Mr talented Reid Showing you guys how to open a air bad pump using simple methods am using a star point screwdriver and a flat point screwdriver power up motor
Mr talented aside for bed what other useful of using this air pump?coz my bed is broken have a little hole,the I cut the bed coz it's not useful but the air pump is good condition
Maybe the motor has stopped working And you might have to buy a whole new mattress with Built-in pump and if you look somewhere on the motor, it might say it molded right into whatever it’s made of
Wow I wouldn't know how to remove those plugs. Thank you Mr Talented.
Thanks for your support
Mr talented aside for bed what other useful of using this air pump?coz my bed is broken have a little hole,the I cut the bed coz it's not useful but the air pump is good condition
Trying to figure out why it stop pumping air
I have a beautyrest air.
It got sand in it from camping.
It will inflate
But wont turn off to keep the air in.
Suggestions please
Use a air to blow it out
Felicidades..de mucha ayuda el video.. como saco la bomba del colchon? Como la separo?
I cut it out
Trying to find why it is releasing air outwards only even though i am trying to fill air in the mattress. Any suggestions??
Maybe you don't shut the valve properly and it is defective
What is your objective? You just trying to see how it works or are you re-purposing the pump for something else?
Thanks for stopping by few persons asking me what the pump looks like so I just do the video
@@MrtalentedReid
10-4!
Copy
Could a hose be connected to it. to reuse as a bed pump
Yes
Do you know what causes the motor to automatically turn off once it reaches a certain PSI?
Pressure regulator switch
Hola, sabes como reparar la fuga de aire ,la válvula no retiene y se desinfla
That a good one but I can't find a repair kit for it
mine was got from a road with a puncture in it. i tried to fix it and after some usage the motor suddenly bursts out of flames.
Wow am sorry
Can i know the size of carbon brush of this motor?
Am not sure thanks for stopping by
Most important thing you didn't show..
Whats about non returne valve-membrane???
Please mine won't start...I mean when I switch it on the motor doesn't work...please help out anyway possible
Check the fuse in the coil area
Maybe the motor has stopped working And you might have to buy a whole new mattress with Built-in pump and if you look somewhere on the motor, it might say it molded right into whatever it’s made of
How did you get it off/on the airbed sir
Be more specific
What type of carbon brush is used for this intex mattress?
Am not sure
@@MrtalentedReid you open up the air mattress pump did you put it back together
Iam making drill machine with that motor
Okay sounds good 👍
Control dial don't turn. Help me, please.
Check to make sure it's not seized
Maybe the dial is broken and it cannot be fixed because those pins the tile has screws
I need the moto how order pls help me?
Looks on ebay or Amazon
@@MrtalentedReid do you know where were kind of Moto that air mattress bed uses?