Best video tutorial, thank you so much!! I just changed my front bearings after 2500 miles. Pretty easy repair! Now it should be easier next time now knowing i can remove the front wheel WITHOUT unscrewing and removing the drum brakes. Such a PITA screwing on back the drum brakes lol
Thank you, just did it. It’s so easy there isn’t really an instruction needed, but it helps you from doing more work than needed and maybe breaking something.
So the apartment fixing solution I used to do this repair: went to Lowe’s and got them to cut down a 2”x4”x8’ stud into 1’ blocks; bought a 3/4”x6” nipple pipe to take the bearing off the shaft, and I bought a bearing race and seal set (for a newbie it was worth the $20 because I was able to put one flat side down on the inner brake side bearing and then tap on that using a socket). Oh, and I used Nachi 6001-2NSE9 bearings since I couldn’t source SKF’s easily. Thank you so much for the video, it was beyond helpful. Now I just need to wait for the double lip seals to arrive and then decide if I’m comfortable enough with replacing the rear bearings 😂
Thank you very much for the helpful video! I had to change the bearings after about 840 km. Defective was only the bearing on the outside. My scooter G30D (D=Version for Germany), year of manufacture 7/2020, had no stuck brakes.
Thanks for the video! My front bearings gave out after ~70km, and I am beyond dissapointed. Too bad I already flashed the scooter so warranty is probably not an option… I guess it’s time to upgrade!
@@lolenas Yeah I've heard great things about the reliability. I had a clone scooter (which I fried) before, and comparing to it the ninebot is far superior. I think I've just got very unlucky with a splash of water penetrating the bearing seals or something. Luckily I don't mind the work of fixing it, it's just a shame to have it happen so fast.
Mine lasted about the same km as yours. I got caught under the rain twice and the bearing gave up the next days. I'm now waiting for my parts to get delivered so I can change/upgrade it.
You can al;so use the old bearings for tapping in the new ones . Also if you are struggling with the push in of the axle one, you can reverse it, put in inside the wheel one and tap on the axle to push both in at the same time
I upgraded my front bearings to hybrid ceramic. Being a complete newb, it was trickier than I hoped it would be and, yes, I ended up snapping one of the plastic clips on the fork covers :). Live and learn. Still, I'm glad I learned how to do it and it was only because of your video that I could have even attempted it. Many thanks!
@@razorray6273, are they worth it? Not sure, but the ones I chose weren't that expensive so I figured why not. So far, so good. This is what I used: www.bearingscanada.com/product-p/6001-2rs-ceramic-1228x8-abec-3.htm
@@razorray6273, no, the rear bearings are apparently 6003. I haven't yet attempted to replace those. Random Repair has also done a video on doing the rear found here: ruclips.net/video/Fw5M1_HzwG4/видео.html&ab_channel=RandomRepair
Super helpful, dude. I'm upgrading to hybrid ceramic bearings and really needed a guide to do this at home. Incidentally, could you recommend a bearing removal / insertion tool that would work? I won't argue with hammers and wood, but a dedicated tool would be welcome! Thanks and looking forward to your rear wheel bearing replacement vid.
Hello mate, good video but what about if you got 2 bearing like yours but without any axial inside... Bcs I actually can't take theym off like you did.. My scooter is a Kugoo g2 pro (if u check online) and shops asking me to much to change theym... Any idea mate..? Thanks
I have the G30 Max LE2. I take it its the same bearingwise? The factory ones are pretty weak. Mine are dead after a little over 200 km. Thanks for the video. Helps a lot!
Hey I just bought a g30 max ,5 days ago . The motor is making a little thumping sound when it switches from drive to Regen, . Also the motor has a whine to it my other one doesn't , and ideas 🤔. Thanks ,great video 👍
Great video... I just bought A Max G30LP and at 100mi (60km) are already experiencing a failure. Question: should I bother with warranty replacement since the scooter is only 2wks old? Or would you just recommend upgrading right out of the gate? Thanks!
@@randomrepair1680 Roger that! I appreciate you sharing your opinion! I'm thinking that is the direction I'll end up going. Thanks again for the video!
Thanks for the video, I bought a couple of Skf for the front, I’m gonna do this upgrade soon. Just wondering one thing, if I’ve seen properly you haven’t use any vaseline or grease for the bearings. Should I do it? Thanks
@@randomrepair1680 at the moment I’ve solved only with “Wd40 ptfe”, but only because I’m not using the G30 often (here in Italy there’s a second lockdown, kind of 😅). But the problem sometimes comes back again, so I must change che bearings.
