No. 3 - LOWRIDER ST - Current Mods - Walk Around
HTML-код
- Опубликовано: 16 янв 2023
- Hey Y’all,
My name is Zach and I’m from San Jose, CA (Northern Cali) and this is my first official video.
I’m always searching online for videos of Harleys like mine and like to watch what other people are doing to their bikes. Figured I’d do the same and hopefully give y’all the same enjoyment/entertainment that I get from watching these vids on RUclips.
I’m new to all this so any advice on new videos I should do and/or how to do them, please let me know.
I included a parts list below, if you want to see a dedicated video on a certain part or certain area of the bike just let me know and I’ll upload one.
I’ll try to do some vlogging as well but would need someone to explain to me what to get and how to set it up.
Alright y’all, see ya in the next one!
Parts list:
Thrashin 9.5” pull back risers
Thrashin Mid Bend Bars
FloMotorsports Levers
Thrashin grips
Gorilla Cables
Thrashin Bar Bag
Lidlox helmet lock
Memphis Shades hand guards
Klockwerks wind screen
Lower Fairings
Custom Dynamics micro bullet front turn signals
Custom Dynamics ProBeam Low Profile taillight
Custom Dynamics Softtail adapter
Custom Dynamics Genesis 4 Amber/Red turn sig
Thrashin Mini Floor Boards
Thrashin Shift Linkage
Thrashin p-54 rear pegs
Green Brothers adjustable brake linkage
Bungking crash bar
Saddlemen Road Sofa
Saddlemen Step-up
Saddlemen passenger back pad
Robert Becker seat lock
Harley Flush mount gas cap
Full Stek Dyno Sheild PPF (Not Recommended)
Amazon Inner-Bag cup holder
Removed the fork reflectors
Stage 1:
FuelMoto Jackpot Riot 2-into-1
S&S stealth air intake
DynoJet Tuner 
Авто/Мото
Bro! for a first time, its absolutely a sick video. What even more sick is your setup! You blew my mind with that lower fairing! I'm from the East Coast and I haven't seen that around here at all!!!! And I haven't seen what other content you posted yet, but I'm hoping to see a POV of you cruising as well as looking forward to hearing how those pipes sound. I'm planning on buying a ST soon myself an was also looking into the Saddlemen Road Sofa seats but was curious how it would look on the bike. Thanks for clearing that up for me! Looking forward to future content. Ride Safe!
Thanks man 🙏 appreciate that so much
Beauiful Bike ! I just came across your channel in my feed actually and I'm happy to support your efforts and those of other fellow moto content creators. I look forward to seeing and hearing more from you in the future, keep up the great work and ride safe out there.
Thanks man 🙏
Sick set up all the way around love how that bike looks from front to back killer set up
Thanks bro!
Great video. I just picked up a 23 ST 2 days ago. Traded in my iron 883 and I have a list of parts I’m changing/adding. I’m going to get the same seat you got. That seat is sexy. I was going to go with the S&S 2 into 1 but I think I’m going to get the jackpot after hearing yours. Beautiful bike.
Ride safe brother
good walk through for your first video man. Keep it up. And a GREAT Bike!
Thank you so much!
Absolutely beautiful ! Well done 👌🏻🤘🏻
Thanks a lot!
Really nice mods, really looks awesome and all ties together so nice. Drooling over this bike.
Thank you so much, really appreciate that 😃🤘
This is the the cleanest build i seen so far. Taking notes TY.
I'm in the middle of my build right now. Same bike but 2023 model. Really useful video. Thank you!
Same here
Brilliant video, Zach, thanks for sharing. Some of the nicest combination of mods I've seen for the Low Rider ST, too. For your next video, please could you get somebody to film you on the bike? I'd be really keen to see how your tweaks have adjusted the rider triangle - I'm also 6ft1 so wondered if I would need to fit forward controls for this bike.
Thanks man! Sorry for the delay in videos I have been having a reoccurring issue with my camera in my iPhone breaking and I believe it is because of it being mounted to my handle bars :/ I did finally buy a brand new GoPro 11 but trying to figure out the editing software have been a bit of a nightmare
Nice looking and love the Klock werks windshield. I’m subscribed
Thanks man! Sorry for the delay in videos I have been having a reoccurring issue with my camera in my iPhone breaking and I believe it is because of it being mounted to my handle bars :/ I did finally buy a brand new GoPro 11 but trying to figure out the editing software have been a bit of a nightmare..but soon!
