SPEEDFIGHT MOPED 50CC IN GREAT CONDITION FULL FIX AND RIDE

Поделиться
HTML-код
  • Опубликовано: 11 дек 2024
  • CARB, VARIATOR, SUSPENTION , BRAKES, EXHAUST, ROLLERS AND JETS
    ALL IN THE VIDEO
    ONE OF THE BEST CONDITION PEUGEOT MOPED SCOOTER I HAVE SEEN FOR A LONG TIME
    FULL FIX FROM NONE RUNNER TO RUNNING
    CARB, VARIATOR, SUSPENTION , BRAKES, EXHAUST, ROLLERS AND JETS
    ALL IN THE VIDEO
    GUEST APPEARANCE FROM MY SON TOO

Комментарии • 101

  • @tigerstripemark6973
    @tigerstripemark6973 3 года назад +3

    Your channel is superb mark very educating i have learned a lot from you cheers matey keep up the fantastic content👍👍👍👍

    • @marksavage
      @marksavage  3 года назад +1

      thanks bud it is so nice to get that sort of feedback

    • @eldincatic7519
      @eldincatic7519 2 года назад

      @@marksavage hey mark i need help with my speedfight 3 sooter its 2t 50cc stock. and i want to have it go faster what do I need to change on it to achiwe that

    • @marksavage
      @marksavage  2 года назад

      @Eldin Catic sp3s can be hard as the are cdi restricted
      But a spots exhaust, small upjet of 4 and fresh 6g rollers can help

  • @tommorgan1233
    @tommorgan1233 3 года назад +3

    Brilliant, even better to see your lad enjoy your efforts 👍

    • @marksavage
      @marksavage  3 года назад

      you could see it in his face lol, but all in a great end product

  • @PugBoiGti
    @PugBoiGti 3 года назад

    Watching this makes me miss my old water cooled speedfight 1

    • @marksavage
      @marksavage  3 года назад

      They are fun peds bud
      Thanks for watching

  • @graemeelliott2328
    @graemeelliott2328 2 года назад

    Hi mark can you do a video showing a speedfight 2 ac wire harness and show the connections please mine seam to have the wire for the auto choke cut off. So can’t plug my auto choke to anything. If you can show where the wires should be so I can a couple new ones on would be a great help. Thanks Graeme

  • @kurtissavage1
    @kurtissavage1 3 года назад

    What a handsome young chap at the end 😉

  • @danielmagnusson5366
    @danielmagnusson5366 3 года назад

    Fantastic video!

    • @marksavage
      @marksavage  3 года назад

      Many thanks bud and for watching

  • @kayone8571
    @kayone8571 3 года назад

    Easy mark hope your
    Doing well good video

    • @marksavage
      @marksavage  3 года назад +1

      as always bud thanks and for your comments
      take care

  • @hp4adz533
    @hp4adz533 3 года назад

    H Mark great videos
    Just wanted to reach out and see if you fancied maybe doing a feature on my current bike
    I had a speedfight back in the day and wanted to Show that you can go from a speedfight to a 200bhp super bike

    • @marksavage
      @marksavage  3 года назад

      i would love to bud ,are you far from essex

    • @hp4adz533
      @hp4adz533 3 года назад +1

      @@marksavage I live in Southampton but my parents live in colchester and il be visiting them soon

    • @marksavage
      @marksavage  3 года назад

      @@hp4adz533 then best you sort out a date and come over mine and we can sort out a video and a cuppa as only in braintree ,

    • @hp4adz533
      @hp4adz533 3 года назад

      @@marksavage Have you got a email i can contact you on

  • @DTMotorcyclesEssex
    @DTMotorcyclesEssex 3 года назад

    Brilliant vid marky what camera u use mate proper good picture 👌🏻

    • @marksavage
      @marksavage  3 года назад +1

      Thanks bud
      A Panasonic 4k hc-vx870
      All in a good camera

  • @energetykpower8648
    @energetykpower8648 Год назад

    Hi Mark.
    I have an issue with my speedfight (LC)
    Bike was stood in the garage for last 4 years. I have finally decided to get it going and I have an issue with oil.
    It looks like oil is leaking out from the carb and also around oil pump.
    Also it looks like there is lots of oil inside the engine and in cooling system.
    I have drain the cooling system and clean it alsocleaned the carb.
    Any ideas why it happened ?
    Oil pump failure?
    Thanks

