Thank you for this video. I needed to open up my remote to clean some gue from the volume button since it was sticky. After cleaning and reassembling the remote it was all good.
Thanks bro, my kids kept using the remote with dirty hands and got crap into the rocker switches for the volume, manage to follow your video to get down to it and clean it out.
Thanks for this, mine stopped working last night completely. Took it all apart this morning as per your instructions, cleaned up all the corrosion and gunk from the battery related wiring and now as good as new. 😄
Now they have buttons for Netflix and amazon that I don't care the least, hopefully I can put a piece of plastic film do deactivate them!! Thanks a lot
great vid sir .wonder if you can help when i try to press the black button on the back nothing happens just wont budge, any suggestions would be great many thanks.
@@thejordaniangerman2589 thanks for the reply,been trying for seems like hours but the button just springs back even tried a stanley blade i know without seeing its hard for yourself to solve but thanks so much for replying
Just to clear that. If the Remote is the same then it should slide. But as to give u an Idea it slides from the front.. and the Back is a fixes cover and doesnt move. I hope it works. Good luck
Useful info - the plastic strip to get the inside to slide out. However the video itself was poor.A lot of it dark and out of focus and in too many shots your hands were obscuring what you were actually doing.
Thank you for your comment and tips. Its true what you say and that was my first video without any help or tools. Will take all what you said in consideration and wish you a great day.
Hi. I did intend it as a constructive criticism and I’m glad you have accepted it as such. It was a great help though - I would never have managed to open it without your guidance
constructive criticism is always welcomed. It took nearly hours to open the remote the first time and i thought many would profit from this video. Am glad i helped in a way or another. And i hope you fixed your problem.
You have got the bottom spring wrong. It needs to fall into the notches of the bottom plate. You have the spring upside down. The spring goes into the round hole through the motherboard to the other side. From what I see you have it upside down. Am I correct ? I just disassembled it and cleaned it as well.I had the problem of draining the battery after replacing the batteries. I hope it will be fine. After all doing this you need to pair it with the TV again to get the blinking away.
Hi great video, I have a question if you could help please...I have the same remote but the battery went flat so I used the other remote for a while.....now I've replaced the batteries and it won't work, the red led light doesn't flash when I press any buttons. If I was to open it up what would I need to do to make it work again? Any help/advice would be great
Hi. If it doesnt light you need to check two things. First make sure that the new batteries are really new. For example try them on another device. Second is to make sure there is no white debris or calc on the metal part in the remote where the batteries fit. It may cause current connection issues due to having the batteries inside and not using the remote for long. Regards
Hi thank you for your reply, I checked and the batteries work on another device, I also took the old batteries out of the remote when they stopped working then realised I never had any new ones at home so just used the other remote, there doesn't seem to be any white residue in the battery compartment so was thinking it could be something internal in the remote but im not sure from watching the video if there is anything that could have come loose etc which could cause it to stop working
I dont think its something internal. Check if u r putting the batteries the right way inside + and - wise. Sometimes they are the other way around. Sometimes i did that 😂
😅..I have checked and they are in correctly it seems, both batteries insert with the + at the furthest away from the volume and channel selectors and the - closest the vol/channel buttons... i honestly can't think what it could be 😬 Im guessing the remote must have broken but can't think how, I left it in a draw since the batteries went flat. Thanks for the help
Hi, my remote not closing properly. my kids done something I dont know what happened I'm trying to close but its not closing properly. what should I do? Please give me tips. Thanks
The only reason i could think of would be that the black open/close Button on the back is stuck and need to be cleaned/lubricated. Try to clean it put one tiny dot of machine oil like the ones for the Haircut Machines and press alot on the button to make it work properly again then try to close the remote. Or after closing it hit with ur Finger on it till it clicks. I hope this work
Hello. I think something is sticking the parts together. It should open. Try to press on the butoon and pushing the inside part out, if not try to shake the cover but hitting it on all sides of the silver cover on the palm of your hand to try to break any dry sticking material between the cover and the black part inside. I hope it works out.
Hello. Try to clean it with some alcohol on an ear cleaning tip while the batteries are removed and make sure it gets dry before you try to put it back together. Make sure also that the batteries are good. Sometimes having liquids or dirt on the Motherboard wouldnt let it work. Good luck fixing it.
@@ramialdaoud2942 I just manage to repair it, i put some tape underneath so it can make better contact with the button. This tutorial helped me a lot, and saved me some money- so i thank the maker and wish him good health and many happy years !
You just have to press on the button on the back side and while pressing push the inlay from the Housing upwards. If its stuck you need to apply more pressure untill it comes out.. if it doesnt help try to warm the top part of the remote with a Hair dryer.. but be careful no to heat it a lot espicially to part where thebatteries are.... otherwise you will ruin it or the batteries may explode.
@@thejordaniangerman2589 I've tried everything to get the housing to release but it is absolutely stuck. Maybe corrosion inside is keeping the housing from allowing the components to slide free?
This totally works! Thanks so much for the tutorial. The little piece of plastic is genius!
