Damn all the comments I just finished reading. You guys are amazing. I see a few regulars and one I see that watched my videos from the very beginning. I remember all my fans some stick out more than others but I appreciate all of you.
I have a question that came up today. If i want to roll two conduits and change the center to center spacing from say 7in to 5.625. What center to center spacing do I use or do i take the average of the two for my adjustment factor?
@@flyfishnsparky ok so I really need to get to that video I haven't had the time. It's really simple if you sit back and think about it. Dnt complicate it. If you need to change the spacing like you said from 7" to let's say 5 . You need to measure your offset and see how much of an offset you need to do for the conduits to fall at the spacing you want.
Being IBEW and not getting certain things as an apprentice and of course still learning the basics as a j dub I always watch his vids. That’s what being a j dub is all about. Knowledge is ♾️. Thanks 4 your vids man
Awesome video!! Always look forward to anything you put out!! Definitely the best channel for conduit bending on the internet!! Nobody is making videos like yours and the knowledge is always on point!! Keep em coming!! 💯
You're teaching me things that I didn't learn at ABC and I understand it more since I've been in the field for 2 1/2 years. Thanks man as a helper moving up pretty quick you've helped me prefect my conduit bending even more.
Great to hear! Thats exactly what i'm trying to do with this channel. Help bridge the gap a little. Give some of the apprentices that actually want to learn all the "practical information" they need to succeed as quickly as they choose.
You have single handedly made me a really accomplished, confident, and prideful conduit bender through your videos. I don’t call moment a lot but I really wanted you to know. Many thanks from a very appreciative electrician.
Damn I really needed to hear that today. Thank you. And it's comments like these that make me continue teaching. Thanks again brother and please consider following me on Facebook/holmzlaw Instagram/holmzlaw TikTok/holmzlaw Reddit/holmzlaw LinkedIn/melvinrubio Snapchat/holmzlaw Tradehounds/holmzlaw Discord- discord.gg/cKgE88wW Communities: Reddit/r/conduitology Facebook/artofconduitbending LinkedIn/artofconduitbending
Hey bud, Good to see your channel is growing well. You got the enthusiasm and drive. You posted a message some time back on one of my conduit bending videos. I think back then you only had a few subs, now almost 3k!!! Keep it up bud! You got the enthusiasm and drive for it, Good luck and keep it going!
I'm running 2, 3inch and 1, 2inch conduit together. They're vertical parallel one way and have to offset out, kick, and then 90 to a horizontal parallel. Just Like this, but with 90's at the end, going through a window. I'm not sure if this exact method will work for having a different spaces on both ends, bit it sure as he'll helps. Thank you so much, I was just gonna make another offset piece going away from the wall, but if I can roll it instead, that would be better
AWESOME Brother!!! Thankfully I saw the video to the end. I was wondering why u had the same angles. I think this method is more simple but like you said with the different angles you cant compare. The difference is very noticeable. Looking forward to your next video. I actually Have a parallel rolling offset in my Junk room/ man cave. LOL i was obsessed when learning these.
I'm glad you watched it to the end too. Or you wouldn't have understood what I was trying to say. I usually plan everything at work. When it comes to these videos I just to on the camera and I go. I think my content is better that way but you have to watch from beginning to end or you might miss something. Thanks for watching.
I'm not sure I forgot the layout already. Just ale the measurements according to your racks. If you really want me to check what you are saying. Join me on Discord discord.gg/chxpkK4mYE
![BLACK BAG - Official Trailer [HD] - Only in Theaters March 14](http://i.ytimg.com/vi/Du0Xp8WX_7I/mqdefault.jpg)
Damn all the comments I just finished reading. You guys are amazing. I see a few regulars and one I see that watched my videos from the very beginning. I remember all my fans some stick out more than others but I appreciate all of you.
I have a question that came up today. If i want to roll two conduits and change the center to center spacing from say 7in to 5.625. What center to center spacing do I use or do i take the average of the two for my adjustment factor?
@@flyfishnsparky ok so I really need to get to that video I haven't had the time. It's really simple if you sit back and think about it. Dnt complicate it. If you need to change the spacing like you said from 7" to let's say 5 . You need to measure your offset and see how much of an offset you need to do for the conduits to fall at the spacing you want.
@@TheArtOfConduitBending thanks for taking time to answer. Your vids are great man..they have have helped a lot for fine tuning my piping.
