Temperature Towers Using Cura Calibration
HTML-код
- Опубликовано: 11 сен 2024
- Printing a temperature ranks high on the list of things you should do to take your 3D Prints from average to amazing. They don't take long to setup and well worth the effort it takes. This video not only shows how to make a temperature tower but also explains why.
Some how, this guy has mastered simplifying these processes MUCH BETTER then top tier RUclipsrs with reasonable quality. Love your videos sir!
You have obviously put a lot of thought and planning into this video and the excellence shows through! Keep on posting these videos, they are a valuable asset for 3d print crazies... like me!
Awesome! Thanks for the kind words and thanks for watching!
I just found your channel even though I've been printing for a few years now. I appreciate the way you share info in an easy-to-underatand way. I've subscribed and will recommend your channel! Thanks!
Thank you very much! I appreciate the kind words. I started this channel to help the people getting started that don't know where to go. The fact the somebody with your experience found the channel and subscribed is beyond my wildest dreams! Thanks for watching and thanks for subscribing!
This video was EXTREAMLY helpful, as I just purchased a Mingda Magician Pro 400x400x400, and new to 3D Printing.. my needs are for printing Carbon / Nylon car Parts for my 1937 Pontiac SilverStreak. having a few filaments (will try and keep to the same brand); this test will ensure my Cura settings are as good as it will get per filament type.. the hint about calculations and post GCode was wickedly helpful!
Thanks for the kind words! You have a nice size printer!!!
Wow I think your channel is the best on RUclips! Just finished watching several of your videos. My ender 3 is several years old- it was in storage for some time and initially I upgraded many things on it except the firmware. Updating the firmware is totally out of my wheelhouse! It prints, ok but not too accurately. Mostly printed model airplane parts and stuff that accuracy wasn’t an issue. Thanks for your videos…I think I’ll tweak some of the settings on my old Ender 3 and see if I can make an accurate cube.
Thanks for those kind words! Now that the printer is out of storage, keep on printing! Thanks for watching!!
I honestly think if you hired a videographer and video editor, could explode your channel, with how much important information you have. Every time I watch one of your videos I am blown away with how much I learn.
If the channel grows enough, I would like to do exactly that!
Great video THANKS! One thing you forgot to mention was that you have to copy script under parts for calibration to get the temp tower script added to the post processing tab.
Very good information and excellent instruction. Thank you.
Glad it was helpful! Thanks for watching, look for new content coming soon!
Thanks for the explaination ! Clear and simple ! Subscribed.
Thanks for the kind words! And thanks for watching!! You might want to check out the video on AutoTower Generators. Same result, but a much easier path! Thanks for watching!
@@pushingplastic7445 Gonna give it a try !
Not sure how much it goes in producing these videos, but th quality and scripts are top noch🎉
Thanks! I appreciate that! It's not as easy as I thought it would be, especially for a one-person operation! Thanks for watching and for the kind words!
Good information, Not to put Curu down But Matter control has the same Temp Tower and you just select it from the library and all is setup and ready to print in just a few clicks, just set your resolution/layer height and print.
Honestly anyone looking for videos on temp towers would be better served learning to build the code themselves so they can understand how it works. It's great background.
Great video, great explanation and great channel. Thank you
Awesome! Glas it was helpful! Thanks so very much for watching!
Ya but...? I want to run 0.3LH with ASA/ABS. If I change the Layer Height will it not give false results for when I run at 0.3?
Good information. Would love to hear more about your choice of that other temperature tower from thingiverse. Thanks.
Sure! There's a little bit more that you can learn from that tower. The Arc on the left side of the tower, it gives a good indication of how a particular temperature handles overhangs. Also on the left, there is a wall that tapers from front to back provides some feedback on how a particular temperature with walls of various sizes will print. As the wall gets thinner, you might see more stringing. On the right side, there is a circle with a spike in it. Look for stringing in there. The spike also tapers from bottom up. I look to see if the spike is broken. The spike can give you an idea on how well a particular temperature will do fine detail. Besides those things, you still get to see what temperature does the best with bridging. The other towers really only show bridging and stringing. By looking at the one from Thingiverse, I look for the temperature that gives the best bridging, the best overhangs, the least amount of stringing, the best detail and least amount of layer separation. If I have two temperatures that look equally well, I use the lower temperature of the two. Thanks for asking! And Thanks for watching!
