Your attention to detail and fitment is awe inspiring! This car is turning out beautifully sinister/aggressive! I'd be happy driving her as she is! Someone is breaking in some new kicks/boots! Josh...drink! Ben's wheel and tire combo is perfect! Go Bennetts Customs, keep moving forward!
Looks like THE iconic hot rod to me. Your suggested refinements to the edges of the body to tie in with the frame should be perfect. It will surely demand an epic paint job.
Wow, man those rear fender body lines hug that wheel perfect, can't wait to see the sill rail edge shaped to the frame, this is how I always pictured what a 32 should look and sit like. Finally someone is doing and hemi powered as well that ticks all my boxs.💪👍
Great job. I reversed my firewall (lots of work and pie cuts to get it right) then cut out the swaged centre section and reversed it facing forward again. Looks almost factory.
It definitely has the "look" Jordan and considering its prior condition you have done an excellent job getting the body to this stage, like the idea of the swept lower body line... more work for the power hammer. Cheers Greg
Simply beautiful. In front of rear wheels, suggest finding center point of frame kick up radius and use that point to create radius of lower body edge in place of simply paralleling the lower frame edge. Thoughts? (Hope I was able to explain that)
IMHO Leave the Cragar spinners off Ben's Roadster. The Coupe need to go down 25.4 mm in the front. That will level out the carburetors just a bit. Or you could just go it 1" 🙄
love a improved a coupe. the stock height 32 grill shell is to tall with the channeled body. the top shouldn't higher than the top of the cowl in my opinion it should be slightly lower viewed from the side to add to the raked look of the car.
Franchement respect a vous pour votre savoir faire bravo à vous dommage en France rouler avec vos voitures est pratiquement impossible vraiment dommage
Use yhe Cragar knock off caps on the coupe, or switch to kelsey wires on the roadster and use them on the roadster. They look out of place on a baby moon.
THE CANADA 🇨🇦 YOU TUBE BOYS CAN,T DO WHAT YOU DO ALL I CAN SAYNOT EVEN CLOSE GREAT JOB JOE ALBERTA CANADA 🇨🇦🆎🆎🆎🆎🆎🆎🇨🇦🇨🇦🇨🇦🇨🇦🇨🇦AWESOME APPRECIATION FOR YOUR WORK AND VIDEOS ALBERTA BC NEVER DO OR CANADA BOYS DO WHAT YOU DO GREAT JOB 🇨🇦🇨🇦🇨🇦🇨🇦🇨🇦🇨🇦
WOW, love the look of this car. Not many craftsmen out there doing this stuff at this level of quality! Music is awesome too.
Your attention to detail and fitment is awe inspiring! This car is turning out beautifully sinister/aggressive! I'd be happy driving her as she is! Someone is breaking in some new kicks/boots! Josh...drink! Ben's wheel and tire combo is perfect! Go Bennetts Customs, keep moving forward!
The coupe and Ben's roadster are both killer! You attention to detail is amazing!!
Everything is PERFECT,(for me) and the wires just top it off!! Don’t change a thing xcept the body line mods u have planed. Nice work.👍👍👍👍
Thanks for the tips!
Perfect timing to set the mood! Ventura Nationals this weekend, and next weekend... Bonneville for me! Killer coupe. Just. Killer.
Jelous!
Looks like THE iconic hot rod to me. Your suggested refinements to the edges of the body to tie in with the frame should be perfect. It will surely demand an epic paint job.
Wow, man those rear fender body lines hug that wheel perfect, can't wait to see the sill rail edge shaped to the frame, this is how I always pictured what a 32 should look and sit like.
Finally someone is doing and hemi powered as well that ticks all my boxs.💪👍
Lots of TLC for this build. My hat's off Perfect subtleties.
Solid lines in the rear along the tires. So beautiful
The 5 window. Looks very cool. Great stance. As for the roadster leave as is. Less is more as they say.
I agree!
Definitely ... K.I.S.S. = Keep It Simple Stupid ! 😆 Work The Firewall The Doors The Roof etc.. Not So Much Lower Edges..
