or
"If the watch starts to smell like vinegar,
its time to begin the cleaning procedure"
Getting a new strap before considering buying a new watch, is one of the best advices.
1 Wear above the wrist bone
2 Dont pay to much over retail cause it drives the prices higher for everyone
3 Match watches w outfit types
But if I wear the watch under the wristbone everyone can see my Standard mass produced Rolex steel model.
Thats the whole purpose of it. And it looks better in wrist shots in my BMW.
@@raupenimmersatt6906 😆
Strap refreshes would be so much easier if my local Tissot AD actually carried the PRX straps instead of me having to source them on the internet.
@2:26 Yes, this is even true with the “diving version” of Apple Watch Ultra ;-) After taking it to a thermal bath running on sol water, the crown became sticky and needed to be rinsed with fresh water…
Rule suggestion: wear watches that are a good size for YOUR wrist, not whatever size is fashionable or what someone else says is a good size. For most people there is a pretty narrow range of sizes that will look well-proportioned.
Have you seen Marshall on 'Wristwatch Revival'? The man is a GENIUS!!
100% agree. He is very good.
Loved the opening music. The start of the Marine Corps Hymn. Semper Fidelis
Best advice for collectors, work hard to afford quality pieces but don't go into debt. The second piece of advice is to wear what you want, don't let other people tell you what you should value for quality watches. The third rule is to always keep your watch clean, I agree with you guys on that. Watches operate best in a clean and stable environment, so please don't treat you watch like a piece of s***
But what about my beater watch? That's it's life path
@@hockingham7160 maybe but you can still take care of it. I get having a watch just for work, I have a Pagani design GMT that I paid a couple hundred bucks for and I use it for one of my jobs. I keep my expensive ones like my Rado Captain Cook for special occasions. As long as you take care of it. Even a cheap watch can last
Unless u own a g shock
I'm a tradesman so I absolutely cannot wear my mechanical watches at work so sadly I barely ever wear them at all :( they would get destroyed
@@huge_balls yeah most likely.real shame
Is it good for the watch to use an ultrasonic cleaner like drop it in the water for a few minutes while being ultrasounded?
Great tips, thanks for sharing. I recently purchased a few new straps to revitalize some of my watches. Its like having a new watch again. I also keep them in a case to protect them and I am always careful when winding and screwing down the crown.
If your strap smells like vinegar, it means you're sitting close to Britain's new Prime Minister.
Hilarious
Damn y'all Brits can roast someone in the most subtle of ways
This wasn’t a video on hype,
that’s why I gave you a like.
Beware with the Casio Mudmasters, all that extra cladding around the body and the bases of the strap can hide all sorts of horrors when you buy pre owned. Got some horrid gunk out of the strap bases and case despite the fact it came with every bit of paperwork and box.
I once got told if you buy pre owned always get it ultrasonic cleaned even if it looks clean. Lots of little area gunk can hide.
so that's why it's called mudmaster?
Regarding day/date change I always do it with both hands around 6. Just to be safe. I know it's not that sensitive, but it's not hard to just put hands on 6, it doesn't take any longer than turn them to any other hour. But this way you'll always be safe no matter then watch or brand.
I enjoyed the rhyming part!
1:00 I wonder that too 🤔
Please, correct me if I am thinking wrong. If there is air in a watch the air has already it's certain natural level of humidity. When I screw down crown I'll close the air inside the watch with all the water which can't go anywhere and mentioned corrosion takes place there anyway. So the "keep the crown always screwed down" above water could be improved the way to go to location with lowest air humidity possible, unscrew your crown for significant time then screw it down and go wherever you want. :)
All good watches have a double seal, one at the stem of the crown and one at the screw down side, it needs more than what’s in the air to ruin a watch, it needs to leak moisture in, all good watches are made of rust proof metal just in case, if your watch has moisture build up on the glass then it has leaks.
The thumbnail made me think you were going to tell me not to be left handed 😂
@4:00 I wish I had heard that advice about two months ago. I bought a tan suede strap for my Seiko SNK803. While it looks great next to the cream dial, it started looking dirty within a matter of weeks. Now I am considering either a leather strap in the same colour, or a darker brown suede strap. Never again will I get a suede strap in any light colour.
Suede gets dirty and is impossible to clean. It will happen to darker straps too, it just won't be as noticeable. Try other leathers.
Easy to say get it serviced. Omega just told me I’ll get my watch back in 8 months
Plenty of independent watchmakers around.
Regarding leaving crown pulled out. Hamilton electric watches, crown should be pulled out when not in use, because the contact points can wear out and they are no longer made.