Being IBEW and not getting certain things as an apprentice and of course still learning the basics as a j dub I always watch his vids. That’s what being a j dub is all about. Knowledge is ♾️. Thanks 4 your vids man
Brother thank you so much for these videos. True game changer for those who care about the craft 🤲🏾
@@shakurkhalifah3356 anytime
Thank you so much I’m so glad I stumbled on your channel
Awesome video!! Always look forward to anything you put out!! Definitely the best channel for conduit bending on the internet!! Nobody is making videos like yours and the knowledge is always on point!! Keep em coming!! 💯
Thanks! Will do!
You're teaching me things that I didn't learn at ABC and I understand it more since I've been in the field for 2 1/2 years. Thanks man as a helper moving up pretty quick you've helped me prefect my conduit bending even more.
Great to hear! Thats exactly what i'm trying to do with this channel. Help bridge the gap a little. Give some of the apprentices that actually want to learn all the "practical information" they need to succeed as quickly as they choose.
You have single handedly made me a really accomplished, confident, and prideful conduit bender through your videos. I don’t call moment a lot but I really wanted you to know. Many thanks from a very appreciative electrician.
Damn I really needed to hear that today. Thank you. And it's comments like these that make me continue teaching. Thanks again brother and please consider following me on
Facebook/holmzlaw
Instagram/holmzlaw
TikTok/holmzlaw
Reddit/holmzlaw
LinkedIn/melvinrubio
Snapchat/holmzlaw
Tradehounds/holmzlaw
Discord- discord.gg/cKgE88wW
Communities:
Reddit/r/conduitology
Facebook/artofconduitbending
LinkedIn/artofconduitbending
Can you posted the all calculations process of the rolling offset thanks you for your time to answer this.
Hey bud, Good to see your channel is growing well. You got the enthusiasm and drive. You posted a message some time back on one of my conduit bending videos. I think back then you only had a few subs, now almost 3k!!! Keep it up bud! You got the enthusiasm and drive for it, Good luck and keep it going!
Hey, thanks
I'm running 2, 3inch and 1, 2inch conduit together. They're vertical parallel one way and have to offset out, kick, and then 90 to a horizontal parallel. Just Like this, but with 90's at the end, going through a window. I'm not sure if this exact method will work for having a different spaces on both ends, bit it sure as he'll helps. Thank you so much, I was just gonna make another offset piece going away from the wall, but if I can roll it instead, that would be better
Thanks for the rolling offset video.
If I use formula of tangent 1/2 of the degree divided by 2 for parallel offsets will still work or not for this type of bends rolling offset
When we getting that advanced method for the shorter distances, coulda came in handy a couple days ago 😂. Nice videos man
Ok lemme see if I put a rush on it. But you watch my advanced bending videos?
AWESOME Brother!!!
Thankfully I saw the video to the end. I was wondering why u had the same angles. I think this method is more simple but like you said with the different angles you cant compare. The difference is very noticeable. Looking forward to your next video. I actually Have a parallel rolling offset in my Junk room/ man cave. LOL i was obsessed when learning these.
I'm glad you watched it to the end too. Or you wouldn't have understood what I was trying to say. I usually plan everything at work. When it comes to these videos I just to on the camera and I go. I think my content is better that way but you have to watch from beginning to end or you might miss something. Thanks for watching.
Advanced bending method to this video coming soon...
Wouldn't that first measurement be 16 and 1/4? .124 would be closer to .125.
Could you please give me a time stamp so I could give you the best answer. Thanks
@@TheArtOfConduitBending nm. Thanks for replying. My calculations were wrong. Never do calculations while hungover. Lol.
@@michaelhinchey LMAO. Hey I understand my brother. Been there...
@@TheArtOfConduitBending Keep doing what you are doing. You are the best.
@@michaelhinchey I'm trying. Been busy. But I have lots of footage that I've recorded that I still need to edit. I'll be back again soon. Thanks
Holmz law I don’t know about anybody else but I’m counting on that advanced method video
Ok ok I'll finish it already. Lol
The finished product looks like it's difficult but you explained it and made it easy. Keep it up, brother! You're helping to make us that much better.
I appreciate that! That's my mission.
So cool 😎 dude!
If I add a 4 conduit, the H would be 8 and the R 8 or 9
I'm not sure I forgot the layout already. Just ale the measurements according to your racks. If you really want me to check what you are saying. Join me on Discord
discord.gg/chxpkK4mYE
c = √ ( a² + b ²)
That's right.