let's make some .177cal slugs with the gmi slug diy. review and how to use.
HTML-код
- Опубликовано: 10 мар 2022
- The gmi slug diys are discontinued for now. The video is a how to and NOT for sale buy me. please don't ask for pricing or where to buy.
Спорт
Very cool and THANK you for the video👍
Looks like a much improved version of the "Weebly Nomad" pellet maker that was made ~10 years back. The one thing that was nice was it came with a 5 gang mould to cast cores so you didn't have to buy lead wire. This one is much heavier duty and appears to be better machined as well.
Thanks for the awesome information.Great video
Thanks
I just received my GMI swager and it's awesome.
Very informative 👍👍👍👍👍👍👍👍
Thanks mitch
Perfectos tus slugs, felicitaciones!
Luego voy a hacer un video con los slugs calibre. 30 que estoy haciendo por vaciado y con molde NOE de 56 grains. Aun falta perfeccionar la aleacion pero ya estoy agrupando en 20 mm a 50 metros con el Impact MK2
This is dope. Been thinking about getting a press and some dies.... but just dropped a sh!t ton of loot on a 2nd Maverick setup (.30), new G19, and a thermal scope. Thanks for the info here, king.
Thanks
Very nice job
But could you please tell me how calculated the (0.30 $ to 22.99 ) the price 0.30 is for how many pellets?
Thank you very much for time
Very interesting 👍 I was thinking it had to be hot led like in a liquid form lol you should start a business from this I'd buy some deffo 👍
Thanks for watching
Thanks for sharing 👍
Outstanding!💥👏👏👏👍👍👍👍👍
I have found that a dish or cup base could end up leaving your slug half way across the transfer port as the cocking pin has further to travel before it makes contact with the base of the slug.
With a flat base slug the slug is pushed further into the barrel past the transfer port allowing a clear passage for the air to propel the slug from the barrel.
I haven't had that problem
@@airgunsofidaho4886 did you measure the furthest point of the transfer port then measure the depth of how fat the slug was pushed into the barrel,
If so how did you measure it please.
@@PeakyBlinder load a pellet or slug in the air gun and then remove the barrel. And then just check how far the pellet or slug and see how far it when it the barrel. That's the best way to do it
@@airgunsofidaho4886 thanks,
I did this and the slug that was concaved sat very close to the transfer.
So now I'm looking into the difference between concaved and flat slugs.
Awesome video. What is pricing on the die’s? And what size wire for .177?
Good vid. I’m very interested in your new press set up. Can you please list what you have? I want to make some .22 slugs. Thanks.
🦗🦗🦗 It doesn't matter what I have since the company isn't even making diys anymore. You guys make it. Like I have to share everything with you guys. Why would I share things with one time viewers. You guys don't even subscribe and like the videos. Don't expect to get everything you want if you don't even help out the channel 💯
Guud video 👍🏻
Thanks
Get the GMI freedom press they are spot on.
How would you use your recovered pellet lead in this process?
Where do you get your lead core?
Hello sir nice video but how to order this molding? for personal use. from PHIL.
Hey man, thanks for the video. What is the head size you are using for the .177 slugs?
I don't know what the o give is on the slugs. Maybe 3/4
for the mini swage how much did it cost and if you dont mind could you send a link to the website you got it from or where you can get them from thanks
The website is called. Gmiestore
Quando é essa forma 5.5 e 635 é 9.mmm resposta em português por favor
Where do u buy the die and cords
do you send it to Brazil..how much does it cost
Enough interest in dies I'll start making them.
If you do start making them. Let me know I need .177 .25cal and .30cal
I wished I could make some myself but it is not too cheap even the "cheap way" 😁
Hey. Airgunning isn't cheap.
@@airgunsofidaho4886 it is until you end up with 15 cheap airguns 😁
Can you share the dimensions? I can easily make this on my cnc machine
What do you prefer? Melting the lead (casting) or use this press method?
I prefer using the press. Since I can use different hollow points and different bases on the slugs. I not have very much experience casting so my slugs are not very good from the molds.
Very interesting! Where can you buy the kit to make the slugs? Thank´s
GMI engineering,
The quality is outstanding.
A donde puedo comprar uno
value of this tool lead slug mold
no product available on GMI website
Very nice and informative want to contact you i want that diy for .22 slugs
If your in the USA. I have some .22 cal dies I don't use anymore. Let me know if your interested.
Good job bro,I see why your breaking your presses! You don't need that much force on them,it's lead not steal its soft,your press should last forever!
Thanks for watching
Ya I'm going to get into it,thanks for sharing how to do it,I was wondering how it was done.
I've got the same swaging only in 25 Cal and I've got a 1 ton arbor press haven't broke mine yet probably made at least 15,000 slugs
I even use a longer cheater bar on it
@@danieldyck2576 Ya that's cool just take it easy 😂!
Hello. Im from Argentina. How can i buy that kind of dies or mold? Calibre 6.35 Thanks
Did you sell it?
How to avail for 22 and 177
من فضلك كيف يمكنني صنع مادة سلك الرصاص.. لايتوفر في بلدي؟
👍
Hi, where did you buy your GMI diy form
from Indonesia I follow, and greetings to friends 🙏🙏🤝🤝❤️❤️
Thanks for following
We're i buying this Tool?
How much cost the slug dice/mold. For 22cal..
Same price as the. 177 diy
How much sir...
450 -600 dollars
Brp harga cetakan peluru slug om..?🙏🙏🙏
Diluar negri mahal dan rumit prosedur pembeliannya.belum lagi pajak bea masuk.
Buatan lokal juga bagus aku punya 2 model jsb n nsa 13 gr
Passa as medidas
Indonesia
you lost me at the lead cords ?
you should never cut towards you one slip and a finger is gone
I think the die is over priced.. well if you order it in a shop who has only manual lathe machine that price may fair but if the shop has CNC and they realy made it for mass produce that price is super high
I don't think it's overpriced for a Corbin or the the new GMI freedom dies they're all around twice the price of these
How much is the material worth? Well its almost insignificant, what makes it expensive is the making process or how they making is done. In a small shop that is first-time working on it it may take 2 hours but with the proper toolings, you dont even need CNC even conventional machines they can make one every 10 minutes.
Unfortunately GMI is out of business.