    • @marksavage
      @marksavage  Год назад

      Hi bud , you will have oil in the sump and carb, it's 2t oil which separates
      I have 100 speedfight videos on a play list
      They will help with recommissionning

    • @marksavage
      @marksavage  Год назад

      Take it all off
      Clean , change pipes , fuel and 2t oil out
      Clean carb as in my videos

  • @paulsmith9241
    @paulsmith9241 3 года назад

    Hi Mark , what's your opinion on braided hoses for a tuned ped ..is it a waste of money .just thinking.....

    • @marksavage
      @marksavage  3 года назад +1

      to be honest yes bud , its just for personal taste but i wouldn't unless you want to show it off

  • @ChadTheLad
    @ChadTheLad 3 года назад +1

    Hi mark I've got a nice PMTuning 360 exhaust here for speedfight 1/2 with the mount if your interested?

    • @marksavage
      @marksavage  3 года назад +1

      they are nice bud , comes down to where you are lol and how many pennies you want for it bud

    • @ChadTheLad
      @ChadTheLad 3 года назад

      £100 I can post it to you?

    • @marksavage
      @marksavage  3 года назад +2

      @@ChadTheLad i'll keep you in mind bud as just finished me last ped

  • @Halloweenkieran
    @Halloweenkieran 3 года назад

    Hey Mark when are you going to start work on the the. runner 125 👍

    • @marksavage
      @marksavage  3 года назад +1

      i haven't got a runner bud its a dna and out this week

  • @jack2010howe
    @jack2010howe 3 года назад +1

    Hi mark I just finished work and started my moped it was fine went to give it throttle and it just lost the revs so I stayed off the throttle for a while and then tried it again and it died out it’s my speedfight 3 I’m thinking carb but I’m not to sure let me know ur thoughts

    • @marksavage
      @marksavage  3 года назад

      yes bud agree its your carb, follow my carb videos like in this video to clean carb and then tune
      don't forget the air filter

    • @jack2010howe
      @jack2010howe 3 года назад

      @mark savage cheers going to get some carb cleaner and do the carb it’s a bit weird tho I’ve got to work and it started straight up and drove fine I think it might have flooded so going to check the float and all the jets and everything when I take the carb apart

    • @jack2010howe
      @jack2010howe 3 года назад

      Also mark do you have any videos on how to change ur coolant on a moped because I see u in ur videos saying it’s a bit iffy with liquid cooled peds so I want to know how to properly change the coolant in my bike as there’s literally none to be see in that tank ontop the radiator so I’ve temporarily added a bit of water which I know is bad long term because the water will just evaporate

    • @marksavage
      @marksavage  3 года назад

      @@jack2010howe take the pipe off at the water pump
      Then refill this antifreeze ready use
      I do have videos on it and one of my newer videos I do it which is on my dna out next week

  • @jaden1484
    @jaden1484 3 года назад

    Hi mark I have question I recently put an aftermarket exhaust on my speedfighter 2 100cc and it seems to be dragging from the start , I’ve been told that I need an air filter , a carburettor and possibly a new jet any suggestions I know your the man for this …?