"if your watch isnt keeping time, get a watchmaker to check its fine"
I was a victim of the last rule. Went to a Miami Dolphins game where the humidity was out of this world. Dial fogged up and soon after watch broke. Had to get a full service
Not a very good watch then?
Thank you for being one of the few things that make me laugh in these times! ❤
You didn't mention which wrist is correct like the thumbnail.... I'm left handed so wear my watch on my right, is that improper?
You forgot the fifth rhyme! "Don't be a clown, screw it down."
part of my reluctance to buy pre-owned is I assume other people are not as clean or look after things. I can onl imagine the horrors some people find when they buy 2nd hand - would be a good idea for a video where people submit their 2nd hand horrors
I've got to be honest, I used to think 'new new new', but having had a number of used watches from a reputable company that 'finds watches' (hehehe) I've never been disappointed. I am not a big spender; no Rolex, Omega, Patek, Lang, Audemar etc for me, instead Tag, Perrelet, Bremont has been my mainstay cost margin.
It's then easier to part-exchange through this particular 'finder of watches' when I wish to upgrade.
And I'm not being sponsored!
Straps are a massive deal for me too.
@@kernicterus1233 perhaps if i’m ever near one of their physical stores where i can see them first, i’d pluck up the courage to go 2nd hand 🙂
I’ve never used a physical store. They give a full refund after a short time if you don’t like it though.
And if your reading this Watchfinder, I’d love a Bremont MB III 🤣
for leather straps I use shoes deo spray. Refresh and kills bacteria.
@3:21 on this, I’ve realized that the biggest esthetic difference between a nice, but inexpensive watch and a watch 50-100x the cost is the strap.
seriously, I have a collection of orient watches and bought a bunch of good looking straps and a two tone bracelet.
People literally think my Orient Bambino i wear on a NATO strap is more expensive than my Tank, Seamaster, or speedmaster
its wild… i wish i learned about how much experimenting with straps can really make a watch a pop.
Blue face open heart orient bambino with a navy blue and pink nato strap. And it might actually be the best looking watch I own right now 😂
“If your strap smells like vinegar, don’t let it linger.”
“If you change the date, your watch will be in a right state.”
Yo give this guy ☝️ that rolex
What about getting your drivers checked every year for pressurization omega says every once a year you should get that checked
If I’m left handed I should wear the watch in the right hand? I always do it that way but I don’t know…
If your strap smells like vinegar... there used to be a rhyming solution for many people, but that's not been legal since 1807 😅
That Autavia got my motor running! So freaking gorgeous ❤
If your watch smells like vinegar, set it on fire.
And if your watch is omega, make sure it’s one of the top 10 speedmaster
Toddlers toothbrush with water and a little bit of mild dish soap. A jewellery cleaner off Amazon for $20 is a great way to clean out that soap on the bracelet when you’re done.
Bought years ago grand seiko. It arrived crown out pos. Contacted seller, he explain he understood crown should be out, since in pics/ shops its in open pos quite often
Buy a watch that fits your style…
Buy that one that makes you smile
Also don't wear your dive watch in a hot tub. The heat can deteriorate the O rings.
Learned that the hard way back in 80s with GMT Master II at North Road.
@@pickfairguy Sorry to hear that.
@@Madmanmarque Thanks.
Never figured out the cause until recently. All I knew at the time is that the hands got discoloured and a whopper of a service was required.
I figured that perhaps I left the crown loose inadvertently.
If your strap smells like vinegar, add salt like Gary Lineker.
If your (sailcloth) strap smells like vinegar, use it as a spinnaker.
Ode To The Rules
As with any loved machine, keep the case and bracelet clean
If you face a budget cap, start afresh and change the strap
Now your watch is growing old, service time for steel and gold
Only if you see the sun, should the date advance be run.
Above the Earth or fathoms down, be sure you always close the crown
I've seen stores leave their watch crowns unscrewed though, wouldnt that damage the watch?
If you want your watch to stay alive, change the date at 5:35? 🤷🏻♂️
A highly informative video. Thanks.
I use a glasses cloth cleaner thingy to keep my watch finger print free
Awesome! Thank you!
If your watch starts to smell of vinegar, it's time to buy a spinnaker
I only "recently" (durring W&W) found out that the date change rule only applies for older movements. All ETA/Sellita calibers produced in the last 10 years (and probably even more) you need not worry about (dunno about STP 'cause they suck and one would be wise to stay far away from 'em). When I asked my watchmaker buddies about the above they confirmed that this is so, however, they keep telling all their clients to stick to the rule to avoid mix ups...
