That is our "US Navy Wagon" aka V-Wich. We have 6 sizes from 8,000 lbs to 80,000 lb containers. We also have ForkWich, TractorWich, & CaddyWich. Check us out at www.TriWich.com
Great job guys. my extra process is to weld an angle tow bar on one end and stabilize one end of tires . u can tow and direct left and right from the tires that articulate. Im about to try my on 40 yarder and a 20 yarder. in Iowa park tx. help a vet. in any way?
This is an old video. we have products that move container with forklifts, tractors, pulling like a wagon with a truck, moving fully loaded containers with an aircraft caddy in production and driving down the highway. Check out www.TriWIch.com To help you, please send me your address. I will find a distributing partner near you to help. Dan
Yes, this is the video that the US Navy and AT&T saw and contacted me. After this one, we developed forklift, tractor, truck and caddy solutions to pull conntainers. And drive down the highway with LiftWich. check out www.TriWich.com
that was proof of concept. We now spin fully loaded shipping containers on every caster material and move them with tractors, forklifts, pickup trucks and airplane caddies. Plus we made a highway dolly going 90 mph. Might was to check out www.TriWich.com
Whats something like this cost? I just got a 40’ container but it had to be dropped in the center of my little lot due to the truck not being able to maneuver properly to put it where it needed to go.
@@LordDeadSpider there are about 30 different Pneumatic solutions from 6,000 lbs to 57,800 lbs. Cost ranges from $5,000 to $$65,000. TriWich picks up every casters in the world. The product you are looking for is called HitchWich that can be used wtih tractors, forklifts pickup trucks, and trailer caddies.
I am confused which type you count wheel like front side(2 x 2 ) wheels or 2 set which is shown in thumbnail like left side 2 and right side 2 wheels ?
Doing this "Without Tractors"... Get 4 "10 Ton" High Lift Jacks, and 3 Friends to help Jack, or, two strokes, move to next Jack, two strokes, move to next, etc.
I'll bring the beer..... This was our prototype. Military contacted us after seeing this. In less than 1 year we are global because of this product. check out www.TriWich.com
We have three different solutions with Swivel Pneumatic casters today ranging from 7,000 to 58,000 lbs containers. Best to visit our web page www.TriWich.com and look for the type of solutions you are looking for and then send us an email to Info@TriWich.com or fill in the Contact Form. Thanks DBG
@@TriWich I just visited your website. Your price catalog is the most confusing publication I've ever seen published. Looks like you have a great product, but you need to hire a professional sales and marketing consultant to published an easy to read and understand product and price document.
@@DougHanchard Exactly what we are doing. We are transitioning from R&D to S&M and improving our messaging. Inventing new products seems to be easier than marketing them... lol If you have any question, phone number is 909-582-9591
@@DougHanchard Exactly what we are doing no Doug. Our customers are military and corporate America. They call and ask questions and I have 100% satisfaction. Give us a call 909-582-9591
we have three different solutions with Swivel Pneumatic casters today ranging from 7,000 to 58,000 lbs containers. Best to visit my web page www.TriWich.com and look for the type of solutions you are looking for and then send me an email to Dan@TriWich.com or fill in the Contact Form. Thanks Dan
Not sure what you mean by that. Maybe you mean breed? TriWich is already being considered the Nike of lifting by Aerospace, Space Force, Military. It is a globally known name today and we are still a start up. Thanks for the bread
@@Peligralito Oh, you are a Troll. Assuming you live in your mothers basement? No problem, I am with your parents. I hope you grow up one day. Good Luck
Isso agora é chamado de "US Army/Navy Wagon" e está começando a ser implantado em todas as bases do mundo This is now called the "US Army/Navy Wagon" and starting to deploy at every base in the world
Looks like a great idea, congratulations to your crew for the design and success!
Thank you. we have come a long way since that video. US Army, Navy, AT&T, etc. Turning into an amazing company... All my best Dan
That is fantastic to hear. Well done! @@TriWich
Install a trailer tongue on one end or both so that you can maneuver it like a trailer instead of dinging up the metal on the container pushing on it.
That is our "US Navy Wagon" aka V-Wich.