@@pushingplastic7445 wow thanks for a detailed explanation. I am just starting in this with a new printer. Your videos are useful. I have been binge watching them one after the other 😀
One quick question about this thigiverae tower again - do I need that post processing gcode like you showed in your first tower video? I think it will be helpful for newbies like me to see a dedicated step by step video from beginning to end on this one. Hope you can make one soon.
Keep up the great work. Subscribing your channel.
@@ashokmoghe8035 No problem! If you download the temperature tower from Thingiverse, load it into cura like any other file. Then follow the instructions in the video at 9:30 mark. In the dialog box to modify the GCODE, Add the script TempFanTower, set the Starting Temperature to 225 degrees, the Temperature Increment to -5, the Change Layer to 50 and the Change Layer Offset to 7. Slice and print! I hope this information helps and thank you so much for watching and subscribing!
@@pushingplastic7445 thanks a bunch. About to graduate from successfully printing the sample filament PLA to PLA+ I bought in the store.
Guess I got to follow your video and try the temperature tower first.
Thanks again.
Ha - thank you. The rounding bothered me too. I was like "but that error is going...somewhere..."
It took me a while to figure it out!
Thank you helped a lot.
Hope you're breathing gets better.
LOL, I get that one! You should see the parts that get cut because of that! Thanks for watching.
I have problem. In my Ultimaker Cura 5.3 version missing post processing scripts. I click on the add a script and there missing . What can i do ? Please help me anyone
Please I beg you to make a detail video on bridging using Creality slicer
Coming soon!!!!!
Great video, great explanation. Thanks. I’ve noticed that Cura now has a specific Temp Tower download. I’m brand new to printing so this is my first attempt. I’m assuming that even though it is a preset download I will still need to set my own G Code parameters.
Try the auto tower generator, it’ll make the g code for you. I have a video for that on my channel
@@pushingplastic7445 Thanks, I only found your channel this morning. I’ll watch that now. I’ll have a look through your back catalogue as well. To me your videos are so well put together. Thanks for taking the time
@@robinparkes988 thanks for the kind words & thanks for watching!
If only I had looked through your back catalogue first. Yes, you already covered this. Oops. 🇬🇧
Great Video, Thank You
Supernice Video ! Thank you !
Thank you for the super nice words and thank you for watching!
What is that layer scroll bar on the right? I don't see it on my version (5.6.0)
Question on this please? I have got my temperature set to 220 in the print settings of Cura. I want to print the supplied tower but that temp says 230. My question is do I keep my printing temp at 220 or 230? Thank you!
You have to work the gcode so that you are printing a range of temperatures to determine what temperature works best. But since making this video, I have a newer video that demonstrates a much easier method that takes the guess work out it. It's a quick five minute video, give it a look and see if it doesn't make the process easier. Good luck! ruclips.net/video/fjlGvtNSlYw/видео.html
calibration shapes doesnt exist anymore? what do we use now?
4:45 is when it starts
Thanks😂
what do you do if you can't get the number of layers to a whole number?
I would check out this video, it's more up to date and takes away a lot of the work. ruclips.net/video/fjlGvtNSlYw/видео.html
I bet he can do a good john wan impersonation
sorry I dont understand why youre talking about springing, isnt that tuned with retraction? thanks im struggling with TPU on direct drive KP3s PRO
A few different things can (and do) cause stringing. Incorrect temperature settings is one of them. Determine the right temperature for your printer/filament combo. Once you have that set, do a retraction test. Everybody struggles with TPU. Not a direct drive, but on my Ender 3, when printing 95A TPU, I print at 220 at the hot end, 70 degrees on the bed, I really slow down my speed, to 20. Thanks for watching!