Great job, nicest st I’ve seen yet.
Thanks man 🙏 appreciate that!
She bad. I’ll have to post a video of one we did with a 135” motor. But your lowrider is awesome. Love the lower fairings, and the bars, money on the windshield also 👊🏼
135” god damn! 🤘🔥🤘
Great to see the lowers on there, balances out the bike with the bags. Without the lowers it would look top-heavy and something is missing. Overall great video!
My thoughts EXACTLY! It just does not look right without lowers, looks incomplete
Black and copper color combo 🔥 🔥
Nice bike bruh! Awesome setup..
Great looking bike Fam. Welcome to the motovlog Ohana. 🤙🏾🔥
Thanks bro! I’m still trying to figure out how to use Final Cut Pro..shits confusing
Love the lowers that looks awesome
Thanks man!
When getting a wrap, there should be no lines or bubbles. However, it could take 2-3 weeks for bubbles to form and the shop should take care of those for free if any do appear. Everyone thinks they can wrap a vehicle but its a art and a science. Alot of good wrappers out there but 100x more crap wrappers too.
👏🏻 well done!
🤘
Nice bike bro!
Those clear hand guards are.dope
Beautiful bike man
First thing that stood out for me was your mirrors. They complement the headlamp well. Nice.
Thanks man! Simple but perfect 👍
Sick ST been wanting one. You're also from San jose, we should ride soon. I ride a 2018 Street bob!
We’ve got a lot of the same upgrades. I’m grabbing a road sofa though. Good to hear the review. Have the step up rn.
Great minds think alike 🤙
Nice looking at the Low Rider ST. Crashed my daily cycle( a Moto Guzzi) last year. I'm in the mountains near you. Shiny side up!
Thanks man! Ya, I got taken out by a mustang on hwy 1 by a mustang out by moss landing a few years back.
Nice mods. visual balance is preserved. I'm much shorter than you so won't probably need the windshield but I like the dual seat setup. My girl is gonna need something similar!
Your girl will def appreciate the Saddlemen Explorer RS (road sofa), Trust me!
Great share Fam 🤙🏾🔥
Thanks man!
Clean 👍🏼
Thanks bro
Bike looks dope man.
Thanks man! 😁
Hellbent on buying a Low Rider ST. Parted with a Road King I received (long story) recently and I’m old enough to not wanna hop back on a super sport any more. This bike just strikes that balance between performance and ride-ability in a way so few do. Plus it’s dope as shit so that doesn’t hurt
The seat makes the biggest difference..the Explorer RS (Road Sofa) is what I have and it makes the bike extremely comfortable
Fuck Yeah! Came over to check your sled out and got two problems knocked out. Was looking for a solid option to replace the led running light/turn signals. That custom dynamic setup is clean. The brake n clutch/lowers issue as well. Appreciate it! ⚡️⚡️
Also, I dropped a S&S 465 Cam into mine. The performance/Sound? Fukn off the charts! Same tuner and intake but different pipe. Dyno’d around 139 TQ and 124 HP.
@@lowriderstliving Hell ya Bro 🤘
Best Phone mount I ever had as well
"I'll Always Love you Hayden Panettiere"
Nice bike
Looking Nice 🙂
Thank you!
Clean ass bike!
Thanks bro! 🤘
Sounds good
🤘
Hate to be a copycat lol, but I'm definitely getting some of these mods for my new ST as well. The way yours looks is stunning!
Hell ya, Thanks man! I appreciate that, I’m stoked you dig it as much as I do
Badass bike! I love the way it looks. Did you have to change the cables to run those risers and bars?
Thank you! Ya, I had to get some longer cables..went with gorilla cables
Awesome set up. I also have an ST. Jackpot exhaust? Cam it yet? I actually know n live near fuel moto. Looking into a package atm. Jamie tuned my sports bikes wayyyy back in the day. He knows his stuff!
Ya, got the jackpot..but that new contender pipe looks pretty sweet, I think I may have go that one had it been available at the time. No cam for me at the moment..the bike stock is pretty damn powerful, don’t think the homies would be able to hang if I throw one in 😂
bike is a beauty. i think i might go with that seat, i have an sdc pro and don't like it that much.
