I was wondering if you could please do a video on how to set up throttle and smoke pump mixing. Particularly the percentages of smoke pump volume to throttle stick movement. Would really like to see what the curve would look like and which curve would be better in a 43% Edge 540T for instance. Thank you
Hello Harry, Thanks for all your good explanatory videos. I have implemented this light circuit but have the following problem. With the landing gear extended, the landing light on the nose gear is on and the strobe light flashes. When I retract the landing gear, the landing light goes out but the strobe light goes on permanently. However, it should continue to flash. How can I set this?
Hi Harry, I am not sure if you covered this before, or if it is included in the transmitter but...l.was wondering if there was a way to program butterfly for an electrified sailplane in such a way that... For the case where butterfly is deployed using a 2 or 3 position switch (at full deflection with throttle at idle) and then throttle is advanced from idle, the butterfly is proportionally removed (flaps and aileron return to a faired position at full throttle)? I am still pretty new to Jeti and my old Hitec Aurora 9 had this feature built in, so I'd like to carry it over if at all possible. Thanks in advance!
In the butterfly menu, go to Tuning, set the throttle stick as the control ( so that 0% is throttle off, 100% is full throttle), set Ailerons and Flaps to plus or minus 100% as required.
![Felix "Unfair" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/Oswujxm2Ag0/mqdefault.jpg)
Thanks Harry, just what I wanted to do, and my first use of logic switches :)
I was wondering if you could please do a video on how to set up throttle and smoke pump mixing. Particularly the percentages of smoke pump volume to throttle stick movement. Would really like to see what the curve would look like and which curve would be better in a 43% Edge 540T for instance. Thank you
Hank, I have several videos about smoke pump setups, but I cannot predict what settings individual models will need
Hello Harry,
Thanks for all your good explanatory videos.
I have implemented this light circuit but have the following problem.
With the landing gear extended, the landing light on the nose gear is on and the strobe light flashes.
When I retract the landing gear, the landing light goes out but the strobe light goes on permanently. However, it should continue to flash.
How can I set this?
You have to set the travel values to match what your light controller needs
Hi Harry, I am not sure if you covered this before, or if it is included in the transmitter but...l.was wondering if there was a way to program butterfly for an electrified sailplane in such a way that...
For the case where butterfly is deployed using a 2 or 3 position switch (at full deflection with throttle at idle) and then throttle is advanced from idle, the butterfly is proportionally removed (flaps and aileron return to a faired position at full throttle)?
I am still pretty new to Jeti and my old Hitec Aurora 9 had this feature built in, so I'd like to carry it over if at all possible. Thanks in advance!
In the butterfly menu, go to Tuning, set the throttle stick as the control ( so that 0% is throttle off, 100% is full throttle), set Ailerons and Flaps to plus or minus 100% as required.