  • @BuiltWithpreza
    @BuiltWithpreza 3 года назад

    Amazing vid mate

    • @marksavage
      @marksavage  3 года назад +1

      Thanks bud and for watching

  • @danwatkins3050
    @danwatkins3050 3 года назад

    Hi Mark I've got a 2010 speed fight 3 just done crank bearings and piston the batteries been off it a while so ive fully charged it put it on gone to fire up and there's no spark hasn't got original keys either is there a immobiliser I will need to bypass or something ? Appreciate it if you can help.
    Cheers

  • @jbq7253
    @jbq7253 Год назад

    I used to have a speedfight and I currently have a sym Symply 50 and after having a Chinese 4 stroke for 3 months selling my speedfight was the worst decision I ever made but it wasn’t in the best condition either it had a broken engine bracket and whoever I brought it off had put a steel bar and the exhaust was screwed to the frame and it cause the engine to split as it’s putting pressure on it but there could’ve been something to fix it also had no front suspension at all and I went to a garage and they said it won’t but after looking at this video I was really confused

    • @marksavage
      @marksavage  Год назад

      As in my many videos bud , I can bring 99% of them back on the road !, they never die lol
      Just garages don't like working on them , easier to sell another one bud
      So many parts available to fix them and with my 100 speedfight video they would have helped

  • @adamaves5563
    @adamaves5563 4 месяца назад

    Have you got a video on a speed fighter 2 that use to do over 30mp now all of a sudden it doesn’t, what could that be or a vid on here to look for to watch?

  • @luks4711
    @luks4711 3 года назад +1

    I have a problem with my speedfight 2 front brake it just goes all the way back when I hold for 10 sec any suggestions

    • @JDMz
      @JDMz 3 года назад

      Check for any leaks. Could have air in the brake resoviour

    • @marksavage
      @marksavage  3 года назад

      same as said below bud , air in system so bleed or master need replacing , piston worn or sticking
      overhaul the system and new pads bud

    • @luks4711
      @luks4711 3 года назад +1

      @@marksavage thank you

    • @luks4711
      @luks4711 3 года назад

      @@JDMz thank you

  • @dylanrobinson4176
    @dylanrobinson4176 3 года назад

    Hi mark I’m hoping you can help I have a Peugeot speedfight 3 125cc sport trying to source new panels checked the usual places wondering if you know a website etc to get them from

    • @marksavage
      @marksavage  3 года назад

      very hard to get hold of to be honest, thats why i bought the sp4 in the back ground in the videos as i just may need them, best try and buy a whole none runner bud

  • @MiranV
    @MiranV 3 года назад

    How to check ground wire for light ??

    • @marksavage
      @marksavage  3 года назад

      start rom battery , use a volt meter , but often once you get of the front panel you will see the earth wires and connectors
      use wd40 on them as it will help

  • @andysavage5755
    @andysavage5755 3 года назад

    Mark what headlight bulb do I need to get I replaced it with the same that was in it 12v 55w I've noticed for ages that somthing is draining my battery. I have read that it's ment to be 12v 35w bulb not 55w could this be the cause of the battery going flat its a new battery 3 months old Been checked and its holding charge

    • @marksavage
      @marksavage  3 года назад

      yes bud it should be 12v 35w .
      maybe worth checking your stator coil or volt reg as well

    • @andysavage5755
      @andysavage5755 3 года назад

      @@marksavage I've just replaced wiring loom battery stator coil flywheel power supply unit. If I unplug the headlight unit everything work like it should if I plug it in turn indicator on headlight flash indicator comes on very dull I've ordered 2 12v 35w bulbs if that don't sort it then I think it's new headlight unit

    • @marksavage
      @marksavage  3 года назад

      @@andysavage5755 did you change the volt regulator but it should have 35w bulbs so that good.
      funny i never noticed your name as its the same as my bothers name lol
      savage is becoming much more common now lol as there was only 3 of us and my uncle from london had so many kids i didnt know half of them lol

  • @jasonhobbs5611
    @jasonhobbs5611 2 года назад

    Can you run them on v power or tesco momentum instead of e10

    • @marksavage
      @marksavage  2 года назад +1

      They are fine bud as still e5 just different name bud , just don't use e10 fuel

    • @jasonhobbs5611
      @jasonhobbs5611 2 года назад

      @@marksavage Thanks Mark, my boy has just turned 16 he has a 2013 Neos easy 50cc he loves it. A bit slow though so may look into an exhaust for him

    • @marksavage
      @marksavage  2 года назад

      @@jasonhobbs5611 I have a few videos that will help
      But exhaust will help
      Them new rollers 6g
      That should help as in my variator videos

  • @manswettergard4422
    @manswettergard4422 3 года назад

    Hi i have a question my speedfight 2 dies when i give it full gas and it gets resistance do you have any tips?

