Puddle Recognition Tips For TIG Welders -Part 1
HTML-код
- Опубликовано: 17 май 2024
- Garrett, aka The WeldinOkie ( / theweldinokie ) , is here to show you some tips on puddle recognition for TIG welders.
Don't forget to download the WELD™ APP, check out our member Discounts through our brand partners and links to our podcast and social channels here: linktr.ee/WeldDotCom
Disclaimer: As an Affiliate and Industry Influencer, Weld.com earns from qualifying purchases via our posted links and affiliate links. Videos produced and made available by Weld.com or any of its affiliates, subsidiaries, or representatives (collectively, "Weld.com") are provided for informational purposes only. Although every effort has been made to provide the most accurate and useful information from sources believed to be reliable, no warranty, expressed or implied, is made regarding accuracy, adequacy, completeness, legality, reliability, or usefulness of any information. As tools, products, materials, equipment, techniques, and applicable laws, regulations and ordinances are constantly changing, Weld.com cannot and does not assume any responsibility or liability for the accuracy of the information contained herein. Under no circumstances shall Weld.com be responsible or liable in any way for any content, including but not limited to death, injury, errors or omissions in the content, or for any loss or damage of any kind incurred as a result of any content communicated in a video, on a website or by other means, whether displayed by Weld.com, or a third party in its original or a modified form. All content is subject to Weld.com and any third party's applicable terms and policies. Carefully review all terms and policies.
ALWAYS USE CAUTION WHEN UTILIZING ANY DISPLAYED TOOLS, EQUIPMENT, TECHNIQUES OR PROCESSES. IF EVER IN DOUBT, CONSULT A LICENSED PROFESSIONAL. ANY RELIANCE ON THE PRESENTED INFORMATION IS STRICTLY AT THE VIEWERS OWN RISK. EACH VIEWER EXPRESSLY AND VOLUNTARILY ASSUMES ANY AND ALL RISKS INCLUDING, BUT NOT LIMITED TO, DEATH, DISABILITY, AND/OR SERIOUS PHYSICAL INJURY RELATED TO THE USAGE OF ANY TOOLS, EQUIPMENT OR TECHNIQUES OR PROCESSES IN THE PRESENTED CONTENT. IN THE EVENT OF AN INJURY IMMEDIATELY SEEK MEDICAL ATTENTION.
That was one of the most informative TIG videos I have seen (out of thousands probably) I just realized I have not been paying enough attention to the poll behind the arc, I have been too focussed ahead of the arc and the tip of the filler rod. Thankyou. I will do better tomorrow
@The Weldin Okie I love the detail! I’m an amateur/semi pro, but I’m pretty good, so this level of detail is perfect for me.
@The Weldin Okie I'm in Oklahoma. I'm in TWS now. Do you offer classes??
First time here, been welding for over 30 years. I have done every kind of welding there is. Curious to see what these guys do.
Doing TIG in school right now and this is gonna help me have that bit of a jump, so thank you!
There's a knob on the back of your machine. Flip it from "LUMPY" to "SLICK". I'm out here in Oklahoma too. Keep making rods burn and heads turn brother and if you have any ponds I can fish Holla atcha boy. Good video, Bro. Cool channel.
I'm in school and this is very helpful for me. Thank you!
Your freehand is awesome. Probably the best freehand I have ever seen.
great information here....thanks Weld.com and gang.....
allot of good information BUT all you guys that are learning this one of the best ways too learn is mistakes
you need too burn through the material AND not enough heat is also good…when you know your am sweet spot add and remove 10-15 amp in order too see what happens. burn through the work as much as you can, this is better than trying too get it right! after you do this many times you will definitely be a better welder!!
In my dirt bike days, i only got food after a few falls, learning anything is no different. i see the internet teaching everything but this and too me being comfortable (after a few) with burning holes takes allot of the fear that something might go wrong away…leading too a better weld!!!!
Can't wait to see....Bravo, Paulie B
Great video man. Super detailed and easy to understand. Probably best one on this channel so far for understanding tig welding.
@The Weldin Okie well I will be lootpit for your videos. I have been looking for this kinda break down and what to look for for a awhile myself. I'm just self taught in my garage and this will help for sure.
@@Billybong12088 be sure to download the WELD™ app on iOS or Google Play we are adding a ton of educational content that will not be shown on youtube
Great video very informative. You make it look easy
That’s an awesome video and well worth the time.
Keep ‘em coming
I've never Tig welded before as Tig was relatively new back in 82 when I learned... This looks a lot like regular oxy torch welding was taught way back when. Our instructor used to give us old exhaust manifolds to repair, (I think he had a deal worked out with a local shop ;-), and these techniques would apply to brazing cast as well!!! Excellent video and if I ever get an oppurtunity to learn Tig, I'll definitely come watch this again!!!
yes, TIG welding had only been around for about 40 years in 1982, since it was invented in 1942 by Northrup Aircraft and then marketed by Linde [Union Carbide, now ESAB] in 1946 or so
i appreciate all of this through and through been teaching my self which i know isnt the best because learning wrong sticks with you but good info, im currently at home and off for the next two days but damn i want to buy a second welder to keep at home to keep practicing im currently rocking a good old china made eastwood mp250i elite
I'm wondering what kind of machine he's running?
Hello garret, thanks I've never seen such a good explanation, top. One more question, i'm from germany, where can i get these cool handles and torch caps? many greetings Michael
Thanks
Nice I follow him on the gram he’s good 👍
Badass video. have done shitty welds in my friends garage but this is a great video to understand how to learn on how to make a good weld.
Thank you!
You're Powerful
I know one thing I need to practice on is I need to start trying to teach myself how to walk the cup!!!
If you have a torch(tig torch)
Get a pen and pull the ink cartridge out and place It into the collet body were the tungsten goes into. And practice the motions with that on paper.
Relax your wrist and try it out👍
what size is your tungsten?
I love Mikala
How much does surface texture matter? 36grit vs 80grit?
@The Weldin Okie I think he is referring to the grind marks in the material......if it has an effect on puddle movement. and penetration
@@ypaulbrown exactly
@The Weldin Okie 24grit finish vs 36 vs 80 vs120. .does it matter?
It's a nice explanation this video, great short course but, you should have done demonstrating with let's say cup 8 or 7 something you usually find in every company, small fabrication facilities and such, not the damn Furick cups. I mean start with the first step on the ladder not the top one...
Wolf, why not buy the proper cup that you need with your own money if it means doing a quality job and keeping your job. Auto. Mechanics and Machinists buy their own tools....
TIG welders have been making successful welds walking the cup long before the Furick cups were available, however the presenter made it clear that this is what he prefers, and having done some cup walking I can see how such a large cup would be advantageous. If you don't want to use the Furick cup that's fine, you're technique won't differ that much just jump in and practice.
👍👍👍
These dudes must think they’re the Super Bowl or something with all these premieres
DITTO!!!!!! AND PORN, EVERY TIME I REFRESH, BAM 3 MORE!!!!!!!!!!!!! RENAME IT WELDING PORN,COM🤣🤣🤣🤣🤣
👍🤘🤙