Zen Go Synergy Core - Control Panel Overview & Setting Up for a Session
HTML-код
- Опубликовано: 18 фев 2021
- To make the most out of the Zen Go Synergy Core it's important to learn the functionalities of the Control Panel. Watch James Ivey take you through the software application so you can get yourself ready for a recording session easily.
See the full "Advanced Tips & Tricks": bit.ly/30pgY1k
See the full "DAW Setup" playlist: bit.ly/3fcWTzg
See the full "Getting Started" playlist: bit.ly/2CZCnow
About Antelope Audio
Antelope Audio is a leading manufacturer of analog and digital pro audio equipment such as interfaces, modeling microphones, and converters. Visit us at www.antelopeaudio.com
SUBSCRIBE: goo.gl/17IMzy for more exclusive videos.
Never miss a post from Antelope Audio:
/ antelope_audio
/ antelopeaudio
/ antelopeaudio - Видеоклипы
So I Just Purchased Zen Go...
I’m Here To Say How Pleased I Am With Tech Support from Antelope...
I was having a problem connecting from my end ...
Not only was the team available... They called me back multiple times after they missed my call...
Thank You Much Antelope!!! Theo Write ✍️
Great introduction to Zen Go and how it can transform your home recordings into something bigger 👍 Hard to believe this Les Paul was recorded directly into DI and amp sims 🎸 Thanks James & Antelope!
I would love to have more explanations in this video !
It took me a while to learn it, but I’m absolutely loving it it now
Ok, so I went with this one. Really looking forward to working it.
Very, very good video. I have the ZenQ TB, which is worth every penny, but at least for me the software is not very easy to understand. However, I’m very proud of owning an Antelope Audiointerface!
i'm actually getting either this or the discrete 4, so all the recording videos i can digest is a must. Lol. I will must likely only monitor thru the control panel software though.
오 기대됩니다
Hi, can you confirm that h dsp effects like eq and compressor can also be applied to the monitor out strip?
I‘m getting some Steely Dan vibes here. Nice!
hi. i bought zen go but in 34 pre amp i have very low voice record, and with about 50 to 55 it goes well (i am afraid of cliping in high preamp) is it normal that with 30 to 40 preamp i have low and weak voice? (mic tested: at2035 and rode nt2a. and with sure sm57 i have to set 60 to 63)
Noticed you were using a thunderbolt 3 cable for the interface instead of the usb-c cable that is provided. Any particular reason for that?
is there not a way to turn off mic monitoring? I hear myself at all times and it interrupts my recording in my DAW because i hear myself there AND in the Zen Go control panel.
I've connected my AT2020 condenser mic via XLR (3-pin) and when trying to switch Phantom Power in Control Panel it blinks red and it just immediately turns off. Please help.
Hi. Thanks for the vid.I bought the bundle with Zen Q Synergy, Edge modeling mic and 37(?) plugins and loving it.
I could really use some guidance on setting up gain staging for basic male vocal recording wtih the Edge into Pro Tools. I can certainly dial in an appropriate input level on the internal preamp alone. But I'm trying to understand gain staging when tracking with a few plugins. Specifically, I want to record with a stock Antelope preamp (such as the BAE-1073) and a initial stock compressor (such as Impressor)... leaving room for additional compression in the mix. Any advice on gain staging settings across the hardware preamp, software preamp and compressor is greatly appreciated.
Similarly, what would be my optimal hardware preamp gain setting if I was to record dry and do all the processing in post?
Thanks so much!
Hi Jeff
Congratulations on your new device! It’d be best to discuss the above-mentioned points with our support department via the link below. My colleagues are available 21 hours a day during business days and would be more than happy to guide you!
support.antelopeaudio.com
Antelope Team
Hi have jumped and bought zen go, could you please explain how to set this up with live 11 and being used as a sends which i can commit to recording. also how many effects on channels can be used ???
Hello Chris,
Thank you for your message!
Please reach out to our support department via the following link - support.antelopeaudio.com
Our colleagues are available 21 hours a day and would be more than happy to answer all of your questions about the Zen Go SC.
