Get your Upfitter Switches here for 2022, 2023, 2024, & 2025 Silverado’s & Sierra’s 404parts.com/collections/upfitter-complete-packages/products/2022-2025-silverado-sierra-refreshed-upfitter-auxiliary-switches-package Also, here is the link for the Jonard Adjustable Wire Stripper & Crimper amzn.to/3CXO9wz
Great Install. I wanted to add a quick couple of notes for your DIY'ers out there tackling this same job. Greg was lucky to have the NIPPLE on the DRIVERSIDE pass through. Not all of you will have that option. The instructional PDF that we send you will have both Greg's way and also the PASSENGER side option which involves taking the heat shrink off and going in the Passenger side and OVER to the driverside on the interior of the vehicle. Tomato / Tamato.
@@TheBlueGarage I'm getting too old to be lying on my back trying to crawl up under the dash, I'd get down there and wouldn't be able to get up again...
I copied and pasted this from @404parts answer to a previous question on this, I hope this helps. Unline the previous version of the truck, GM did not wire all of the circuits to the "Gray" Connector. You are missing two Key circuits in having the switches function correctly. Specifically without that you will not be able to have all backlighting featuers or the choice of switching them to IGNITION voltage on the relay side.
Good tutorial. My kit is from GM and came on my 2024 zr2 2500 its all ready to go with panel, switches etc, i just need to wire it up. I dont see a rear usb connection in my kit from GM tho. Any other option youd recommend?
Hoping not a stupid question. If you connected to power via the battery in the engine. What is the wire connecting to power via the USB from the center console for?
Not a stupid question. I should have said this in the video. But the second harness is to provide enough power, through distribution, to each of the Upfitter Switch Lights.
Unline the previous version of the truck, GM did not wire all of the circuits to the "Gray" Connector. You are missing two Key circuits in having the switches function correctly. Specifically without that you will not be able to have all backlighting featuers or the choice of switching them to IGNITION voltatge on the relay side.
Let me get that fixed. But in the mean time if you go to 404Parts.com and during the checkout process use the code THEBLUEGARAGE, that should work for you.
Get your Upfitter Switches here for 2022, 2023, 2024, & 2025 Silverado’s & Sierra’s
404parts.com/collections/upfitter-complete-packages/products/2022-2025-silverado-sierra-refreshed-upfitter-auxiliary-switches-package
Also, here is the link for the Jonard Adjustable Wire Stripper & Crimper
amzn.to/3CXO9wz
Great Install. I wanted to add a quick couple of notes for your DIY'ers out there tackling this same job. Greg was lucky to have the NIPPLE on the DRIVERSIDE pass through. Not all of you will have that option. The instructional PDF that we send you will have both Greg's way and also the PASSENGER side option which involves taking the heat shrink off and going in the Passenger side and OVER to the driverside on the interior of the vehicle. Tomato / Tamato.
Good to know! Thanks for the extra information!
I'll be there(your home) at 5pm tomorrow for my install on my 2024 Silverado 1500 Trail Boss LT...😇
Haha come one now. I just showed you how easy it is to do it on your own. 😂
@@TheBlueGarage I'm getting too old to be lying on my back trying to crawl up under the dash, I'd get down there and wouldn't be able to get up again...
Got ya. That makes sense then.
Can’t wait to see some lift and tires videos!!!!
Coming soon! I can’t wait either.
I don’t understand the pulling off USB power in the back. Isn’t that why we grabbed power from the battery and ran the wire in?
I copied and pasted this from @404parts answer to a previous question on this, I hope this helps.
Unline the previous version of the truck, GM did not wire all of the circuits to the
"Gray" Connector. You are missing two Key circuits in having the switches function correctly. Specifically without that you will not be able to have all backlighting featuers or the choice of switching them to IGNITION voltage on the relay side.
Good tutorial. My kit is from GM and came on my 2024 zr2 2500 its all ready to go with panel, switches etc, i just need to wire it up. I dont see a rear usb connection in my kit from GM tho. Any other option youd recommend?
Great question. If your switch do not light up or power, your lights or whatever you connect to them, then that wire could be all the difference.
@TheBlueGarage so no recommendations tho? Does 404 sell only the usb portion? Maybe I can call em, idk
@molonlabe7750 I would definitely reach out to them and see.
Hoping not a stupid question. If you connected to power via the battery in the engine. What is the wire connecting to power via the USB from the center console for?
Not a stupid question. I should have said this in the video. But the second harness is to provide enough power, through distribution, to each of the Upfitter Switch Lights.
Unline the previous version of the truck, GM did not wire all of the circuits to the "Gray" Connector. You are missing two Key circuits in having the switches function correctly. Specifically without that you will not be able to have all backlighting featuers or the choice of switching them to IGNITION voltatge on the relay side.
🎥🎥🔥🔥🎥
You crushed it again! 🙏
@ 🙌🙌🙌🙌🙌
Link for switches not working for me
Let me get that fixed. But in the mean time if you go to 404Parts.com and during the checkout process use the code THEBLUEGARAGE, that should work for you.
Turn off your vpn