I looked at this video a few weeks back, placed an order for bearings, and tonight i finally fixed the front wheel! Thanks for the great video! ps. When i test-rode it just now, i still had a little of that stuttering/shaky feeling, even on flat ground indoors, could it be that i need to swap motor bearings too?
Hallo, Wenn das Rad wieder mit den 17 er Schrauben befestigt werden muß eine Unterlegscheibe dazwischen oder werden die ohne Unterlegscheibe befestigt??? Beste Grüße aus Darmstadt
i wonder how much resistance the bearing have under load and 25kmh, cause mine have the same issue and after the first wet morning with no rain it started squeaking but i didnt notice any increase in battery drain but now after like 120km and a thunder storm rain ride to the store it have started to drain more cause i did get about 5-6km in Sport and it drained 15%-18% and now its drain 18-28% the exact same road to work-.-
@@nameberry220 well, when i bought it they was rock hard it felt like so havent bother checking and i feel like they are still hard when driving over bump etc but i maybe should check it out.
Are you able to provide a link of where you got the bearing from? I heard you say a place but couldn't quite make out what you said. I live in Australia so finding hard to find the SKF 6001-2RS1/C3GJN
@@randomrepair1680 Thank you. Have tried Ebay and Amazon and the prices were crazy. I found a local bearing company and will give them a call on Monday to see if they stock them. Thank you.
I have a problem, after instillation the wheel doesn’t spin as freely as on your video but spins for like 5-6 seconds and then stops. New SKF bearings. Do you know what might be the issue?
@@randomrepair1680 what if it is in rear wheel? Is that normal? As my G30D rear wheel isn’t moving freely just like the front wheel. Need your valuable advice/suggestion on this! Thank you very much for the nice & helpful video. 😊👌👌
@@randomrepair1680 oh, sorry, I was meaning generally. I have a different wheel. I searched a "bearings" web site and was amazed at the number of sizes... in thousanths.
@@randomrepair1680 so probably a good idea to buy these bearings as a spare just in case they got out of production for this scooter. Will get some in 👍🏼
@@randomrepair1680 i did and the brake drum fell off together with the axis, now how do i get that bearing inside the drum brake out of the axis? i couldnt hammer out the axis out of the drum brake, the bearing inside the drum brake actually felt quite smooth (just like in your video), so i just left it in there
@@randomrepair1680 thanks. U think i should wait if the sound comes and then change it or change it tomorrow front and rear. I checked the sound and it was gone at front wheel.
Hey really like your video, but I have a question. What are the measurements of the bearings because I can't find the right ones.(plus do you have any recommendations for upgrading those bearings?)
Can you believe it. Segway ships their units with WARRANTY VOID IF EXPOSED TO WATER. If you drive through a puddle, or in the rain, or wash it, then WARRANTY IS VOID. I'm now here to watch disassembly videos of the motor hub, which I avoided before as I didn't want to void my warranty. Only made surface maintenance, probably very ineffective, as you can't get your wd40 near anything close to the axle... I've now been chewed off on page 7 of the user handbook, in which it says that exposure to water voids your warranty. So the fact that I had a bearing ball snap in half is due to water. Sure, and I was born yesterday. I'll see what I can do to fix it, and I will never purchase another Segway product again.
Just got a 2nd hand max. I thought it was just the noise echoing through the hollow front bar.. until I spun it freely. sounds like a common problem. And omg. Had a compaq presario 970 a looooong time ago lool
@@randomrepair1680 what can I say, eagle eyed lol. Btw, is for the bearing, what's the difference between 6001-2RSH and 6001-2RSH/C3? I'm assuming both can be used?
@@a9fc Radial clearance: C1 = smaller than C2 C2 = smaller than CN Without suffix = CN normal clearance C3 = greater than CN C4 = greater than C3 C5 = greater than C4 GJN = high temperature grease, polyurea soap-mineral oil, -30 to +150°c. Get SKF 6001-2RSH for front, they should be good. 2RS1 is older contact seal.
گریس توی بلبرینگ کم است و زود خراب خواهد شد ،شما کاسه نمد داخل بلبرینگها را در آورده و تو کانال را پر گریس کنید یعنی هر بلبرین یک کاسه نمد به سمت بیرون توپی داشته باشد
Why are these scooters always so dirty in such videos, like people don’t know how to clean their scooters. I clean all of my scooters at least three times a week as I ride daily but they never get as dirty as this one.