Thanks bro, I love the Saddlemen Explorer RS seat but my only regret is not paying the little extra to put seat heaters in it for the driver and passenger
Invest in some heated grips. I put them on all my bikes. You'll love m!
Glad to hear you likethe windshield! most reviews have been negative on the 6" klockwerkz. dont you get any buffeting at 130 mph or below?
Knock on wood, I haven’t had any issues with it and it’s been a night and day difference from the stock windshield. At 130 my head is slightly tucked and I do Not get any buffeting…now if I hit 130 sitting up straight I’m sure the buffeting would be insane
Beautiful bike! Looks like we’re in the same area. Just got my ST last month and am currently having a similar issue with getting a PPF wrap. Waited 6 days and it ended up looking like a complete rush job as well. The shop owner told me to wait 3 weeks for the wrap to cure and that the air bubbles would go away too, but it’s looking even worse. I’m actually taking it back in tomorrow for them to redo most of the bike. Maybe we took it to the same place? 😂
What’s up man, I made the horrible horrible decision to PPF my bike. It looked like absolute shit both times they did it. In the process they ripped the paint off my lower fairing, tried to be slick and wrap it black, cross threaded the bolts that hold my lower fairing, cut into the paint when they cut the wrap..and a lot of this was visible right when I got it back and when I finally got sick of the ppf and had it removed I seen even more f’d up shit. Biggest mistake I made was getting the bike wrapped, if your able to get out of wrapping I suggest you do it. Your heart was in the right place wanting to protect that beautiful paint but we don’t have any true professionals around here that can actually do it. The company that did mine was ‘Precision Automotive Paint Protection’ in Santa Clara, CA
I have since gone to a body shop and had everything fixed on my dime in fear of going back to the place that wrapped it and getting f’d over even more..I just wanted to be done with that whole experience, lesson learned and hopefully someone who’s thinking about wrapping their bike reads this before they do it
Very nice ! Great 1st video. The new bikes won’t start if it’s not in neutral. It’s not a bad habit to check though.
Haha I just realized that the other day. I was wtf am I having a wiring issue or something 🤦♂️
If a roadglide had a baby with a dyna this is it!
😂 pretty much
Love what you've done to your bike. I'm 6' tall and looking at Thrashin risers and thinking 9" risers maybe too tall for me. Currently considering 8" risers. How tall are you for riser comparison?
Thanks man! I’m 6’1 and the 9.5in is perfect and a set of mid bend bars will give you a little more height..if anything I feel like they could be taller but I love the setup
Sounds tough Fam
Thanks man!
Custom Dynamics for the win.
Hell ya 🤘
The rockform mount is a bit spicy but I like mine as well.
Yes, parts list please.
This Bike is super HOT.... wow....great job....Gratulation....
Thanks man!
When you did your risers did you get new cables and all I was looking at the thrashin 9.5 pullback
Can you let me know if the HD sissy bar is the small or taller one? Also did you have to buy the sissy bar pad separately or did you just put the one that comes with the Seat on the back? I’ve been debating on which one for a while now
Love the bike and content tho!
Subscribed.
What’s up man! I did the standard Harley sissy bar and they sell it without the back pad which is good cuz the Harley back pads are cheap and shitty, Saddlemen is the way to go for the back rest and the seat.
nice set up, which wire/cable extensions did you use?
ride safely and enjoy your bike its awesome.
Thanks man! I used Gorilla Cable extensions and an extended brake and clutch line from Harley
@@California__Kid__ thanks
Thinking about buying especially after seeing those lowers. Hows the wind protection? Do you think it would be a good touring bike? (I like more of the sport touring bikes but LOVE my Harleys as well)
Wind protection is good with the klockwerks windshield and I here they make a 10 inch now so if the 6 inch wasn’t tall enough the 10 inch will def do the job
Dang where to start. My '23 is arriving shortly and out of the 1.2 trillion RUclips videos I have watched for reference yours is far and away the best for accessories. First one indeed...
