It’s a toutorial. Slow it down not trying to pause every second. Also show the dimensions rather than reading them off at light speed. Just a few tips. Especially for new players.
Your center of gravity is likely behind your center of pressure. When taking off, make sure your shuttle engines are tilted outwards to push the back end in while the SRBs are firing. Maintain your launch angle by adjusting the throttle of your shuttle engines. Less throttle will make you rotate backwards, more throttle will make you rotate forwards.
the last 24 hours I've spent building one and EVERY TIME THE SHUTTLE BREAKS FROM THE BOOSTER IN FLIGHT WHEN I RESPAWN INTO THE VAB THE SHUTTLE IS HALFWAY OR ALL THE WAY UNDER GROUND WITH NO WAY OF RECOVERY. ..
That flap below the engines was absolutely critical for entry because the nose of the craft had a lot more drag during entry and the nose was getting lifted up due to this.(sorta it's complex hypersonic stuff) The purpose of the flap was to keep that nose down and sorta control and tame that a bit. Interesting poorly remembered history fact!
Which part did you use for the wing streak? It looks like you chose the MPS-500 "Transition" but when I play with the values it looks nothing like your end product
I've read the control surfaces were locked on the actual orbiter vehicle on launch... is this feasible in KSP or is it an absolute necessary in KSP to hold course to orbit with wonky stability issues in the game???
impossible to put it into orbit. By the time both boosters are ejected, the shuttle is almost out of control. After 11 attempts, I was only able to take it to 35,000 meters altitude. The other times I had to separate the tank from the shuttle in an emergency to be able to land it. It is beautiful but unusable
I made almost an exact copy of this Shuttle with my own modifications but the way you do the color is by messing with the base color opacity. I'd have to check my paint options again but setting the accent color to 0% opacity and then on the base color setting it to like 10% opacity on black works. Might have which is base and accent flipped but you get the idea
Idk what is happening but constantly when im landing the shuttle, it keeps flipping over, i followed your instructions and also did not change the wings or anything, but it keeps doing the same thing, any solutions for this?
Mess around a lot with the wing position and add monoprop tanks to the front of the cargo bay. Turn on the indicators for Center of Lift/Pressure and Center of Mass. You want Center of Lift/Pressure just behind the center of mass. Too far back and you'll flip, too close and you'll flip
i looooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooove space i need that game is it calld ksp
i put your video on .5 speed and still found you rushed through building it. it was very hard to follow and i ended giving up. a lot of stuff was just quickly put on and had no explanation as to how you were doing it.
Yeah I was also excited because I'm not skilled enough to build these on my own when I found a tutorial and I also gave up due to the rushed feel. Especially when it came to the wing measurements.
@@willw7662 I’ve followed the tutorial to the best of my ability. check my channels bio for the craft download link if you’d rather not build it or would like to just look at it as a reference.
@@delfinenteddyson9865 Seems the t/w ratio is way off in the OAB also. Shows it as 0.58 but I can take off with it. But I guess thats one of many bugs with early release.
I’m sorry but this isn’t a tutorial you talk way to fast and you talk bout things while doing other parts to the ship while not explaining what you’re doing I couldn’t follow along after the first 5 mins
There is a difference between making THE space shuttle and making A space shuttle. Matt Lowne and other streamers make space shuttles that function, they are not trying to replicate THE space shuttle.
I also want to know this, no idea how he opened that window to adjust the size of the wings. One thing I honestly dislike about watching KSP RUclipsrs, they assume you know how to do everything already.
@@billygrego4769 if you still can’t figure it out, I’ve followed the tutorial to the best of my ability. feel free to check my channels bio for the craft download link if you’d rather not build it or would like to just look at it as a reference.
I like that they included the space shuttle possibility in KSP 2. It took some time in KSP 1 to get the orange tank and the big boosters.
It’s a toutorial. Slow it down not trying to pause every second. Also show the dimensions rather than reading them off at light speed. Just a few tips. Especially for new players.
the engine mount only has 1 node for me, its supposed to have 4. one in the center, i only get the one in the center
nice, every time i make a shuttle it either cant get to orbit or it flips backwards during landing
Your center of gravity is likely behind your center of pressure. When taking off, make sure your shuttle engines are tilted outwards to push the back end in while the SRBs are firing. Maintain your launch angle by adjusting the throttle of your shuttle engines. Less throttle will make you rotate backwards, more throttle will make you rotate forwards.
i like how everything in ksp 2 looks very metallic and colorful
How do you get 3 nodes on the EM-500 "Hotplate" engine mount? I only have one in the center.
me to
click on 3 symetical and then put it on the cornder than scenter it
My engine plate only has one snap point, why?
I want to attach the fuel tank to the separator, but it is either attached askew or not attached at all. what to do urgently
Anyone know how he gets the different paint scheme on his wings? Mine is different
i built the entire thing but i can only take one half the orange thing or the shuttle how do i fix
For some reason my my engine plate doesn't allow for engines to be attached
I can’t get anything to stick where you put it and I don’t know why
my vector thrusters have 2 tons of fual how do I fix that?
Great tutorial piolet
does anyone know.. is it possible to do fuel flow priority per tank in KSP 2? I can't find it, and i keep running out of fuel in tanks i didn't wanna
I'm having this issue too
not sure but do you have advanced tweakables enabled?
@@ianfish8792 I don't remember but i'll check when i go back to the game thanks.