We have 6 sizes from 8,000 lbs to 80,000 lb containers. We also have ForkWich, TractorWich, & CaddyWich. Check us out at www.TriWich.com
Great job guys. my extra process is to weld an angle tow bar on one end and stabilize one end of tires . u can tow and direct left and right from the tires that articulate. Im about to try my on 40 yarder and a 20 yarder. in Iowa park tx. help a vet. in any way?
This is an old video. we have products that move container with forklifts, tractors, pulling like a wagon with a truck, moving fully loaded containers with an aircraft caddy in production and driving down the highway. Check out www.TriWIch.com To help you, please send me your address. I will find a distributing partner near you to help. Dan
Great Idea . This idea could solve MY problem of Difficult access ??🤔🤔😉
Yes, this is the video that the US Navy and AT&T saw and contacted me. After this one, we developed forklift, tractor, truck and caddy solutions to pull conntainers. And drive down the highway with LiftWich. check out www.TriWich.com
@@TriWich such an inspiration
We move containers with forklifts, tractors, trucks and caddies today. Check us out www.TriWich.com
Nice kit
whewre do I get those wheels and bracket or did you build?
www.TriWich.com see CONTAINER page
All that then its pushed with bucket to put dents and holes in it
that was proof of concept. We now spin fully loaded shipping containers on every caster material and move them with tractors, forklifts, pickup trucks and airplane caddies. Plus we made a highway dolly going 90 mph. Might was to check out www.TriWich.com
Whats something like this cost? I just got a 40’ container but it had to be dropped in the center of my little lot due to the truck not being able to maneuver properly to put it where it needed to go.
www.TriWich.com The US Army just bought 2 systems and they can move a container in 5 minutes.
@@TriWich I am happy for the US Army and their swift container moving abilities. Any input on cost?
@@LordDeadSpider there are about 30 different Pneumatic solutions from 6,000 lbs to 57,800 lbs. Cost ranges from $5,000 to $$65,000. TriWich picks up every casters in the world. The product you are looking for is called HitchWich that can be used wtih tractors, forklifts pickup trucks, and trailer caddies.
Hello man can you deliver this wheels as international countries like ..🇮🇳🇮🇳🇮🇳INDIA..
Yes, we can ship international. FOB California
I am confused which type you count wheel like front side(2 x 2 ) wheels or 2 set which is shown in thumbnail like left side 2 and right side 2 wheels ?
Doing this "Without Tractors"... Get 4 "10 Ton" High Lift Jacks, and 3 Friends to help Jack, or, two strokes, move to next Jack, two strokes, move to next, etc.
I'll bring the beer..... This was our prototype. Military contacted us after seeing this. In less than 1 year we are global because of this product. check out www.TriWich.com
What’s the price of four dollies please?
We have three different solutions with Swivel Pneumatic casters today ranging from 7,000 to 58,000 lbs containers. Best to visit our web page www.TriWich.com and look for the type of solutions you are looking for and then send us an email to Info@TriWich.com or fill in the Contact Form. Thanks DBG
@@TriWich I just visited your website. Your price catalog is the most confusing publication I've ever seen published.
Looks like you have a great product, but you need to hire a professional sales and marketing consultant to published an easy to read and understand product and price document.
@@DougHanchard Exactly what we are doing. We are transitioning from R&D to S&M and improving our messaging. Inventing new products seems to be easier than marketing them... lol
If you have any question, phone number is 909-582-9591
@@DougHanchard Exactly what we are doing no Doug. Our customers are military and corporate America. They call and ask questions and I have 100% satisfaction. Give us a call 909-582-9591
How much ?
we have three different solutions with Swivel Pneumatic casters today ranging from 7,000 to 58,000 lbs containers. Best to visit my web page www.TriWich.com and look for the type of solutions you are looking for and then send me an email to Dan@TriWich.com or fill in the Contact Form. Thanks Dan
triwich is a bread
Not sure what you mean by that. Maybe you mean breed? TriWich is already being considered the Nike of lifting by Aerospace, Space Force, Military. It is a globally known name today and we are still a start up. Thanks for the bread
@@TriWich I mean the 3-bread sandwich
@@Peligralito Oh, you are a Troll. Assuming you live in your mothers basement? No problem, I am with your parents. I hope you grow up one day. Good Luck
Uma afronta por falta de moradia .
Isso agora é chamado de "US Army/Navy Wagon" e está começando a ser implantado em todas as bases do mundo
This is now called the "US Army/Navy Wagon" and starting to deploy at every base in the world