2024 Prius Prime | Beat-Sonic Amplifier Installation

Поделиться
HTML-код
  • Опубликовано: 23 дек 2024

Комментарии • 17

  • @Le_Phish
    @Le_Phish 26 дней назад

    this looks great! do the RCA connections function, possibly for subwoofer signal? thanks!

    • @BeatSonicUS
      @BeatSonicUS  26 дней назад

      The one in the video is our ENA-2T3 which has RCA inputs. Our brand new ENA-3T3 has RCA sub outputs for a subwoofer. Here's the link www.beatsonicusa.com/products/beat-sonic-ena-3t3-plug-and-play-encore-alpha-power-amplifier-kit-for-select-2018-toyota-models?variant=44746144448663

  • @HumbleBearcat
    @HumbleBearcat Месяц назад

    Very intriguing product. I have a 2024 Prius LE (base model), from your website I see that your amp has 4 channels, but my car comes with 6 speakers. Does that mean the dash speakers are using the factory amp or are the dash speakers + front door speakers are using the same channel?

    • @BeatSonicUS
      @BeatSonicUS  Месяц назад

      Two of the same speakers are wired on the same channels

    • @CALiiGedd0n
      @CALiiGedd0n 11 дней назад

      @@BeatSonicUS Would this be a normal configuration for this generation prius or is this something that was done with this amp?

  • @gulfstorm99
    @gulfstorm99 Месяц назад

    I installed Rockford fosgate speakers into my non JBL system. Would I notice improvement in having 6 aftermarket 3 way speakers? Is there a way to adjust treble on this amp? Would in vehicle bass/mid/treble adjustments still work?

    • @BeatSonicUS
      @BeatSonicUS  Месяц назад +1

      In-vehicle factory equalizer adjustments will work and will be the way for adjustments. 4~8 ohm aftermarket speakers will also be compatible.

  • @duoshorn
    @duoshorn 9 месяцев назад

    Nice to know how to add this amp, but there is no info as to the original amp/output/distortion vs. the replacement to know if you are even gaining anything at all.

  • @deanchristensen8363
    @deanchristensen8363 Месяц назад

    You mentioned 50% is best for the JBL system. What's the best setting for the non-JBL system? Thank you in advance.

    • @BeatSonicUS
      @BeatSonicUS  Месяц назад +1

      Try having it at 60% or at the 1 o'clock position.

    • @deanchristensen8363
      @deanchristensen8363 Месяц назад

      @@BeatSonicUS Thank you. I plan to purchase the amp in next few weeks.

    • @BeatSonicUS
      @BeatSonicUS  Месяц назад +1

      @@deanchristensen8363 Thank you for your support! We hope you love the amp!

  • @leonidaswilliams6280
    @leonidaswilliams6280 8 месяцев назад

    What’s the setting suggestion for the non-jbl Prius trims? Being that you set it to 50% for the jbl one.
    Also, if I currently have the non jbl Prius but I later trade in for a jbl trim…will it still be compatible? is it just a harness change or a whole hardware purchase that would be necessary?

    • @BeatSonicUS
      @BeatSonicUS  8 месяцев назад +1

      Start at 50 percent, and increase the volume to the loudest listening level. Then adjust the front and rear gain and ensure there are no distortion or cracking in speakers. Yes the same kit is compatible with non JBL and JBL models. Both the harness and the amplifier are exactly the same

  • @isaacsmind5575
    @isaacsmind5575 8 месяцев назад

    will this work with the non-jbl, standard 8-inch display?

    • @BeatSonicUS
      @BeatSonicUS  8 месяцев назад +1

      Yes this is also compatible with the non JBL standard 8 inch screens as well. Installation process is exactly the same