I have a question. My daughter is just beginning this work and I'd like to know if when using the welder, your skin touches the earthed crocodile clip, would you be electrically shocked?
Nicole great question,. Let's take it further, surgery, scheduled or emergency. Allergy reactions. Putting on weight, should I stop? Really bad idea all around. I hope they do not perform this procedure on anyone who has a pacemaker, the arch pulses will damage the pacemaker.
These all, except for the pacemaker, can be solved with a simple pair of scissors ✂️! The metal is thin enough to be cut at the jump ring, then can be welded back at a later date
From what I've read, it works fine without, you just get a cleaner effect when the gas is added. With that in mind I'd add the gas since you want perfection. Especially when it comes to jewelry.
If you cut it right where the jump ring is (with scissors or nail clippers), it’ll protect the integrity of the chain and it can easily be rewelded. Most business owners offer free re welding if this is the situation!
Even welded/soldered jewelry with the clasp will break at the jump ring. This gives it that seamless look and also it’s just the thought of something “permanent”. Of course can give them options.
@@Austin1990 not sure and would depend on how this of a jump ring. I work at a jewelry store and all the jump rings are welded. When we take in broken chains it’s almost always at the rings or the chain itself. Almost never the clasp itself.
the weld once finshed is just a strong as every other welded ring if there is a semi shut ring it would give first as like you said. the welded ring that was done by laser welder will not "give before any other ring in the chain. once is welded correctly it is just as strong they are all equal
I've been spot welding chains for a while now as a bench jeweler and gold filled has never been an issue. Gold plated will ruin the plate though. The gold filled layer is decently thicker
I appreciate the videos, but I think you might go back and adjust your pay-off number, if all it takes is 12 bracelets to pay of a $2,500 machine, that would be averaging $208 a bracelet. Your 2,500 also did not include gas and regulators. Just don't want people to jump in and get overwhelmed.
Our jewelry store has 2 spot welders, 1 with argon and 1 without. Sure the argon helps create a gaseous shield, but it's not entirely required. As long as you have something like a fiberglass pencil to scratch the surface clean, it's fine. The gas is used to prevent porosity within the weld, and at this size of welds, I would not be concerned with it. I also have a master welders degree for background knowledge.
AmazonJackery Portable Power Station Explorer 240, 240Wh Backup Lithium Battery, 110V/200W Pure Sine Wave AC Outlet, Solar Generator (Solar Panel Not Included) for Outdoors Camping Travel Hunting Emergency
@@sierrawhitney1524 wasn't trying to be mean, just making an observation about the unanswered questions in the comments. Questions about purchasing products were being answered but questions concerning, what happens if I need to take this off and can't, wasn't being answered. I don't think that is unreasonable to point out, and this being a product review by Stuller, wouldn't it make more sense for Stuller to answer these concerns. Like I said, I wasn't trying to mean. Just making an observation.
Sierra. My husband has to take his chains, belt buckle, vest with metal snaps, and his steel toed boots off before going through the machine. I don't think it picks up solid gold, but it will pick up a combination of alloys.
What sort of liability insurance would I need to carry to do this? Thanks
I have a question. My daughter is just beginning this work and I'd like to know if when using the welder, your skin touches the earthed crocodile clip, would you be electrically shocked?
Nicole great question,. Let's take it further, surgery, scheduled or emergency. Allergy reactions. Putting on weight, should I stop? Really bad idea all around. I hope they do not perform this procedure on anyone who has a pacemaker, the arch pulses will damage the pacemaker.
These all, except for the pacemaker, can be solved with a simple pair of scissors ✂️! The metal is thin enough to be cut at the jump ring, then can be welded back at a later date
Do you have to use gas with the orion mpulse? Or does the machine work without gas?
Its an arch welder it runs on electricity, its a table top model thats designed for small projects.
From what I've read, it works fine without, you just get a cleaner effect when the gas is added. With that in mind I'd add the gas since you want perfection. Especially when it comes to jewelry.
any issues with that jewelry and TSA??
What happens when the doc tells you to take it off for x-rays etc? You just have to break it?
you pretty much have to cut it.
If you cut it right where the jump ring is (with scissors or nail clippers), it’ll protect the integrity of the chain and it can easily be rewelded. Most business owners offer free re welding if this is the situation!
