I used the video for my bromie, and it is explained perfectly, after some time even the Brompton service said the installation was done perfectly. Thank you for sharing this. I have one question, did you get rid of the original rear reflector or did you attach another one?
hi~ I don't put original reflector on my brompton after this installation. I use this to instead of rear reflector....(check the link~) drive.google.com/file/d/1_JgiSTEQ3FJTZVrbbUL2_yPxc7wPxpD5/view?usp=drive_link
Hi Ethan thanks for the video. I am really interested in this H&H rack, more when compared to the other mini rack (the one more triangle in shape). How has the rack been after a year? did you experience any issue? do you usually fold and carry stuff in your front carrier block (adding more load to the rack when folded). Thanks!
hi, Kevin. this rack is still work well so far. I chose it because it looks more compack. During 2 times Japan travel, everyhing is ok. When the bike is folded, I usually don't put my bag on front carrier. Its little bit hard to make folded mode bike to move.
I have no idea about if its ok to use inline skate wheels. But I find a person of my country seems have this experience,please check --> fenglo.blogspot.com/2007/12/brompton-eazy-wheel.html
I installed this rack with Muqzi 85mm wheels. Are the wheels you installed rubbing against the rack stays? Also are you using m5 or m6 bolts for your rack wheels? One of mine completely fell off (from my bike....twice!) due to uneven roads I had to cycle through. Any tips ?
hi, I followed brompton EZWheels instruction to put 4 M6 washer between rack and wheels. I don't have rubbing promblem. This rack and wheels give me better experience in good pavement. In rough or uneven road, I choose bike mode not folding mode too.
@@ethanhuang981 thanks for the 4 M6 washer tip! As for the muqzi wheels falling off (and gone), I was actually riding my bike on road with too many potholes to my office. Then when I got to my office, I noticed that a wheel was gone from the rack! It must have fell off while I was riding...thus the gone part. So put in a spare wheel that I bought. Then when I rode my bike the next day...same thing! Wheel is gone once I reached my office!
curbsidecycle.com/products/brompton-eazy-wheels check the link to see brompton EZ Wheel set. You can see that screws it included are long enough to make wheels fixed steadily. So, I really can't understand why your wheels fall.😅
這是好東西，貴有它貴的理由。這貨架不能亂買，便宜的貨架經不起變形的考驗。
I used the video for my bromie, and it is explained perfectly, after some time even the Brompton service said the installation was done perfectly. Thank you for sharing this.
I have one question, did you get rid of the original rear reflector or did you attach another one?
hi~ I don't put original reflector on my brompton after this installation. I use this to instead of rear reflector....(check the link~)
drive.google.com/file/d/1_JgiSTEQ3FJTZVrbbUL2_yPxc7wPxpD5/view?usp=drive_link
Where do u use the black spacer thingy?
nice setup
Hi Ethan thanks for the video. I am really interested in this H&H rack, more when compared to the other mini rack (the one more triangle in shape).
How has the rack been after a year? did you experience any issue? do you usually fold and carry stuff in your front carrier block (adding more load to the rack when folded).
Thanks!
hi, Kevin. this rack is still work well so far. I chose it because it looks more compack. During 2 times Japan travel, everyhing is ok. When the bike is folded, I usually don't put my bag on front carrier. Its little bit hard to make folded mode bike to move.
does it bent the mudguard?
where did u got it
mudguard attach on it, and won’t effect mudguard. H&H is a brand from taiwan.
www.hh-designstudio.tw/
What are those spanner’s?
it's brompton toolkit
Can I use an oxelo inline skate wheels instead of the easy wheel with this setup?
I have no idea about if its ok to use inline skate wheels.
But I find a person of my country seems have this experience,please check --> fenglo.blogspot.com/2007/12/brompton-eazy-wheel.html
I installed this rack with Muqzi 85mm wheels. Are the wheels you installed rubbing against the rack stays? Also are you using m5 or m6 bolts for your rack wheels? One of mine completely fell off (from my bike....twice!) due to uneven roads I had to cycle through. Any tips ?
hi, I followed brompton EZWheels instruction to put 4 M6 washer between rack and wheels. I don't have rubbing promblem. This rack and wheels give me better experience in good pavement. In rough or uneven road, I choose bike mode not folding mode too.
@@ethanhuang981 thanks for the 4 M6 washer tip! As for the muqzi wheels falling off (and gone), I was actually riding my bike on road with too many potholes to my office. Then when I got to my office, I noticed that a wheel was gone from the rack! It must have fell off while I was riding...thus the gone part. So put in a spare wheel that I bought. Then when I rode my bike the next day...same thing! Wheel is gone once I reached my office!
curbsidecycle.com/products/brompton-eazy-wheels
check the link to see brompton EZ Wheel set. You can see that screws it included are long enough to make wheels fixed steadily. So, I really can't understand why your wheels fall.😅
@@ethanhuang981 thanks! It seems like perhaps the m6 size needs to be longer. I'm gonna check out local hardware store for options.
10分鐘可以搞定…搞攝影機拍攝角度可能弄了2個小時😁
同學，你很懂
no rear lights now ?
attach it on my saddle bag.
@@ethanhuang981 ok
包含easy wheels哪一家買的有連結嗎? Thanks.
hello˜
是從bikefun買的，現在已是新版的，網址：
shopee.tw/H-H-Q-type-mini-rack-brompton-%E5%BE%8C%E8%B2%A8%E6%9E%B6-BIKEfun-%E6%8B%9C%E8%A8%AA%E5%96%AE%E8%BB%8A-%E5%B0%8F%E5%B8%83-%E8%BC%95%E9%87%8F%E5%8C%96-%E8%BF%B7%E4%BD%A0-i.18239872.13857674823?sp_atk=92c9813e-99e1-4965-bde7-ab6db01d8bc6&xptdk=92c9813e-99e1-4965-bde7-ab6db01d8bc6
easy wheels我在輪粹官網購入。網址如下
www.lane-trip.com.tw/products/eazy-wheel-rollers-kit-6mm-holes
好像都漲價了😅
這個新版的後貨架是推薦70mm的易行輪。找得到的70mm輪ㄧ組4個要價不低😂