Speed Queen 30lb Stack Dryer Blower Motor Repair! | Laundromat!$! | Following Keenan !
HTML-код
- Опубликовано: 6 окт 2020
- Laundromat repair on Speed Queen 30lb stack dryer blower motor. This motor is vibrating really bad and needs fixed. This can lead to other problems if not fixed in a timely manor.
If your still are trying to figure out what Following Keenan ! is? Well my RUclips channel is a combination of my money investment. How I run my passive investments and behind the scenes of what crazy thing happen. Some just typical days in life of laundromat stuff as well. Repairing machines, buying equipment, dealing with customers and buying more property. If you want to see what I've learned over the years in my life. Want to be entertained like MrBeast and other free laundromat, reality shows. Or need a good laugh. Then hit the subscribe button sit back and get a cold drink show about to start!!! I just love making fun and different RUclips Videos!!!!
I wear a Gopro chest camera for a lot of my footage. I shoot the rest with a Canon M50. Nothing fancy just good one on one contact with people, day in the life type content. I will also add advice of thing to do when owning a business. Mostly based off what I have learned doing it.
#dryerrepairdiy
#speedqueen30lbstackdryer
#laundromatrepairs 
Авто/Мото
This guy is the real deal. Thank you for uploading this. I'm ashamed I have not done this after replacing over 10 speed queen blower fans and blower motors since 2015 when I purchased my mat. Thank you. Need to be careful with the fly switch on these. Very delicate.
I just had to change a fan in one of my HTT30 dryers. When you started the dryer, it would vibrate and rattle very badly, I thought the whole fan came apart. Instead, it was only missing one blade, the fan was otherwise intact. I had cleaned the fans a few months ago, little to no wax / lint on the blades.
Another great one Keenan keep up the good work bro!!
Another good video ,thx for showing, never thought of those dryer towel causing problems,stay safe
Keep pumping them video out thank for showing us how and where thing go and what to look for in a dry noise stuff .
I fix my own vending machines.....first i call tech support......those techies are super smart!
Great video!!!
excellent, thank you!
Great work...once again!!
Thanks!
Loud dryers seem normal at my nearby laundry mat.🤷♂️
thanks for that!
Good morning Keenan!☺️
You make it look easy.
nice but in moving all the wires you pulled the greenfield as we call it out of the relief fitting at the motor and did not put it back in properly.
i would say if i was working for you this is not right and fix it properly:)
Thanks for your video. Which fan is better, the aluminum or the plastic one?
Glad to see the wiring info, could you add disconnect plugs for it all ? So everything is a plug and go.
That's a genius idea!
Discount... plugs?
@@KOTYAR0 sry disconnect
Question if I use liquid fabric softener in the washer, does it still cause buildup in the dryer or is it just dryer sheets that do that?
You did it the hard way
Hi Keenan, I've got 5 old Speed Queen commercial dryers in my Launderette. Sometimes the dryers start but half way through a cycle will not reignite and just stays cold. Have you had this problem ?
Thanks, Rich (UK)
Hey!! I have same dryer and blower fan keeps running without minutes. What should i do? Please!!!
Just saw your video, I have the same stack dryers, had the bearing freeze and torn the shaft off the drum, do you have a video, and or where I can get a break down of the parts in gonna need for this repair?
Thank you in advance
Denny
So the actually shaft of the drum is bad? if so I can do a video on that not that hard to do. Hardest part is putting the belt back on. Ill get a video up this weekend!!
WOW, thank you for your reply! Never done this repair before, where is a good, reasonable place to get the parts? I am assuming I have to replace the part that attaches the shaft to the drum! Haven’t gotten it apart yet! Also do you recommend buying the tool for releasing the tensioner?
Thank you,
Denny
I dont use any tools for taking tension off the belt. You might have to buy a used drum. Ebay is where I would start. Search for it and see what you find.
@@FollowingKeenan ok thank you
@FollowingKeenan I have the same dryer std32dg and am a new owner/operator I was wondering if you knew how to repair this model when it won’t heat up as hot as it should, or could direct me somewhere with more info
Need a little more info. Is it heating up but turning on and off a lot? Compared to a good running dryer next too it?
I like the video but you didn't show the repair step by step and exactly how to hook things up.
My speed queen stacked dryer won't stop spinning. Do you know what could be wrong with it?
It only stops if I pull out the motor wire from the back.
I would think the ice cub relay is bad. If it the model that has an ice cube relay.
Hey Man...I have a dryer blower motor that won't start. Have you ever had one go bad? Capacitor?
Yea, capacitor is 1st thing to check. Capacitors have a spot next to the two blade terminals. If poped out it bad.
Other thing it could be is a relay. On speed queen and huebsch older dryers have ice cube relays. They wear out and do the same. If you have that type i would switch blower with dryer drum terminal and see if it starts.
In 13 years of this i have yet to have the winding in a dryer motor go bad. Bearing ive had them go out. They still run just really noisy.
Hope that helped!
I don’t have any problem to people explain all this to help but we need to say all this have a cost too and nothing is free many ones want think is fast and they don’t do and want chip or free😒
I've got one lower pocket that consistency gets 'won't dry' complaints. I've changed the blower, thermister, cabinet overtemp, & ignitor. It seems to operate normally, but it won't dry in the same time frame and the one next to it. I've even looked at the exhaust pathway, but found no obstruction. Anyone have any ideas?
What's the flame when running look like, real blue or orange and yellow? Have you actually vended it and watch it run compared to above unit at the same time. Both units should flame on and off at about same time. Etc... That a another way to see what's going on. Using the good unit as an example of what should be happening.
@@FollowingKeenan Professional answer
how much for a new blower motor or was that a refurbished?
New, they run 240. I bet this was a old used one I saved.
From where do you order thr shocks? Please can you give me the web site thank you
Ebay, have a bunch of listings.
Great bit of info, anyone dealing with the general public needs a medal and should be allowed to shoot 3 a year just for the fun of it !
What does that 30lb cost new
Stack? About $6-7K
I paid $4500 for the stainless steel 45lb stacks. But that was about 3 years ago.
www.tumblefreshlaundry.com/ Keenan check this laundromat out in Minnesota. There are some ideas for ya.