Best video tutorial, thank you so much!! I just changed my front bearings after 2500 miles. Pretty easy repair! Now it should be easier next time now knowing i can remove the front wheel WITHOUT unscrewing and removing the drum brakes. Such a PITA screwing on back the drum brakes lol
Thank you, just did it.
It’s so easy there isn’t really an instruction needed, but it helps you from doing more work than needed and maybe breaking something.
Best bearing replacement guide i found so far. Good job. Just replaced them and everything is perfect
For every MAX G30D & MAX GD30 II users. This Video work also for this type of Series. Yesterday i fixed mine 🥳🥳🥳
So the apartment fixing solution I used to do this repair: went to Lowe’s and got them to cut down a 2”x4”x8’ stud into 1’ blocks; bought a 3/4”x6” nipple pipe to take the bearing off the shaft, and I bought a bearing race and seal set (for a newbie it was worth the $20 because I was able to put one flat side down on the inner brake side bearing and then tap on that using a socket). Oh, and I used Nachi 6001-2NSE9 bearings since I couldn’t source SKF’s easily.
Thank you so much for the video, it was beyond helpful. Now I just need to wait for the double lip seals to arrive and then decide if I’m comfortable enough with replacing the rear bearings 😂
Incredibly helpful, thank you so much! This is perfectly guided, highly informative and super easy to follow.
Replacing the bearings on my scooter was fairly easy with the help of your video, thank you very much!
It really is an alright job!
That was so much easier than i thought! Thanks for the tutorial! Im going to do this shortly with ny G65, and this really helps!
Thank you very much for the helpful video!
I had to change the bearings after about 840 km. Defective was only the bearing on the outside. My scooter G30D (D=Version for Germany), year of manufacture 7/2020, had no stuck brakes.
Thanks for the video! My front bearings gave out after ~70km, and I am beyond dissapointed. Too bad I already flashed the scooter so warranty is probably not an option… I guess it’s time to upgrade!
unlucky 😵
Mine rides like new after 1100km minimal squeak from stem fold mechanism and stem fold secure plastic ring broken
@@lolenas Yeah I've heard great things about the reliability. I had a clone scooter (which I fried) before, and comparing to it the ninebot is far superior. I think I've just got very unlucky with a splash of water penetrating the bearing seals or something. Luckily I don't mind the work of fixing it, it's just a shame to have it happen so fast.
Mine lasted about the same km as yours. I got caught under the rain twice and the bearing gave up the next days. I'm now waiting for my parts to get delivered so I can change/upgrade it.
Very helpful video. My front bearing only lasted about 370km. Very disappointed. But thanks to your video, I know can get to work :D
You can al;so use the old bearings for tapping in the new ones . Also if you are struggling with the push in of the axle one, you can reverse it, put in inside the wheel one and tap on the axle to push both in at the same time
I upgraded my front bearings to hybrid ceramic. Being a complete newb, it was trickier than I hoped it would be and, yes, I ended up snapping one of the plastic clips on the fork covers :). Live and learn. Still, I'm glad I learned how to do it and it was only because of your video that I could have even attempted it. Many thanks!
Got a link to the bearings you used? Also are ceramic hybrid worth it?
@@razorray6273, are they worth it? Not sure, but the ones I chose weren't that expensive so I figured why not. So far, so good. This is what I used: www.bearingscanada.com/product-p/6001-2rs-ceramic-1228x8-abec-3.htm
Scott Eagles thanks for this. Also, did you use the same bearing size for front and back?
@@razorray6273, no, the rear bearings are apparently 6003. I haven't yet attempted to replace those. Random Repair has also done a video on doing the rear found here: ruclips.net/video/Fw5M1_HzwG4/видео.html&ab_channel=RandomRepair
Now i have changed mine, and thanx to your video it was real easy so thank you!
You make this look so easy! I’ll probably ruin everything and the wheel will be totally off and shaking around when driving …
Will this work for the G2 Max still or has anything changed in the wheel? Mine started squeaking... oO
On the non brake side should the spacer be on the inside of the fork (bearing side) or outside the fork 15mm nut side?
Super helpful, dude. I'm upgrading to hybrid ceramic bearings and really needed a guide to do this at home. Incidentally, could you recommend a bearing removal / insertion tool that would work? I won't argue with hammers and wood, but a dedicated tool would be welcome! Thanks and looking forward to your rear wheel bearing replacement vid.