Thanks u so much for this video 🙌🏼🙌🏼. How do you turn off that green dot next to the lock option at the top of the control panel if you don't mind🤔?? Please and thanks as always 🙏🏼🙏🏼. I'm unable to change my sample rate, and I believe it's because of the lock being active. Not sure how I managed to lock the panel
Hello
Thank you for your comment. It’d be best to check with our support department via the link below. My colleagues are available 21 hours a day during business days and would be more than happy to assist you!
support.antelopeaudio.com
Antelope Team
@@AntelopeAudio Will do, and thanks for the direction.
hi can you tell me more about the usb-c performance . I have discrete 8synergy for desktop want to konw if it compares with thunderbolt
Hello Rob,
For the Discrete 8 SC, the major difference between USB and Thunderbolt use is in the channel count - 24 vs. 32 channels respectively. Also, you can achieve lower round-trip latency over the Thunderbolt connection. With a fast CPU powering your computer, you can go pretty low over USB just as well, at the lowest buffer sizes. Should you have any other questions, we remain at your disposal.
Have narrowed my search to this and the ssl 2+. I work on fl and studio one on a macbook pro.. I should be ok if I get this right
Yes
I plan on getting this and us FL studio as well what's your experience been so Far?
I got a Zen Go today but I've got noise only analog 1 input Ch, as your video shows same noise on ch 1 as well(2:36). I think it is not a ground or floor noise problem, cause ch 2 and other out put is clean. You have any solutions for this?
solution: return and get something else. LOL
I have questions!
_ Is it possible to make independent equalizations after recording the audio?
_ Is it possible at DAW to use Antelope plugins like UAD Apollo Twin?
_ Could you bring us this configuration information?
Hello Vasco,
Thank you for your question! For technical inquiries, please don't hesitate to reach out to our support department via the link - support.antelopeaudio.com
Our team of professionals would be more than happy to answer all of your questions!
Does not have an option/button/control to easily hear a mono mix, does it?
Also, is it correct that the reverb is for monitoring only and cannot be recorded on the way in? You say it "will not" be recorded on the way in, but do you mean it *cannot* be recorded on the way in?
That's a bit unusual, no?
Hello RJB,
Thanks for your comment! There is no "mono test" functionality on the interface. However, we do take such remarks into consideration, this will be forwarded to the relevant department. In the meantime, we can recommend using mono summing on your DAWs master bus instead. Regarding the AuraVerb reverb, yes, it can only be used for monitoring and not during tracking. Printing with reverb is possible on some of our more advanced interfaces, due to their more flexible routing capabilities. Hope this helps! Should you have any other question, we remain at your disposal.
Just received delivery of the Zen Go here and after setting everything up I was very disappointed to find the display's brightness level to be so inadequate and dim. Even after adjusting the brightness level to 100 % it's still on the dim side. It sounds very good but this display issue is just not acceptable so it's being returned.
I can't select the Sample Rate neither the clock source buttons with my mouse. I am on win 10 pro with usb connection to zen go interface. The little white triangles look like not activable and the text near are grey. not white like showed in the video.
But the other triangles for the preamps work fine.
I am fully updated.
Anyone knows why ?
Hello 18 Cats Sat,
Thank you for your message!
Please reach out to our support department via the link - support.antelopeaudio.com
Our colleagues are available 21 hours a day during business days and would be more than happy to answer all of your questions for the Zen Go SC.
I really wish I had enough money to have an entire antelope based studio
please we need more information with logic pro x
In what case should I set the clock source to USB? What's the use case for that?
helpful aren't they
I must be doing something wrong. Should I immediately hear / monitor via the headphones or is there a setting for that. My headphones are not muted or dimmed. I can hear system audio via the headphones but I cant hear any of my inputs. Do you have to set it up with a return from your DAW like shown in video. Is that the only way youll be able to monitor what youre singing / playing?
Did u figure out
@@boutstaxx Ended up returning the unit as the screen was messed up. Oh well!
ok but what`s about LINE input if you record your guitar with a loadbox for exemple ? this is very difficult to found informations about Line input setting, I just get a ZEN and the mixer window make me crazy about this Line input. Always the same story, they want you record guitar with plugins and to buy them...
they are the worst with these videos. so many questions. they ASSume too much
How is the compatibility with Fl Studio 20.8?
Hello Norfsy,
Zen Go SC is compatible with Fl Studio. We remain available!