You have put on pretty much everything I have considered (include one I did not, the Lowers). I'm 6' to you 6'1, and was considering the 6.5' Thrashin riser because no need to get extensions and I thought it would suffice. When you sit on the bike flat feet to the ground, are your knuckles above or at your shoulders? Klockwerks - check, seat lock - check, S&S Stealth Air intake - was your shin hitting the OEM intake? The Saddlemen Road Sofa - my last bike was a RG Special and I loved the HD back rest. Does this seat offer adequate lower back support?
Great vid and thanks for listing everything.
Hell ya 🤘 and thanks man! Did you get white or black? I was originally going to get 12” bars but it was slightly above shoulder level and I feel like I had a little less control so I went with the 9.5” which is perfect..it sits just slightly under my shoulders, gives me the best posture, and most control. The way the bike is stretched out, your legs don’t hit any of the air filter even with mids..my sporty I used to have would be rubbing against the intake all the time, pain in the ass that was.
@@California__Kid__ I’m #2 at the dealer for black, #1 for white. I want to like the white but likely going Lord Vader black. I sooooo wanted a Wicked Red like my last bike but no joy there. For 120th anniversary I think HD dropped the ball on the colour.
How’s the back support with the Saddlemen?
Nice video. So i am 6 feet tall and i tried HD 10" windshield which was not good at all for my height. Too much buffeting. I want o get the klockwerks just not sure if i should go for the 10" or 6" 🤷🏻♂️
Thanks man! Personally I like the wind hitting me in the chest when I’m riding but I don’t like the helmet buffeting I was getting with that stock windshield..switched to the 6” klockwerks and I still get the wind to my chest but no head buffeting..not a fan of a huge windshield, I feel like if I’m gonna block the wind that much I mind as well drive my car
You should do a video for your turn signal install. By far you have about the only and best solution to the turn signal relocation.
Thanks bro..I haven’t posted in a minute because the handlebar mount on my bike keeps knocking out the camera on my iPhone..I just bout a new GoPro to start making legit videos but trying to figure how to use the Final Cut Pro editing software is very confusing..but soon
@@California__Kid__ lol I totally get it if you want a bad ass case and handlebar mount look at peak design. I’ve been make some content on my other channel and have been using the iphone14 pro camera an iMovie it has been working great for now till get try and do some real editing
I just got mine. First one ever
The lowers really make your bike look so different.
Bike looks sick man! I didn't know they made a Road Sofa for the Softails? We learn something new everyday. Any plans for motor work or keeping it at a stage 1?
Gonna keep stage 1 for now, if I ever have motor probs or something big that needs changing then I’ll prob upgrade to a stage 2 or 3
@@California__Kid__ is there a local shop that can order 2in1 exhaust and install them, I want to take my FXST to stage 1
@@krishneellakhan1118 the exhaust laws in California keep getting worse every year. it’s like trying to smuggle drugs across the border to get an aftermarket exhaust..but to answer your question, I’m not sure if the shop would order it for you and if they did there would be a markup on it im sure…but if your local, I’d recommend Slabsides..ask for Mike or Rodger
Two Corrections **I have a black Saddlemen Explorer RS (Road Sofa)** also **I called my other seat a Thrashin Step-up 🤦♂️, it’s a brown Saddlemen Step-up
yo, sick bike. Link to the roadsofa? Looked all over the saddlemen site and don't see it for the fxlrst
When I bought the seat from Saddlemen is was called the Saddlemen Explorer RS (road sofa) but now it is called the Saddlemen Explorer LS
saddlemen.com/explorer-rs-softail-harley-davidson-9?finder_id=43&variation_key=801%2C76%2C133%2C807&search=FXLRST%20Low%20Rider%20ST&description=true&page=4
Low Rider ST is an awesome bike, but I have been eyeing the 2024 Road Glide ST. So, I may ended up with 2 bikes 😅
Looks nice man!👍🏼👍🏼
Couple questions
Where can I get those lower fairings, seat bolt, and how much was the seat?
Thanks in advance
Also I’m in California as well near SF what area are you in?
Thanks man! Lower Fairings I got from @Toldesignsoffical (IG), the seat lock I got from @RobertBeckerDesign (IG), and the seat costed me approx. $450
Right On, West Coast Best Coast! I’m in San Jo
@@California__Kid__ oh shit! South Bay! I’m actually I Hayward!