    • @marksavage
      @marksavage  3 года назад

      carb so clean , tune and check jet size , i have videos on all bud

    • @manswettergard4422
      @manswettergard4422 3 года назад

      @@marksavage i have already checked those it there anything else or do i maybe need to order another carb?

  • @darknightin1105
    @darknightin1105 3 года назад

    hi all quick question iv a 125 darkside need to change rollers what waght would you recomend im thinking 60g be ok ??

    • @marksavage
      @marksavage  3 года назад

      I think not !!!
      60g lol
      Try 9g x6
      Or did you mean in total
      Then yea why not bud 10g each

    • @darknightin1105
      @darknightin1105 3 года назад +1

      @@marksavage yes in total 10 g each

    • @marksavage
      @marksavage  3 года назад

      @@darknightin1105 that will be fine bud
      Just make sure you clean it like in my videos

  • @rebeccamcgeachy6623
    @rebeccamcgeachy6623 2 года назад

    Hi Mark can you help me I need some parts for speedfight 1??

    • @marksavage
      @marksavage  2 года назад

      I'm selling one on facebook bud, essex!

    • @rebeccamcgeachy6623
      @rebeccamcgeachy6623 2 года назад

      @@marksavage bro I am from Croatia end I need only starter end kicstar mechanism

  • @Budget-Cars-And-Bikes
    @Budget-Cars-And-Bikes 3 года назад

    Is this a Scooter channel now then Mark?? :)

    • @marksavage
      @marksavage  3 года назад +2

      no bud just had a few in and did some videos of them, i did start with just scooters and moved on to what came in
      but i do get asked for the most things are on scooters
      to be honest most of the bikes out there now are way over priced ,i couldn't buy them and do them up and ask what they are asking
      good to hear from you bud and staying with me
      how things with you and are you finding things ok?

    • @Budget-Cars-And-Bikes
      @Budget-Cars-And-Bikes 3 года назад

      @@marksavage Yeah I'm good mate, finally got the Multistrada DVT last week and have been making some videos on that before the belt change next week, but then doing up the battery terminal 2 days ago, I tweeked my back....so been laid up since! getting old is a pain haha so far it's a bloody awesome bike though!!!

    • @marksavage
      @marksavage  3 года назад +1

      @@Budget-Cars-And-Bikes its one bike only this morning i was asked what one i loved the most and i had to say both mk1 and mk2 multi
      just all round fun bikes all but a little fast as in its there if you need it lol
      as for getting old and E10 dont get me started pmsl
      bloody 50 !!

  • @reecesteward3062
    @reecesteward3062 3 года назад

    Are u selling the speedfight mate

    • @marksavage
      @marksavage  3 года назад +1

      sold it in 20 mins of advertising is

  • @TheMaintenancePlumber
    @TheMaintenancePlumber 3 года назад

    DNA video ?

    • @marksavage
      @marksavage  3 года назад

      next week bud i finish it off
      worth a watch bud
      take care

  • @lukearmsby5507
    @lukearmsby5507 3 года назад

    Sounds like the bike had a whole range of issues not just e10.
    Small jet less fuel. E10 fuel less combustible than e5 exhauat interior likely a honeycomb design almost like a miniature catalytic converter like I had on the 2006 aprilia rs125 stock exhaust euro3 if that was loose blocking the exhaust it will bog it down. Variator shift sticking not allows jt to engage correctly. Although the panels are clean I'm gonna sat the rest of the bike has had a tough life unfortunately. I love the speed fight and a 76 main jet might actually be fine if running e10 because its gonna need more of the fuel to combust the same power output than what e5 would

    • @jasonhobbs5611
      @jasonhobbs5611 2 года назад

      Hi mate, I have a 100cc speedfight 2 2001 it's never had any e10 as it was garaged in 2004
      I'm planning on getting an mot this week can I run it on tesco momentum instead of e10
      Any help will be greatly appreciated.