Most bearing tool kits could work, but with this setup it would be a waste. It's all so easy :)
I like to put some high end grease in those bearings, because sometimes there is not enough
Do you use (red) high temp brake grease? How to you put grease in them? I thought they were sealed?
Thank you very much !!! your tutorial helped me a lot 🙏
excelente trabajo te felicito y muchas gracias por ese gran video desde PERÚ😎🤝😎👍
Amigo al acelerar o al empujarlo el mio hace un ruido, serán los cojinetes
Im having a problem with the nuts to get the wheel off. It's so tight that i can't unscrew it. Is there any help?
Hello mate, good video but what about if you got 2 bearing like yours but without any axial inside... Bcs I actually can't take theym off like you did..
My scooter is a Kugoo g2 pro (if u check online) and shops asking me to much to change theym...
Any idea mate..?
Thanks
I have the G30 Max LE2. I take it its the same bearingwise? The factory ones are pretty weak. Mine are dead after a little over 200 km. Thanks for the video. Helps a lot!
What size barring ? and which glue again the brand
You can give bearing grease the same Effekt !!
Thank you very much, this video helped so much.
Will do this when I change to front fork suspension next week
Hi, I don't see the link to purchase the bearing from Amazon?
Hey I just bought a g30 max ,5 days ago .
The motor is making a little thumping sound when it switches from drive to Regen, . Also the motor has a whine to it my other one doesn't , and ideas 🤔. Thanks ,great video 👍
No idea... Strange
shfw?
are the 6001z sealed bearings okay/better?
Did you have to add bearing grease
Great video... I just bought A Max G30LP and at 100mi (60km) are already experiencing a failure. Question: should I bother with warranty replacement since the scooter is only 2wks old? Or would you just recommend upgrading right out of the gate? Thanks!
I personally would upgrade but that's your call 👍🤘
@@randomrepair1680 Roger that! I appreciate you sharing your opinion! I'm thinking that is the direction I'll end up going. Thanks again for the video!
I think I lost the spacer… sheesh. Any specs on it? What type should I look for?
Loved the squirrel
How about back tire?
what is the bearing you use for the rear wheel?
thanks very much, could I ask if I did not change the damaged bearings what willl haben?
Eventual the wheel won't spin, which can cause a crash. Until then, your range and speed will be lower
Hey quick question? I notice you used 6001 for the front and 6003 is that for size? I'm just wondering plan on doing mine soon. Thanks
That's right. Best of luck!
Nice video.
I have a little problem with the « Dashboard » it always shows me the « Red wrench » and the « Red Temperature icon » Beside each other.?
Any code?
Thanks for your Video ! :) (from holland)
Thanks for the video, I bought a couple of Skf for the front, I’m gonna do this upgrade soon. Just wondering one thing, if I’ve seen properly you haven’t use any vaseline or grease for the bearings. Should I do it? Thanks
Not needed. They are internally lubricated then sealed from factory
@@randomrepair1680 ok perfect, thanks!
@@randomrepair1680 at the moment I’ve solved only with “Wd40 ptfe”, but only because I’m not using the G30 often (here in Italy there’s a second lockdown, kind of 😅). But the problem sometimes comes back again, so I must change che bearings.
Got 96km and I need this done.
Rode in rain?
Random Repair tiny bit.
Same haha
After a winter in salty slush on the icey roads in sweden I had to replace bearings(lasted 1650km) thank you for the diy guide!
@@randomrepair1680 the rain caught me by surprise and now the front started squeaking after a day.
Same for the back?
where do I get the part from??
I looked at this video a few weeks back, placed an order for bearings, and tonight i finally fixed the front wheel!
Thanks for the great video!
ps. When i test-rode it just now, i still had a little of that stuttering/shaky feeling, even on flat ground indoors, could it be that i need to swap motor bearings too?
That's usually usually how those feel when they are regulating the power
Thanks for the Video! Works also for the G30D 2? I need to chage mine
I don't know about size. Just confir
@@randomrepair1680 Ok thanks, i google it and i can use it on my G30D 2 also🥳
Great video!
12:48 squirrel watching the show
That was my buddy that year. Very friendly. Unfortunately I don't think it survived winter
Hallo,
Wenn das Rad wieder mit den 17 er Schrauben befestigt werden muß eine Unterlegscheibe dazwischen oder werden die ohne Unterlegscheibe befestigt???