@@California__Kid__ thanks for the info
@@bradbucklin2692 no problemo
How hard was it to do the tall risers? Did you have to rewire? Thanks,,,,,,ps. awesome bike. Cool video
There is a local Motorcycle shop here in San Jose, CA where I live by the name of Slabsides, they are the ones that did my risers, lower fairing install, and hard wired my tail lights. Thanks for the support 🤘
Did you have fitment issues with the lower fairings and the crash bar?
Where did you get those lowers? Looks real nice!
Thanks man! I got them thru a company on IG @toldesignsoffical
How are you liking the lowers?
Nice bike! Where did you get those lowers?
Thanks man! I got them thru a company on IG @toldesignsoffical
How did you get the roadsofa for the low rider? I don't see any that fit on the saddleman site.
It’s actually listed as the EXPLORER RS (Road Sofa) on Saddlemen website
Is it actually a road sofa and not an explorer ? Looks like an explorer and I don't think the sofa would fit. Very curious. I will be buying one in a couple months
What’s up, Its actually called the EXPLORER RS (Road Sofa) so both maybe 🤷♂️
Is that the stock rear brake lever? I want to put floorboards on but my lever is the same height as the boards making it tough to press. Thank you.
I was running into the same issue when I put my floor boards on but I found a solution! There is a company by the name of ‘Green Brothers Designs’ that make an adjust Brake linkage so you can raise or lower the height of the stock brake arm…hope this helps
looks amazing. have you done a multi-day trip yet?
Ya, my girl and I took a trip to LA (6-7 hours) and spent a few days down there hotel hoping and exploring on the bike…I’m planning on going to sturgis this year
@@California__Kid__ I am trying to figure out my ride to go as well... the ST is looking promising to me.
@@rayclearwater1753 the bike is amazing but the seat is going to make the trip easy or hard..the Saddlemen step-up is comfy, good bar hoping seat…but the Saddlemen Explorer RS (Road Sofa) is comfy AF for the long hauls for both u and your passenger
Cool bike. Do you not feel to cramped up without forward controls? Cool mods
Personally I do not feel cramped, forward controls would def make it more comfortable tho..however because of how I ride, I prefer my feet under my knees for better handling
@@California__Kid__ Cool I might go for another ride on this. I have always had forward controls and maybe its just what im use too. Cheers for the reply
Can you use the bung king crash bars as highway pegs or ar the lowers in the way?
You can use it as highway pegs but not comfortably and your feet only fit on the ends of the bar
Did you do a tune after the new air cleaner and pipe?
Ya, I used a PowerVision Tuner with a pre-installed map from FUELMOTO
Very nice bike man, how was the buying experience at Harley? I want one of these but been hearing bad experience story’s because the dealers are trying to rip people off.
Initially I placed my order in the beginning of June at house of thunder Harley Davidson, put my refundable deposit of $1000, and was told by their sales guy that my bike would be in by the end of the month..bike never came even after 3 months but I was told everytime I did check in that it would be here by the end of the week..with the riding season coming to an end I was starting to get very impatient and just wanted to ride so I called all the dealerships in California and the only one that had the black ST was Harley of Sacramento. They told me that somebody just backed out of their order, they have the bike, and will honor any price I had with house of thunder..I said GREAT, I’m in my way!!! Took an Uber up to Sac and got my bike that night…then when I told house of thunder I already got my bike and I want my deposit back then they tried to do me dirty and say it was non refundable but once legal action was threatened I got my deposit back..
@@California__Kid__ hey thanks for answering my question. I decided to hold off on buying a Harley from a dealer, I’m going to wait a year or so and buy one used. Going with a supermoto for now. Get my feet wet and have some fun without a $25000 price tag.🤙🏻
Nice job so far Zach, looking good. I can help you with any questions you have on Moto Vlogging setups if you want, feel free to shoot me an email and check out my other videos on helmet setups on my channel.
Ride safe brother!
Thanks man! Which editing software do you use to put your videos together and how did you learn to use it??
Hey man do you happen to have the Part # for the Saddleman Road sofa? I’m looking to get a comfortable 2 up seat for my girl on my 2023 Lowrider ST . Was looking at the Le Pera Tailwhip as an option because I didn’t know the road sofa would fit the bike
Just seen this now, I was able to find a part number and put it in the comments below (someone asked the same question). Lemme know if you can’t find it and I’ll try find it
Saddlemen part no. 818-29-029LS
It’s the Saddlemen explorer RS (Road Sofa) with LS stitch pattern
Do your hand guards hit your windshield?
