I still have to old files like before the rods for the control arms was turned around and to see the big difference in terms of printability and overall just the improvements is great to look at
It came out great, I was also looking for more heat-resistant filament at the time. My projekt right now gets a main frame full out of wood. I thought let's try something else then always metal and plastic. Great build so far!
@@audonhouse2442 that’s a pretty good idea. I think I’m gonna use that in mine. If not aluminum cans maybe I might just 3-D print some to avoid water getting kicked up inside.
Those CF filaments have some safety risks and I wouldn't touch them with bare hands if not properly coated. There's a nice video from Nathan and his microscope.
@@SuperYASSERARAFAT he covered that like two videos ago but it was mid engine I am doing a front engine set up and it is a lot more tedious and then you’re also to have to forgo the realism of putting a fake engine inside the engine bay
Привет я из России мне нравится твой проект буду его повторять со своими доработками и идеями к сожалению уменя нет возможности купить реальные тормоза и двигатель двс ,но я буду делать все иначе ,но все же в файле проекта не нашел не стабилизаторов не простовок для дисков которые были в виде тормозов для видео ,также планируешь ли реализовать фары во всех функция у меня была мысль сделать что когда включаешь поворотник на машине повернул и выпрямил колеса он автоматически выключается реализовать думаю через углы сервопривода пока работаю,твоему проекту желаю только удачи надеюсь получить ответ
Awesome 👌 project
Thank you!
Brilliant work 👌👌
Thanks a lot
this is gold!
Thanks
I still have to old files like before the rods for the control arms was turned around and to see the big difference in terms of printability and overall just the improvements is great to look at
Great job ! I wish to print it someday. Keep going.
You should!
Great project. You have come far with those printed models. 👍
Thank you very much!
Great video.
Thanks!
It came out great, I was also looking for more heat-resistant filament at the time. My projekt right now gets a main frame full out of wood. I thought let's try something else then always metal and plastic. Great build so far!
Awesome build! Keep it up!
Thanks, will do!
you should make you the fenders form aluminum soda cans
@@audonhouse2442 that’s a pretty good idea. I think I’m gonna use that in mine. If not aluminum cans maybe I might just 3-D print some to avoid water getting kicked up inside.
Those CF filaments have some safety risks and I wouldn't touch them with bare hands if not properly coated. There's a nice video from Nathan and his microscope.
I will check it out
That only applies to raw filament ends.
@@wutangclams9936unfortunately not the case, check for yourself
Hansome 😊
yes yes yes !!
Be careful when driving this car
But why😊, he always push it
Hey man i dont know if you noticed but at 2:42 you leaked your postal code, you should sensor private information in my opinion.
Beautiful model btw
Thanks man, appreciate that, I moved from there, so I'm not og there if anyone comes over there 😅
Add turbo
Least if crash now you can just replace sections instead of whole car. Lol
Brushless front engine set up?
@@SuperYASSERARAFAT he covered that like two videos ago but it was mid engine I am doing a front engine set up and it is a lot more tedious and then you’re also to have to forgo the realism of putting a fake engine inside the engine bay
Did you go to Penn High school Mishawaka? I noticed the shirt.
Not really, just a tshirt 😅
@@scaleaddiction we were the penn kingsmen. I saw a kingsman and wondered.
Can i also fit a 4 cilinder nitro engine in this car?
I will be putting 4 cylinder engine, it will need some work for sure
Привет я из России мне нравится твой проект буду его повторять со своими доработками и идеями к сожалению уменя нет возможности купить реальные тормоза и двигатель двс ,но я буду делать все иначе ,но все же в файле проекта не нашел не стабилизаторов не простовок для дисков которые были в виде тормозов для видео ,также планируешь ли реализовать фары во всех функция у меня была мысль сделать что когда включаешь поворотник на машине повернул и выпрямил колеса он автоматически выключается реализовать думаю через углы сервопривода пока работаю,твоему проекту желаю только удачи надеюсь получить ответ
Or can I buy it
cults3d.com/en/3d-model/game/8th-scale-supra-with-2-cylinder-engine-project
Can you send me this file
Here
cults3d.com/en/3d-model/game/8th-scale-supra-with-2-cylinder-engine-project
You crashed it?
Yes, here
ruclips.net/video/G6EHzqAD9ao/видео.html
SECOND
🙏
THIRT
🙏
it would be better to put an automatic transmission
I really enjoy changing it my self