How does this jewelry work going through medal detectors or have an MRI or something like that
You have to take them off 😢
Sucks that they don’t deliver to me in Hawaii! 😢
Why? Just use a single, open jump ring so that it is semi-permanent. That way, you also designate a failure point in case it snags on something,
Even welded/soldered jewelry with the clasp will break at the jump ring. This gives it that seamless look and also it’s just the thought of something “permanent”. Of course can give them options.
@@Anne1000. The other rings would not bend before the welded jump ring breaks?
@@Austin1990 not sure and would depend on how this of a jump ring. I work at a jewelry store and all the jump rings are welded. When we take in broken chains it’s almost always at the rings or the chain itself. Almost never the clasp itself.
the weld once finshed is just a strong as every other welded ring if there is a semi shut ring it would give first as like you said. the welded ring that was done by laser welder will not "give before any other ring in the chain. once is welded correctly it is just as strong they are all equal
The chain has a breakpoint of 12lbs which isnt much. It has a failure point already
Great video! Thank you for sharing your expertise! 💜💜💜
Do i need to buy a special welder? I see welders from 200€ and for “jewelry” is cost 2000€ at least.
Can this be done with gold filled jump rings and chain or only on solid gold?
I've been spot welding chains for a while now as a bench jeweler and gold filled has never been an issue. Gold plated will ruin the plate though. The gold filled layer is decently thicker
You should create a Permanent Chain Display solution. What is the part number to that display you're using for the chains?
whar prise this item?
I appreciate the videos, but I think you might go back and adjust your pay-off number, if all it takes is 12 bracelets to pay of a $2,500 machine, that would be averaging $208 a bracelet. Your 2,500 also did not include gas and regulators. Just don't want people to jump in and get overwhelmed.
Our jewelry store has 2 spot welders, 1 with argon and 1 without. Sure the argon helps create a gaseous shield, but it's not entirely required. As long as you have something like a fiberglass pencil to scratch the surface clean, it's fine. The gas is used to prevent porosity within the weld, and at this size of welds, I would not be concerned with it. I also have a master welders degree for background knowledge.
Do you need the argon gas when you use the mpulse?
Its an arch welder, its electric. Its not argon gas, it is acetylene and oxygen thats used in welding large heavy metals like steel and iron.
It makes the welding a little easier. A little less oxidation.
is it good for gold boiling?
How much does this machine cost?
Do you have representative I could speak with over the phone? I have a few questions!
Me and my wife gone get matching permanent buss down rollies
If we don’t have a power source, do you know or have any idea what size generator we would need to run the pulse arc?
Most portable generators generate 110 and 230 electric.
AmazonJackery Portable Power Station Explorer 240, 240Wh Backup Lithium Battery, 110V/200W Pure Sine Wave AC Outlet, Solar Generator (Solar Panel Not Included) for Outdoors Camping Travel Hunting Emergency
Available in india?
Noticed that there are no replies to questions pertaining to medical x-rays and TSA.
TSA doesn’t ask you to take off jewelry like that so that’s kind of obvious. Also a quick google search will also give you the answers. 🤷🏻♀️
@@sierrawhitney1524 wasn't trying to be mean, just making an observation about the unanswered questions in the comments. Questions about purchasing products were being answered but questions concerning, what happens if I need to take this off and can't, wasn't being answered. I don't think that is unreasonable to point out, and this being a product review by Stuller, wouldn't it make more sense for Stuller to answer these concerns. Like I said, I wasn't trying to mean. Just making an observation.
I’ve never had to remove jewelry for TSA. Unless it’s some sort of MRI, just tell them it cannot be removed (like a tight wedding band).
Sierra. My husband has to take his chains, belt buckle, vest with metal snaps, and his steel toed boots off before going through the machine. I don't think it picks up solid gold, but it will pick up a combination of alloys.
Hi, how can i order this tools?
Stuller.com/PermanentJewelry
work on audio quality too plz
We have it fixed for next time! Thanks!
I can hear
I caught the bracelet on some metal in the garage, it broke
Lol I knew it
Until you get arrested and they take you to police station..they will cut it off
I dont know why people like this
I don’t know why people don’t like this
Where do I get the grounded pliers?
Sucks that they don’t deliver to me in Hawaii! 😢
They don’t?? What island are you on?