I have everything down to a t but the orange boosters and everything wont attatch to the shuttle.
could you please put a link to the craft file in the description
yes
I have a problem. The ''plane'' tanks are too small and there's no fuel after like 10 seconds how can i get more?
Same here
Turn on crossfeed
I would love to make this, to bad my game is bugging, xl radial coupler will not work.
the last 24 hours I've spent building one and EVERY TIME THE SHUTTLE BREAKS FROM THE BOOSTER IN FLIGHT WHEN I RESPAWN INTO THE VAB THE SHUTTLE IS HALFWAY OR ALL THE WAY UNDER GROUND WITH NO WAY OF RECOVERY. ..
Ksp2’ s problem
Very nice
the numbers mason, what do they mean?
That flap below the engines was absolutely critical for entry because the nose of the craft had a lot more drag during entry and the nose was getting lifted up due to this.(sorta it's complex hypersonic stuff) The purpose of the flap was to keep that nose down and sorta control and tame that a bit. Interesting poorly remembered history fact!
How did you get so much fuel?
His turtorial did not show you the fuel duct added
@@DOM0979 i see the fuel duct option but im not attaching it right it still doesnt feed the shuttle.
I am very optimistic about this game
G'day m8 Matt Lowne said that he is not trying to base it off of the space shuttle just saying :D
Which part did you use for the wing streak? It looks like you chose the MPS-500 "Transition" but when I play with the values it looks nothing like your end product
I've read the control surfaces were locked on the actual orbiter vehicle on launch... is this feasible in KSP or is it an absolute necessary in KSP to hold course to orbit with wonky stability issues in the game???
impossible to put it into orbit. By the time both boosters are ejected, the shuttle is almost out of control. After 11 attempts, I was only able to take it to 35,000 meters altitude. The other times I had to separate the tank from the shuttle in an emergency to be able to land it. It is beautiful but unusable
you should copy and paste the gcode for the build in the comments or description!
How do you get the wings to look like that because i can't with the color options
I made almost an exact copy of this Shuttle with my own modifications but the way you do the color is by messing with the base color opacity. I'd have to check my paint options again but setting the accent color to 0% opacity and then on the base color setting it to like 10% opacity on black works. Might have which is base and accent flipped but you get the idea
I put an empty XL monoprop tank in the bottom of the large fuel tank, simple and looks great
can you make a realistic Buran?
Whats the color code?
Can you do a tutorial for a saturn v?
what is your steam name so i can find the craft.
Idk what is happening but constantly when im landing the shuttle, it keeps flipping over, i followed your instructions and also did not change the wings or anything, but it keeps doing the same thing, any solutions for this?
Mess around a lot with the wing position and add monoprop tanks to the front of the cargo bay. Turn on the indicators for Center of Lift/Pressure and Center of Mass. You want Center of Lift/Pressure just behind the center of mass. Too far back and you'll flip, too close and you'll flip
OK thanks man
yo how you rotate
i only see one node not 4 for the engines
Do you know how to download load KSP2??
i looooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooove space i need that game is it calld ksp
i put your video on .5 speed and still found you rushed through building it. it was very hard to follow and i ended giving up. a lot of stuff was just quickly put on and had no explanation as to how you were doing it.
Yeah I was also excited because I'm not skilled enough to build these on my own when I found a tutorial and I also gave up due to the rushed feel. Especially when it came to the wing measurements.
@@willw7662 I’ve followed the tutorial to the best of my ability. check my channels bio for the craft download link if you’d rather not build it or would like to just look at it as a reference.
love the video but, could you slow down a bit for those of us who are new?
do how to build starship
Made it to orbit, but every time I reload the wings fall off.
That's not very typical, I'd like to make that point
@@delfinenteddyson9865 Seems the t/w ratio is way off in the OAB also. Shows it as 0.58 but I can take off with it. But I guess thats one of many bugs with early release.
I try to
am i the only one who thinks this guy sounds like mort from family guy
I am the 69th person to watch this vid. Noice
came here since mine did backflips and crashed 😂😂😂😂😂😂
pleace slow down you go so fast i hade to set the playback speed to 0.25 to understand you
The fact that ksp is ded
I’m sorry but this isn’t a tutorial you talk way to fast and you talk bout things while doing other parts to the ship while not explaining what you’re doing I couldn’t follow along after the first 5 mins
THIS DOESnT EVEN WORK
please move 10x faster for the next tutorial man
Slow the video down ever think about that
Haha I'm early
There is a difference between making THE space shuttle and making A space shuttle. Matt Lowne and other streamers make space shuttles that function, they are not trying to replicate THE space shuttle.
Me who doesn't have a good enough pc to even load ksp2💀
Haha im early
how to use procedural wings?
I also want to know this, no idea how he opened that window to adjust the size of the wings. One thing I honestly dislike about watching KSP RUclipsrs, they assume you know how to do everything already.
@@billygrego4769 right click on the wings
@@EpicJake07 Tried that, doesn't say any information about procedural
@@billygrego4769 if you still can’t figure it out, I’ve followed the tutorial to the best of my ability. feel free to check my channels bio for the craft download link if you’d rather not build it or would like to just look at it as a reference.
@@billygrego4769there is a wrench 🔧 icon when you hover you mouse over the wings click the wrench 🔧
the craft wont stick on the booster by me can sobade send me craft file ?