The Tissot with ETA-movement (well, the ETA movement was altered by Tissot iirc, in order to get the 80h of power reserve) I bought earlier this year does mention it in the manual. I'm not about to find out if it's actually necessary or not though, changing the time is no effort at all.
Good advice. Thanks Tom 😊
Rule 6: When you need a new watch, use WatchFinder, or you will get kicked in the crotch.
You’re welcome.
I like the cactus suggestion. Don't know if it's true, but I bet that from today, every watch enthusiast will surprise their better half with a nice cactus now and then. You know, just for safety.
If your watch smells of vinegar, kick it in the cleaning bowl like Lineker
If it smells like vinegar then get it in a sink rinse her it’s a misdemeanour to think that it’s nothing to clean a squirt of mr sheen windowlean for greasy finger marks an easy start I’m sure a 16 isn’t needed but ….
If your strap smells like vinegar... Uhh. Watchfinder. For all your watch needs.
Great vid! I only have waterproof watches so I just keep it on as I hop in the shower in the morning 🤠
If you have a guest over and your watch smells like vinegar, you might offend your visitor.
And the threads on the screw down crowns are very fine and there's not a whole lot of them. So be very careful when engaging the threads to screw down the crown. Very careful. And don't over tighten it.
Question: In a watch with a "phantom" date-setting position (no date on the dial, but a date mechanism in the caliber), do you have to be careful not to spin the crown in the phantom position when midnight rolls around? Or is whatever might break in a date complication simply not present in the watch?
The little tab shouldn't be there so my bet is you're ok.
If you have a movement from a reputable brand like Seiko, PUW or ETA (I have serviced some of them , so I know) that is less 40 years old you can not damage the movement by setting the date. The worst you can do is reset the datechange. That means if you set the date at 11pm it will not change again at 12pm, but will continue working the next day.
Today, while setting the time on my watch, which has stopped since no wear for days, i had the same question, and after a search i think i will be careful not to do that, better be safe than sorry
@@MrKobeFuentes What kind of watch are you talking about?
@@markus98sb Junghans "Max Bill" automatic. I was surprised that it has the phantom date setting, but apparently it's the same caliber as in the models with a date window (ETA 28242.)
How about the ultrasonic cleaner, is that fine with watches over 10m water resistance?
Rule number 6: with a screw in crown, don't try to align the logo on the crown by screwing it in... you might damage the seal by screwing it too tightly!
I put the time at 6 o clock and then change the date… a guy at the watch shop told me it doesn’t matter if it’s 6 am or pm just set it to 6 o clock and set the date then dial in the time. He said at the 6 o’clock position it wouldn’t screw up the watch. Is this true? I’ve been doing it for years.
I don’t have telegram
If your strap smells like vinegar, clean it with a damp toothbrush or something similar.
Spot on
If your strap smells like vinegar,
Refrain from regions testicular.
That’s not called “Mastur Chronometer”.
A “Hodinkee” is it’s monicker.
Good point with the cactus. I always leave my watches beside a cactus to prevent moisture damage
Wait. Don’t we all do this? I have a cactus in most rooms for this.. I thought that’s why it’s so easy to buy cactus like why else would you buy one? And where else are people putting their watches?
Who doesn’t?
I don’t even have a watch box, I just hang them on the cactus 🌵
If your Rolex smells like vinegar, don't wipe it on the spinnaker. But a proper boat with some go, and an Omega just for show.
You should have done this as a podcast. I think you should think about doing a podcast.
"Something that rhymes with vinegar" - I know what I must do but don't know if I have the power to do it...
Ovet use the vinegar, that's a move of a beginner
I expected to see about the Rolex Submariner, and why it has a red cross on the video intro.
Righthanded and wear my watch on my right hand....Ohhhhhhhhhhhh!!!
“If your strap smells like vinegar, you likely smell sinister”. Sorry for bringing this out in the world. I’ll see myself out. But I agree with this point.
“If your watch strap smells like vinegar, throw it out and go buy yourself a brand new Spinnaker”
If your watch starts running fast and it’s not anti-magnetic, try demagnetizing it first, a demagnetizer can be bought for $10.
Don’t ask a RUclips comment section to rhyme with vinegar
The only rhyme for vinegar surely would be Srinagar, in India.
Changing the strap for a new one is like changing the wheels for a car that can instantly change it's overall look.
My rule #1... put a backup watch on if you're to engage in any activity that could damage your good one.
Rule number 6, you have to wear your watch once a while, even if you have many watches.
"Best answer to that wins.... a like from us." Nice one.. 🤔