Im pretty new, im using the cura extension and printing flow towers, the flow seems the same all the way up... Not sure why its not changing. Im wondering why im getting the second layer smashing the first layer... It seems ok after the second or third
I'm not sure what you mean by the second layer smashing the first layer? But I'm going to make 2 guesses and hope one of these what you are faced with. Could it be that your Z-Offset is set a little to low and the nozzle is squishing your first layer outward? If this is case increasing the z-offset a little bit could take care of this. Just don't go to high or you'll get no bed adhesion. The second guess would be that your initial layer height is set higher than the rest. It's common to do this. In Cura, I run my initial layer at 0.28 and my standard layer height at 0.20. I'm not sure what printer you are working with, if you have to manually level it of not. If you're manually leveling, you could leave just a little more room between the nozzle and the bed plate. Not a lot, just a little. I hope this helps!
@@pushingplastic7445 sorry yeah it's an Ender 3 max, using glass plate and I can't get it to stick unless it's squishing that filament pretty good. Yeah maybe I'll mess with that initial layer more. Isn't z-offset for auto leveling printers?
@@Jacey2001 The easy fix would be to let a little more distance between the bedplate and nozzle. IF you're leveling the bed with a piece of paper, just try have a little less drag on the paper.
@@pushingplastic7445 I'm using a gap tool, 0.1mm fairly tight.
So set initial layer to .28? Adjusting flow doesn't seem to work that much
@@pushingplastic7445 and thanks for the replies!!!!!
Is this procedure available in a document format?
Sadly, it is not. But I did put up a video on accomplishing the same thing using Curas Auto Towers Generator. It’s pretty much a one step process after you install the free marketplace plugin. Hope this helps!
How do you use the Evanphi temp tower model? Do I just download the gcode he has there and print that? or I download the model and somehow set it up with that?
Don't use dowloaded gcode. While the code for the tower itself might work, there is always the chance that other settings in the gcode could cause you problems. But you can download the model and use it. Just use the same steps as shown for setting up the layer/temperature changes as shown for the version using the calibration shapes tower. You might want to Check out the Cura Autotower Generator plugin. It will setup the tower and gcode for you. I have a video for that on my channel. It's much easier to use.
Awesome, thank you! Will check out your other video. Thank you for the quick response!
I think the tower.. should be printed... seperate and not as a tower.... what If the 1st 2 layers are crappt.... then anyything after... will also be crap....! Thank you for this vid though! Have yet to print mine! Cant find tpu temp tower in g code part....! 7:41! EXACTLY what I was looking for, THANK YOUU! But there are now auto towers... just slice and print!
I was not able to find the extension. I was able to find and add the calibration shapes plugin, but i do not have the TempFanTower extension. I'm using 4.8 because i cannot figure out how to add my Neptune 3 Pro or Neptune X to Cura 5.2. Any help would be appreciated.
I’m looking on Cura 4.1.1 right now. After installing the calibration shapes from the marketplace, restart cura. You should see a pull down menu at the top called “Extensions”. Click on that and select “Part for calibration “. You’ll see a list of parts, select “Add a PLA+ TempTower”. After is appears on your screen, go back to the Extension pull down menu, select “Post Proccessing” and click Modify G-Code. Click the “Add a script” button. This is where you’ll see the TempFan Tower, on the version I’m looking at right now, it’s the 3rd from the bottom. I hope this helps!
@@pushingplastic7445 checked the PLA+ and still am not seeing the script for tempfan tower. There are only 12 options for scripts, so i know im not missing it. Does that script come from the plugin?
@@scottbayreder8699 here’s a link to a video to fix missing scripts for the plug-in ruclips.net/user/shortsJKuqTjS2v0c?feature=share
@@pushingplastic7445 Thank you so much for your help with this!! I am currently printing the temp tower on both printers, about to test all of the filaments that I have. Can you recommend any other calibrations to print that are similar to this one?
@@scottbayreder8699 Awesome! Another calibration print would be a retraction tower to help get rid off f stringing. I have a video for that on the Pushing Plastic channel.
Anyone else just have the Ender 3 extrude the line on the left, then it goes to the back right and just extrude a large blob?
Use tower plug-in instead of shapes
Agree! I posted a video on that too! ruclips.net/video/fjlGvtNSlYw/видео.html
Your videos are so freaking good.