Thank you so much
@@thejordaniangerman2589 it uuu usually
Aaqa q@@ASHURA0121
Thank you for this video. I needed to open up my remote to clean some gue from the volume button since it was sticky. After cleaning and reassembling the remote it was all good.
I am glad i helped... enjoy the brand new remote :)
Thank you soo much. You saved my control from worse (was nearly trying to rip it open)
😂 i am glad i saved your controller. I was about to rip mine open before i knew the trick 🙈🙈. Thats why i thought why not make a vedio about it. Enjoy
Thanks a lot! This really helped me out.
Thank you for this. This video has helped me twice already!
Thanks to you I was able to dismantle the remote, clean the water damage and reassemble it, now it works
Thank you
I am glad i helped
Thanks bro, my kids kept using the remote with dirty hands and got crap into the rocker switches for the volume, manage to follow your video to get down to it and clean it out.
I am glad i helped
thanks a lot! I used a butter knife instead of the plastic thing.
Great idea😂. Glad you found your way.
Gracias..
Me fuiste de mucha ayuda.
Just what I needed. Thank you.
You are welcome
THANK YOU THREE TIMES. YOU ARE THE BEST.
You are more than welcome
I accidently spilled coffee on my remote and had to disassembly it to clean it with some IPA XD Your video help a lot, thanks!
I am glad the Video helped
Thank you for this tutorial. Thanks to this video I made my remote work again.
Thats great. I am glad i helped.
Thank you! I really needed to clean the buttons! Now it works like new again.
You are welcome :)
Really helpful video.. Thank you so much for sharing. My remote is now fixed
You are very welcome. I am glad i helped. :)
Dziękuję. Dobra instrukcja.
Thanks you had save my night!
Am glad i did.... you are welcome
Mashallah! Merci! 👍 Sucsessfuly disabled the Rakuten button, ambient thingy and other nonsens at my remote control.
Merci ! 😉
Thanks! Helped me to repair my remote today.
I am glad i did
Thank you.. That was what I need and its works.. Good video.. Greetings from Germany
Sehr gerne :)
Thx mate i was struggling to figure out how to get it apart for cleaning greatvid mate
I am glad i helped. Enjoy
My remote control working now thank you 👍
Happy to hear that. Congratulations
Thanks for this video, it was very helpful!👍👍
You are welcome. I am glad it helped
Just what I needed to know!!
Gracias por el vídeo, me ayudó mucho!!
You are welcome
Thanks for this, mine stopped working last night completely. Took it all apart this morning as per your instructions, cleaned up all the corrosion and gunk from the battery related wiring and now as good as new. 😄
Am glad i helped
Thanks!
Thanks. It heleped me to safely remove the annoying netflix/amazon/rakuten buttons
You are welcome
thx, was really helpful
You are welcome :)
Thank you it really helped me
You are welcome
thanks bro i repaired mine bc of you
Am glad you did. You are very welcome
Thanks a lot !!!
You are more than welcome. It seems a lot of People had the same Issue :)
Thanks buddy!
You are welcome
Thank´s!
You are welcome
Now they have buttons for Netflix and amazon that I don't care the least, hopefully I can put a piece of plastic film do deactivate them!! Thanks a lot
Thanks 🙂
You are welcome
great vid sir .wonder if you can help when i try to press the black button on the back nothing happens just wont budge, any suggestions would be great many thanks.
Thank you so much. Press on it and try to push it outwards at the same time. I think its just stuck inside
@@thejordaniangerman2589 thanks for the reply,been trying for seems like hours but the button just springs back even tried a stanley blade i know without seeing its hard for yourself to solve but thanks so much for replying
Just to clear that. If the Remote is the same then it should slide. But as to give u an Idea it slides from the front.. and the Back is a fixes cover and doesnt move.
I hope it works. Good luck
Nice song :)
:)
Useful info - the plastic strip to get the inside to slide out. However the video itself was poor.A lot of it dark and out of focus and in too many shots your hands were obscuring what you were actually doing.
Thank you for your comment and tips. Its true what you say and that was my first video without any help or tools. Will take all what you said in consideration and wish you a great day.
Hi. I did intend it as a constructive criticism and I’m glad you have accepted it as such. It was a great help though - I would never have managed to open it without your guidance
constructive criticism is always welcomed. It took nearly hours to open the remote the first time and i thought many would profit from this video. Am glad i helped in a way or another. And i hope you fixed your problem.
I wanna get one for my samsung smart tv and use the wireless that have do you think gonna worked?
I dont know. U have to try
Mine went completely unresponsive, hoping taking it apart to clean it helps!
I hope that too. Good luck repairing it
You have got the bottom spring wrong. It needs to fall into the notches of the bottom plate. You have the spring upside down. The spring goes into the round hole through the motherboard to the other side. From what I see you have it upside down. Am I correct ? I just disassembled it and cleaned it as well.I had the problem of draining the battery after replacing the batteries. I hope it will be fine. After all doing this you need to pair it with the TV again to get the blinking away.