Honestly That Looks Fine..
i have seen fire wall's flipt inside out to gain room for big engines in model A's ! love your work,your a true inspiration !!!
Love the way this is looking. The perfect profile. Great job Jordan, love your attention to detail.
Great job. I reversed my firewall (lots of work and pie cuts to get it right) then cut out the swaged centre section and reversed it facing forward again. Looks almost factory.
Perfect built ! Soooo beautiful !🤩
Coupe looks badass
Mighty nice
I like the squired off look for the rear and front. Don't sweep up the body line. Leave it squared off. Looks right to me.
Spot on 👍 ,also the turn buckel setup brilliant idea wish I'd thought of that to hold my body in right place but it's done now 👍
Nice. Very cool to say the least ! !
Car looking great, liking the plans for the wheel caps, look forward to seeing that.
Cool 😎
Cool music, cool work, cool cars.
Looking good!
Love this so much!
one bad ass rod😃😃😃😃😃😃😃😃😃😃😃
LOOKIN COOL 😎
Looks really good Jordan
Looks awesome!!
Nice work, congratulations!
Thanks Mr B
Looking killer Jordan.
What a stance! She looks amazing.
Fantastic. Really enjoying this build!
Beautiful
Quality workmanship.
It definitely has the "look" Jordan and considering its prior condition you have done an excellent job getting the body to this stage, like the idea of the swept lower body line... more work for the power hammer. Cheers Greg
It will look good with the fenders and running boards.
That thing is sweet.
Looking Good.
#STAYSAFE
#PHILLYPHILLY 🇺🇸
hey lets get that V-DUB done
Deadman's Pass music!
Хорошее музыкальное сопровождение. 🤝
Hello from Las Vegas Nevada
Good video
GOD BLESS YOU AND YOUR FAMILY
GOD BLESS THE UNITED STATES OF AMERICA
Classic seppo move. This has nothing to do with the USA but of course you had to bring it up 🙄🤦♀
Simply beautiful. In front of rear wheels, suggest finding center point of frame kick up radius and use that point to create radius of lower body edge in place of simply paralleling the lower frame edge. Thoughts? (Hope I was able to explain that)
IMHO Leave the Cragar spinners off Ben's Roadster.
The Coupe need to go down 25.4 mm in the front. That will level out the carburetors just a bit. Or you could just go it 1" 🙄
17:30 By chopping off the two front frame extensions it would completely change the look of the front end.
That would definitely look better as far as the smoothy cap or run spiders on it
love a improved a coupe. the stock height 32 grill shell is to tall with the channeled body. the top shouldn't higher than the top of the cowl in my opinion it should be slightly lower viewed from the side to add to the raked look of the car.
Never channel over a 32 frame!
Franchement respect a vous pour votre savoir faire bravo à vous dommage en France rouler avec vos voitures est pratiquement impossible vraiment dommage
Holy shit! The dude is wearing black pants!
😂😂😂
Tommy gun coupe, fuck that’s a lot of work
Да маза фака,да!!!очень круто
🤘🤘👍
😱
Use yhe Cragar knock off caps on the coupe, or switch to kelsey wires on the roadster and use them on the roadster. They look out of place on a baby moon.
Yes,yes he.l yes crager caps with treatment
The whole reason for using the 32 frame is the reveal on the frame. Don't block it.
Grilln shell nand radiator to high. otherwise looking good.
THE CANADA 🇨🇦 YOU TUBE BOYS CAN,T DO WHAT YOU DO ALL I CAN SAYNOT EVEN CLOSE GREAT JOB JOE ALBERTA CANADA 🇨🇦🆎🆎🆎🆎🆎🆎🇨🇦🇨🇦🇨🇦🇨🇦🇨🇦AWESOME APPRECIATION FOR YOUR WORK AND VIDEOS ALBERTA BC NEVER DO OR CANADA BOYS DO WHAT YOU DO GREAT JOB 🇨🇦🇨🇦🇨🇦🇨🇦🇨🇦🇨🇦
Wut