How do I use SPDIF in my daw? (Protools)
Hi Idriss
While we do not have a dedicated tutorial for that, our support will be able to help. My colleagues are available 21 hours a day during business days and would be more than happy to assist you!
support.antelopeaudio.com
Antelope Team
J'ai un problème avec ma carte de son zen q synergy core . usb .le 48v ne s allume pas.comment régler ce problème .merci
Vous pouvez ouvrir un ticket en français dans notre système de support via le lien suivant: support.antelopeaudio.com/en/support/tickets/new
Merci. J'ai également un autre problème avec les microphones émulation ne s'ouvre pas dans la carte de son zen Q antelope
about to return this interface.....cant seem to get it to work right......ive used 5 other interfaces no problem, and customer support seems to be non existent
Hello
We apologise for such an impression, please let us know your ticket number(s) here or via DM on Instagram and Facebook so we can assist.
Antelope Team
where can i activate direct monitoring?
Hello
Our audio interfaces from the Synergy Core line allow you to monitor directly from your interface, right after the input stage. By bringing up the volume of your channel in the Control Panel’s mixer you will get direct feed of your microphone or instrument into your monitoring system.
Antelope Team
I am sorry I don't get it. there is no sound coming out of the the synergy core, and what channel do I have to bring up there are like 16?@@AntelopeAudio
@@lvy745 It’d be best to check with our support department via the link below for the detailed review of the problem. My colleagues are available 21 hours a day during business days and would be more than happy to assist you!
support.antelopeaudio.com
Antelope Team
not sure why but it's giving me huge click pop and white noise while recording
I bought the go interface yesterday and I didint realize I need a C connection on my labtop but it came with an adapter for USB 3, I plugged it in my USB 3 plugin and playback was choppy and very slow, also I could not turn on phantom power to my mic , I tried on another labtop and USB 3 did not work for it there too... so I’m not sure it actually works with the adapter
So I returned it and got an audient id22 and it works easilyv
How old is your laptop?
Hello Rylan,
Thank you for your message! For technical inquiries, please reach out to our support department via the link - support.antelopeaudio.com
Our team of professionals is available 21 hours a day during the business week and would be more than happy to assist you!
I have my 48v turned on, but i cannot hear my mic? yes its plugged in
Hello IBri,
Thank you for your message! Please reach out to our support department via the following link: support.antelopeaudio.com
Our colleagues would be happy to assist you!
LOL don't expect running Antelope to be a smooth affair. Nightmare after two days. Most likely will return and go back to Apogee.
Got the Zen Go Synergy Core. What a nightmare to set up, running an M1 Mac Mini 16GB RAM. Shouldn't be that difficult.
Returned the Zen Go. Noisy hum, tech support couldn't figure it out.
Antelope interface systems are and have been broken for some time. Save yourself the hundreds of dollars and invest somewhere else. I've been troubleshooting mine since I got it as I thought it was an internal problem. Turns out it's the hardware. Can't get a refund/replacement. If you have Nvidia (like myself) stay away as other people on forums have noted their issues of compatibility. I currently still run my Zengo as I'm more casual and use it as a guitar amp with a mic set up. Someone posted a fix explaining these issues and that being of the power supply not generating enough to run properly. Yeah so consider this your warning if you're seeing this.
tldr; Stay away. I can't believe the guy at guitar center seriously talked me into buying this. Fucking unlucky.
I strongly regret that I bought Zen Go ... that I bought something from antelope at all: (constant problems with everything, connection, drivers. unintuitive and sloppy interface. connecting a microphone always takes 15-20 minutes. and every simple activity requires extensive discussion and learning . everything is complicated here. pathetic for me that you have to google: "how to record sound on Zen go" terrible ehhhh :((( and VSTs are “not that easy” to use in your fav DAW. Bravo Antelope. Rise prices please fo your products!!! Miss my Scarlet
Hello
Thank you for your comment. We regret to hear that the device has not worked for you. Have you reached out to our Tech Support for assistance?
Antelope Team
HOW DO YOU ACCESS THE CONTROL PANEL!?!?!?!?!?!?!?!?!?!?!?! Why keep overlooking this step when the functionality DEPENDS on it 🤦🏾♂️
In the antelope audio launcher just click your interface. It opens immediately. You're right though, he did skip over that.
DONT PURCHASE ALLERT! This brand's hardware relies heavily on firmware updates, which can lead to potential compatibility issues down the line. Additionally, when they release newer interfaces, older models might not receive full support, potentially pushing you towards an upgrade.
In my experience, resolving technical issues with their customer service took over two weeks, and the solutions offered weren't entirely satisfactory. This has led me to recommend exploring other brands to avoid similar frustrations.
あれっ!?位相…反転してね?????????????????