Beste Grüße aus Darmstadt
ja, die Lager-Dichtungsflansche und Gabelwangen sollen sich nicht berühren.
What’s that blue stuff you put on the screws
Thread locker. Blue locktite
i wonder how much resistance the bearing have under load and 25kmh, cause mine have the same issue and after the first wet morning with no rain it started squeaking but i didnt notice any increase in battery drain but now after like 120km and a thunder storm rain ride to the store it have started to drain more cause i did get about 5-6km in Sport and it drained 15%-18% and now its drain 18-28% the exact same road to work-.-
Have you checked tyre pressure?
@@nameberry220 well, when i bought it they was rock hard it felt like so havent bother checking and i feel like they are still hard when driving over bump etc but i maybe should check it out.
@@LinusF_ they always feel hard but you should check correct pressure i recommend 55psi for best range
Are you able to provide a link of where you got the bearing from? I heard you say a place but couldn't quite make out what you said. I live in Australia so finding hard to find the SKF 6001-2RS1/C3GJN
I bought from local auto parts store.
Try amazon or eBay?
@@randomrepair1680 Thank you. Have tried Ebay and Amazon and the prices were crazy. I found a local bearing company and will give them a call on Monday to see if they stock them. Thank you.
@@rdp8545 good deal.
Any Brand name 6001 will work just make sure it's fully sealed
What’s the part number at Napa?
I have a problem, after instillation the wheel doesn’t spin as freely as on your video but spins for like 5-6 seconds and then stops. New SKF bearings. Do you know what might be the issue?
Is it front?
@@randomrepair1680 yup
not greasy enough
@@randomrepair1680 what if it is in rear wheel? Is that normal? As my G30D rear wheel isn’t moving freely just like the front wheel. Need your valuable advice/suggestion on this!
Thank you very much for the nice & helpful video. 😊👌👌
@@mohammadshamsularafin3905 its because motor is on rear wheel
Hey, i just got mine 3 days ago...and there is written that it drives 65km , but battery gets empty at 30-32 km. Do u have same?
Yeah that's about right, they way overestimate
How long have you had the scooter when you made the video?
This one was about 3 months old
Great vid
How do you perfectly size the bearing? There are so many, very similar, sizes. Thanks.
Just use the exact numbers from the video and you will be fine
@@randomrepair1680 oh, sorry, I was meaning generally. I have a different wheel. I searched a "bearings" web site and was amazed at the number of sizes... in thousanths.
@@bob-ny6kn it's crazy. Get as close as possible and usually a home run
Cheers
I got the f40 series. What bearing size should i use for the front and rear?
How long did the upgraded bearings last?
Still going
@@randomrepair1680 Thanks for replying! How far have they gone so far :D
What brand/size/part number bearing is that?
Where find bearings?
Hi there, after how many miles would you say these bearings need replacing?
Great vid by the way 👌🏼😊
Mine had 200kms or somewhere around there.
@@randomrepair1680 so probably a good idea to buy these bearings as a spare just in case they got out of production for this scooter. Will get some in 👍🏼
Mine have 1450km on clock, I'm using time to time WD-40 PTFE spray, everything works fine
@@joAO-87-TugA they will always make these... Its not just for the ninebot made
I had ceramic ones and got 1400 miles out them in t4 max
In how many kilometres does the bearing broke down?
I have drive my Ninebot MAX G30E II for over 1500km, no issue with the berings jet.
Im 182cm and 85kg.
Заднее крыло хорошо держится ?
Hi can you please tell me what the piece that you're holding at 5:34 is? (what the name is).
Shaft
I cant get the brake hub off help please
Can anyone answer if this will work with the Max G2 lmk👍🏽
you say the brake drum gets off easy, but i cant get mine out, what do i do?
Tap gently with a small hammer
@@randomrepair1680 i did and the brake drum fell off together with the axis, now how do i get that bearing inside the drum brake out of the axis? i couldnt hammer out the axis out of the drum brake, the bearing inside the drum brake actually felt quite smooth (just like in your video), so i just left it in there
Thanks
The torque should be similar to a bicycle which would be around 22 - 27 Newton metres for a front and 24- 29 for a rear.
Do i need to put glue? I dont have this type of glue could i use something differnent?
