MK4 Golf / Jetta / Bora Cluster mods - needle sweeps and more!
HTML-код
- Опубликовано: 8 сен 2024
- it's Cluster mod time!
Before starting please have a read on this website so you are informed about the cluster you have and if it's even possible.
www.users.on.ne...
Next you will need to download eerprom programmer from this link, you'll need to register.
www.digital-ka...
Then finally download dashdumpeditor from this link. you'll need to translate the webpage.
www.drive2.ru/...
Enjoy the video ☺️
I AM YOUR 1000 SUBSCRIBER
Thank you so much 🙏🙏🙏🙏
1000!!!!!
Buen video
Thank you🙏🙏
Hello mate, i did everything that u showed in the video but when i saved my cluster data into pc, and load it into dumpeditor i have like only 3 things avaialable, does it mean that my cluster cannot do needle sweep? I have VW Bora mk4 v6 with cluster 1j5920845a (R. VDO v09) if someone can help hmu please ❤
Hello mate, i have a VCDS program with hex+can v2 interface...Do you know if that interface works with the vag can commander and DashDumpeditor programs?
It doesn't work using that cable.
You need the blue KKL cable from ebay.
Hi. I'm trying to read with a blue kkl cable, but in vag commander at COM PORT section it's nothing showed. Do you know any solution? In Device Manager(Win 10) it's showed the usb 2.0 serial
Hey look for the usb with cable name beginning with CH like in my video.
Don't forget to subscribe :)
Amazing informations mate... congratulations! I will start a project to make a 1.8 20v turbo with dq250 and I will need help rsrsrsrs I hope that you could help me lol. Thank you so much
Haha dq250 is a big job, I'm unsure what's needed to code that in. I think as a minimum you need to be running me7.5 but isn't quote me on that! Haha
I managed to edit my cluster, the question is, what the rear door warning does? It is disabled for me. And when I open the door it shows me already.
No idea haha let me know if you find out!
Hello, i tried to do as you said but it says my EEPRON is blocked, any idea what could be wrong or how to unblock it?
What cable are you using?
@@ajrveedub kkl 409.1, i also have original vcds with cable
@@Tomek97cz in that case check if your cluster is compatible. Check this out - www.users.on.net/~graeme86/sweep501/sweep501.html
@@ajrveedub well i found out that i have VDO 05 on sticker but code is 0.88 which is lower then probably yours. Is there any way how to update them?
now i tried to load EEPROM with updated version and no change, so i need to swap for newer dash. anyway thx for your time.
Do you know if this works on older Suzukis like 06?
Nah sorry couldnt tell you
Hello mate! Can i use these programs without make needle sweep , to change my cluster on skoda fabia 1 (no mfd)?
Sorry I'm not sure if the fabia works with this method 😅
If I can’t do it with Carista then forget it. That’s way too many steps.
Hi! I have a Seat Leon 1M FR cluster with no fis, I was wondering if I can modify the EEPROM with DashDumpEdit to activate needle sweep, I've tried to read the eeprom with VAG EEPROM Programmer and I always get errors, "eeprom area blocked can't read it" or "rx timeout", I'm using an AliExpress cable VAG-K+CAN Commander 1.4. Please help!
Unsure on Seat Leon side of things sorry!
Which software are you using please ?
I used eeprom programmer app to read and download cluster file.
I then used dashdumpedit to edit the cluster file to make all changes I needed to then upload to the cluster.
Can you drop the link of the blue cable on ebay?
www.ebay.com.au/itm/115746830949?mkcid=16&mkevt=1&mkrid=705-154756-20017-0&ssspo=d1u9qyVZQOy&sssrc=4429486&ssuid=2LK2-6FnQOm&var=&widget_ver=artemis&media=COPY
Hey mate, when I read it says no ECU found, what is the problem?
You can't read the ecu. Just the cluster. To read ecu it's a different app.
Yes, but when I read the Dash it says ECU not found, I mean strange.., I use use the same cable like you.
I installed the kkl cable driver and the VAG eeprom, I need to install something else?
@@poppa.9067 Cable is right! Did you set the com ports correctly? Check out the part where I show where to set the com port either 1 or 2.
@@poppa.9067 Around 5.15
Hello i have vcds cable 18.2 can i use it to run eeprom ?
Nah you need KKL cable
Can this be done for 99 b5 TDI passat ?
That's a good question! I'm not sure to be honest
Hi, did u tried?
El sitio ya no funciona
I cant seem to download the file from the forum and ive posted and am able to download other files just not the one you linked
I'll try and look for those files to upload and share the link 👍
@@ajrveedub ive found it already the link didnt work tho
@@thomashielkema1083 glad you worked it out! Anything else missing? Can you send me the link to update the description thanks!
Go into device manager and look after ports. Look for the cable name starting with a ch.
Can this be done on a 2003 golf 1.8t gti? I've tried using vcds and no luck..
Some clusters yes! Gotta check cluster versions tho
Did anyone got Dash Dump for free couse i cant find < please who have it send me >
I'll see if I can find a link or upload it