Building a pneumatic power hammer.
HTML-код
- Опубликовано: 7 июн 2020
- my webshop - gentilknives.dk
my instagram - / gentilknives
In this video we make a pneumatic power hammer. The power hammers weight is 14 kg (31 Ib).
I was very surprised how fast the hammer could move hot steel. I believe this power hammer would be a great addition to a blade smiths workshop, so let me know if you would be interested in me make one for you.
Thansk for watching 
Наука
VERY NICE welding!!! The BEST I've seen in a LOOOOONG time!
That power controller is taking quite a beating and can't last long. I would mount it separate from the hammer. Nice work, far better than all these crazy tire and leaf spring concoctions.
I was blinded by your welding, your whole movie was welded
Spray Transfer MIG Welding is such an efficient process, and it leaves a pretty decent looking bead also.
That little beast can really move some steel, would have been cleaner work had it been bolted to the floor
Impressive work none the less.
In future you should look at dove-tailing the Dies the anvil post and the ram and making a set of shims to
hold them in place, it would take about a half hour or less of extra work on your mill and about 10 minutes
at the forge for the shims (I use H-14 Air Hardening/Hot-Work Steel for the dies and Forklift Tine for the
Shims.) For the pins and tails of the joint, and the shims it takes me roughly 25-45 minutes all in all.
That is if my shoulder is cooperating ;-)
As an added bonus you wont have to worry about nuts and bolts coming loose... or pins shearing off from repeated
strikes... which really is Not a good time any way you look at it.
Vero Gold Brasil
Can you list the control mechanisms you used for this or post some links thx
Amazing Work You Do!! If I could Buy one from You , I would
You almost sound like Yoda.
That wobble tho lol
How many CFM does it take to run? I thought about doing one like this before as its a pretty simple idea but it takes a lot more air to run than I have available. I think it might be cheaper for me to do a press first just because of the cost of a large compressor. Very nice job on the build.
No shit, that's why there was a music over lay, because the 100,000+CFM compressor was running the whole fucking time.
@@PTcruser65 why such a dick man. It was a simple question how much cfm. No shit I realize it takes a lot and his compressorwas running. Thats why I asked how much. No reason to be a smart ass when you haven't got a clue the answer.
Google cricket air hammer.
Working like this which accessories or parts you used
are you going to make plans available i wouldn like to build one of these looks like the right size for my shop
Alan Southwood
the plans are available at my webshop - link in the description
Looks really well made but it's wobbly. Maybe add 2 triangles at the back of the plate for some rigidity
Yeah I know, it was a custom order for a costumer, so It didn’t make sense to secure it to the floor when it had to be shipped the same day
Life is knife 🔪
Nice work.. fill some empty square tubes of the hammer with concrete to give the hammer some more stability of weight ..
Man I feel your pain ....I’ve built all kinds of hammers and presses till I found the design and weight I wanted
I feel this was another waste of time like when I built a 7 ton press and had to upsize the pump for more smashing power
Clean welds and great fab work my friend but I bet you’ll be making a bigger one next 🤦🏻♂️👊✌️ (all learning)
If you secure the anvil you'll get a lot harder hit out of each blow. Maybe just weld it to a plate that you stand on
Should pour a small slab to mount it on
What's the music?
Do you own all of your equipment?
this pneumatic hammer in my book fast see youre video in llearn so .much about pneumatic hammer Thankyou bro love you form 🇦🇫
Can you share the cost for the machine?
If you are interested in purchasing one please write to me at : sales@gentilblacksmithing.dk
Have a good day
Actually there is one huy who build a power hammer like yours but it can also do soft strokes depending on how much he pushes the pedal.
The video also includes a plan for the pneumatics.
ruclips.net/video/PumDaJ9IlZw/видео.html