I dont think its the wrong way around. It worked well this way for me. I hope it works well for you too
Your instructions were clear: don’t try to pry off the front first. I messed up. Can confirm: the front will break. Lol
Lol.... yes its tricky somehow
Thanks you save me 100 DLS...
You are welcome
Hi great video, I have a question if you could help please...I have the same remote but the battery went flat so I used the other remote for a while.....now I've replaced the batteries and it won't work, the red led light doesn't flash when I press any buttons. If I was to open it up what would I need to do to make it work again?
Any help/advice would be great
Hi.
If it doesnt light you need to check two things.
First make sure that the new batteries are really new. For example try them on another device. Second is to make sure there is no white debris or calc on the metal part in the remote where the batteries fit. It may cause current connection issues due to having the batteries inside and not using the remote for long.
Regards
Hi thank you for your reply, I checked and the batteries work on another device, I also took the old batteries out of the remote when they stopped working then realised I never had any new ones at home so just used the other remote, there doesn't seem to be any white residue in the battery compartment so was thinking it could be something internal in the remote but im not sure from watching the video if there is anything that could have come loose etc which could cause it to stop working
I dont think its something internal. Check if u r putting the batteries the right way inside + and - wise. Sometimes they are the other way around. Sometimes i did that 😂
😅..I have checked and they are in correctly it seems, both batteries insert with the + at the furthest away from the volume and channel selectors and the - closest the vol/channel buttons... i honestly can't think what it could be 😬
Im guessing the remote must have broken but can't think how, I left it in a draw since the batteries went flat.
Thanks for the help
Try to reboot the remote. Remove the batteries then press the on/off botton for 8 seconds then reinsert the batteries
Can you say me for what TV you are using that remote it is qled or led how many inch model name
Its a 55 inch full HD Samsung Smart tv
Hi, my remote not closing properly. my kids done something I dont know what happened I'm trying to close but its not closing properly. what should I do? Please give me tips. Thanks
The only reason i could think of would be that the black open/close Button on the back is stuck and need to be cleaned/lubricated. Try to clean it put one tiny dot of machine oil like the ones for the Haircut Machines and press alot on the button to make it work properly again then try to close the remote. Or after closing it hit with ur Finger on it till it clicks.
I hope this work
Thank you Thank you so much, I will do it today 🙂
thx , I filled my remote with beer yesterday , now is it dry and empty :)
Thats Amazing. I am glad you were able to fix it :)
Hi. I have this remote and the clip on the back will not release it or open it at all. Any ideas?
Hello. I think something is sticking the parts together. It should open. Try to press on the butoon and pushing the inside part out, if not try to shake the cover but hitting it on all sides of the silver cover on the palm of your hand to try to break any dry sticking material between the cover and the black part inside. I hope it works out.
Hola súper ya lo abrí pero el control no me da para la derecha que debo hacer?
Hello. Try to clean it with some alcohol on an ear cleaning tip while the batteries are removed and make sure it gets dry before you try to put it back together. Make sure also that the batteries are good. Sometimes having liquids or dirt on the Motherboard wouldnt let it work.
Good luck fixing it.
Thanks! Could finally fix those sticky keys. Probably caused by spilled coke. Of course the kids did not do anything... 😏
You are welcome. Sticky keys are awful. Ofcorse the kids do nothing at all. 😂😂
The left button doesnt work( led doesnt shine) so i opened it, cleaned it but still doesnt work.
Do you think its the motherboard? Or any ideas?
Try new batteries or to reset/restart/reprogram the remote through pressing the power button for 15 seconds.
Otherwise its maybe defective.
Regards
@@ramialdaoud2942 Thank you, tryed it but still doesnt work.
@@alinnimeni3789 sorry to hear that
@@ramialdaoud2942 I just manage to repair it, i put some tape underneath so it can make better contact with the button.
This tutorial helped me a lot, and saved me some money- so i thank the maker and wish him good health and many happy years !
@@alinnimeni3789 that’s amazing. Very happy for you. Am glad i helped somehow. Have a great day.
how do you open a stuck one? Housing won't push up to even allow the change of batteries. Need help
You just have to press on the button on the back side and while pressing push the inlay from the Housing upwards. If its stuck you need to apply more pressure untill it comes out.. if it doesnt help try to warm the top part of the remote with a Hair dryer.. but be careful no to heat it a lot espicially to part where thebatteries are.... otherwise you will ruin it or the batteries may explode.
@@thejordaniangerman2589 I've tried everything to get the housing to release but it is absolutely stuck. Maybe corrosion inside is keeping the housing from allowing the components to slide free?
pls can someone help me with it
When i press my button, my house does not pop, any ideas?
Then press the button and push toward the outside... the problem will be that its sticky due to dirt or fluids or due to that the spring is defective.
que hago si el control le entra agua??
abra el mando y límpielo y déjelo secar y cambie las pilas
@@thejordaniangerman2589 gracias
Y si me dices coml arreglarlo mejor aún jajaja
but you know when i press the black button it does not come out
Press on the Button und push upward. It maybe stuck inside. Press hard dont worry it wont break easily.