    • @lukearmsby5507
      @lukearmsby5507 2 года назад +1

      @@jasonhobbs5611 yeah tesco momentum is 99 octane e5 fuel jts what I use in my cars and bikes you'll be perfectly fine with that

  • @kayone8571
    @kayone8571 3 года назад

    On rollers lol 😂 sometimes they come with grease blame them makers on that one mate

    • @marksavage
      @marksavage  3 года назад

      best wipe then dry as they work a lot better bud

  • @kevingrainger2530
    @kevingrainger2530 3 года назад +1

    ? 14.7 stone ??????? DO me a favour Governor. I've paused this video cos i dinna beleev wata heaa. Mr Savage really 14.7 stone.?

    • @marksavage
      @marksavage  3 года назад

      i was when i was doing loads of weights 15.3 , move last year went down to 13.7 as building my extension,
      but been back in my gym and this morning 14.6
      to be fair trying to keep it down as now 50 it can jump on around places i don't want it pmsl
      but yes bud really the camera must make me look thinner !!

    • @kevingrainger2530
      @kevingrainger2530 3 года назад

      @@marksavage Dear Mark, I enjoy your delivery, your enthusiasm and humour. You are doing exactly what i would be doing if my vision allowed. A friend leaves one of his bikes with me and takes me out. I do light maintenance on the bikes, more cleaning and polish work.
      Be advised.
      I cannot purchase an insurance policy because i no longer have a licence. There's no UK website that offers me a quote. I have been told i can have a policy if i use a third party's name who has a licence.
      There is no legal requirement to have any licence to purchase an insurance service/policy.
      As i'm disabled my mobility is impeded. I'm a danger if i own a tractor or scooter etc.
      Please do not support the RNIB, they are not blind. The RNIB use disabled to Groom other for money whilst undermining folk. The RNIB CEO refuses to be interviewed by me, with bloody good reason, so does the Macular society CEO.
      I'm 55 and self taught on bikes from the age of 14. I'm 15.9 chubby. Take careMr Savage.

  • @paulbudford
    @paulbudford 3 года назад

    What a great little bike. Becoming collectable in that condition.
    The garage that did the work though. 🤦

    • @marksavage
      @marksavage  3 года назад

      yes bud tell me about it , i did speak to andy as he watched the video . he has a new bike now but did ask about buying it back!!
      i did a good job of it and rides well now as you can see in my sons face lol

  • @kayone8571
    @kayone8571 3 года назад +1

    Never spray nothing

    • @marksavage
      @marksavage  3 года назад

      100% bud , nice and dry inside the cover

  • @danpullin6610
    @danpullin6610 3 года назад

    Someone getting agg @ 8:02

    • @marksavage
      @marksavage  3 года назад

      You should see me go in my last video ! pmsl

    • @danpullin6610
      @danpullin6610 3 года назад

      @@marksavage yea I did, Loud Exhausts that time

    • @marksavage
      @marksavage  3 года назад

      @@danpullin6610 I'm 50 now it's allowed lol

  • @BELG1994
    @BELG1994 3 года назад

    Did you ever knew about a gasket for a exhaust? What a sound..

    • @marksavage
      @marksavage  3 года назад +1

      i always use a gasket , what are you saying bud

  • @kayone8571
    @kayone8571 3 года назад

    8gram PMSL 😂

    • @marksavage
      @marksavage  3 года назад

      yes they were heavy but worked , i wouldn't have used them but water cooled are better .
      i did tell the new owner maybe to go down to 7g later