Any kind of gasket maker or rtv should work. Yes keeps water out of your motor
@@randomrepair1680 thanks. And these bearings was also okey right what i wrote? Gonna buy tomorrow. Wrote under the rear change i think video.
@@raigo66 good bearing
@@randomrepair1680 thanks. U think i should wait if the sound comes and then change it or change it tomorrow front and rear.
I checked the sound and it was gone at front wheel.
@@raigo66 if it was making sound the bearing is bad. I would get on it for sure. Take your tim, be careful
Front and the rear bearings are the same?
They aren't. Watch my other video for that
Hey really like your video, but I have a question. What are the measurements of the bearings because I can't find the right ones.(plus do you have any recommendations for upgrading those bearings?)
The numbers of the bearing are the size.
As long as you get double sealed you should be fine 🤘
Do you know the bearing size for a 10 inch motor and the number where can i get it thanks
The size is listed in the video
So that scooter you have is a 10 inch where did you buy it sir ?
@@Robert127 Amazon Canada.
@@randomrepair1680 thank you sir have a blessed day from Austin TEXAS
Thanks Dude
What’s the size of the bearing from SKF
Same size
Can you believe it. Segway ships their units with WARRANTY VOID IF EXPOSED TO WATER. If you drive through a puddle, or in the rain, or wash it, then WARRANTY IS VOID.
I'm now here to watch disassembly videos of the motor hub, which I avoided before as I didn't want to void my warranty. Only made surface maintenance, probably very ineffective, as you can't get your wd40 near anything close to the axle...
I've now been chewed off on page 7 of the user handbook, in which it says that exposure to water voids your warranty.
So the fact that I had a bearing ball snap in half is due to water. Sure, and I was born yesterday.
I'll see what I can do to fix it, and I will never purchase another Segway product again.
Anyone have a link to the bearings he used?
Were to get that bering?
Pretty much any auto parts store should be able to get you an equivalent if you give them the number
Is it a 6001 Skf ?
@@asassinggoodoverevilanyday2116 skf is the brand. The number refers to the size
Thank you 👊🏾👊🏾👊🏾👊🏾
Bro u easily took of the hub from the wheel and i cant take it off how u did this
Hi, I just lightly tap and pry. Just be careful since it's cast.
Your light have more sealant applied
He used SKF 6001-2RS1/C3GJN bearings
Just got a 2nd hand max. I thought it was just the noise echoing through the hollow front bar.. until I spun it freely. sounds like a common problem.
And omg. Had a compaq presario 970 a looooong time ago lool
Hahaha, spotted that eh?
@@randomrepair1680 what can I say, eagle eyed lol.
Btw, is for the bearing, what's the difference between 6001-2RSH and 6001-2RSH/C3? I'm assuming both can be used?
@@a9fc yes. Some of these number refer to seal type as well as if its made by a different manufacturer
@@a9fc Radial clearance:
C1 = smaller than C2
C2 = smaller than CN
Without suffix = CN normal clearance
C3 = greater than CN
C4 = greater than C3
C5 = greater than C4
GJN = high temperature grease, polyurea soap-mineral oil, -30 to +150°c.
Get SKF 6001-2RSH for front, they should be good. 2RS1 is older contact seal.
Номер подшипника ?
какой нужен подшипник на самокат digma allroad max
Here is tip : Allways Change not only one but allways two ;)
any link for ninebot max front wheel bearing, can someone put the link for a new one please
Check my other vids....
@@randomrepair1680 lol, that was really helpful
Mine went like this after riding in heavy rain for a couple of days I might try some WD40
The sound is because the grease washed out and the bearing is damaged. Wd40 may help for a short time
nahh mine doesn't sound like yours
گریس توی بلبرینگ کم است و زود خراب خواهد شد ،شما کاسه نمد داخل بلبرینگها را در آورده و تو کانال را پر گریس کنید یعنی هر بلبرین یک کاسه نمد به سمت بیرون توپی داشته باشد
Why are these scooters always so dirty in such videos, like people don’t know how to clean their scooters. I clean all of my scooters at least three times a week as I ride daily but they never get as dirty as this one.
Some people care and some don’t I’d say.
get some abec 9s lol
If amateurs change bearings. omg
Why? what did he do wrong?
@@fireworkscloud Nothing.
That isn’t squeaking! Wannabe mechanics 😂
🤣🤣🤣🤣 Jessica
Front bearings part number 6001-2rs1/c3gjn
Can you use skateboard bearings?
I don’t see why not as long as the size is correct