Naw, they sit just above and back
got a ? being 6'1 i see a lot of people saying their back, hips legs hurt after few hrs on the bike. whats your take? did the riser , seat and mini floor help with comfortability ?
What’s up man, Im 6’1 190lbs and I haven’t had any of those issues..there have been only 1 time my ass actually hurt and that was riding the bike home from the dealership which was a little over a 2 hour drive on that stock Harley seat..the other time was when I had to break in the Saddlemen step-up seat…but as far as the ergonomics I personally have not had an issue..at one point I thought about maybe installing forward controls but because I ride pretty aggressive I wanted to keep my feet under me..I have ridin 7hrs straight on my bike and haven’t had any issues..the risers did definitely help as the stock setup had me reaching forward the whole time, the Saddlemen Explorer RS was a game changer for me and def my passenger
@@California__Kid__ i appreciate the feed back
Didn’t know the road sofa would fit a lowrider. Just curious if it isn’t an explorer?
It’s the Explorer RS (Road sofa)
@@California__Kid__ thanks 👍🏻
Hey man, which backrest, passenger pegs and passenger seat did you use?
I mean where did you purchase,
I actually have 2 Saddlemen seats..both purchased on Saddlemen.com..I have a brown/black tuck’n’roll step-up with the matching backrest that I’ll show in a diff video…and I have the black one which is the Saddlemen Explorer RS with the LS stitching in black..the matching backrest I have is the Explorer LS Contoured
Passenger pegs are from ThrashinSupply.com and they are the P-54
Is that seat the road sofa or the explorer? It seems like the explorer
The Explorer RS (Road Sofa)
6’1……… you think you could ride this instead of a road glide ???? I have a 16 street glide i’m thinking of downsizing
I’m 6’1 as well, 200lbs, and a very aggressive rider so the Lowrider st is perfect for me but a few of my friends don’t like the mid controls on my bike because they are a little higher up on the bike which I think is to get a better lean angle and better control plus I still get some baby tour benefits because of the mid size and the bags
But the road glide is a bad ass bike as well..my buddy has a road glide and he rips on that thing, both nice 🤷♂️
Do the lowers come painted or raw?
They come ready for paint, so you can take down to your local autobody shop or motorcycle shop and have them painted and I stalled
A Harley does 130 mph for real
Haha
Did you change the brake pedal
Same brake pedal but I had to put a brake level adjuster by GREEN BROTHERS DESIGN to raise the height
Don’t know if I missed it but did you cam it yet?
Not yet, haven’t had the need to. The 117 out the box on this thing is insane, you can wheelie this beast no prob with everything stock haha it’s wild
@@California__Kid__ have the same intake. Similar pipe. Threw in a S&S 465 Cam. Took it from what you’re describing to a 124 HP 139 TQ monster!
cant find this seat for the st, do you think u can drop the part number please
Saddlemen part no. 818-29-029LS
@@California__Kid__ is your sissy bar standard or short height one
Heated grips make a world of difference.
That’s next! But I’m curious if the diameter of the Thrashin bars will work for the Harley heated grips…do you know the answer to this?
@@California__Kid__ im not sure about the thrashin bars. They say they are 1” bars and internal wiring compatible. I would ask them. The left grip needs to be fully bored out. My grips are on the stock bar so they work, but first I tried to use a flymoto 1-1/4” bar which you would think wouldn’t be a problem. But the left grip opening could not receive the internals of the left heated grip. The wall thickness of the bar was too thick at that end. The throttle side was fine. Of course, I didn’t discover this until I had everything disassembled!
@@jstockwell73 well I tried to add heated grips but unfortunately it’s just too tight of a fit to run more wires..and if I get a short I may be fucked so I’m prob just gonna have to put up with the cold ass wind or buy some thick ass gloves
@@California__Kid__ wire pulling lube worked for me, plus depinning. But I get being cautious.
What in the heck is ppf??
I plan on wrapping my st with 3m material
PPF is Paint Protection Film..like a clear 3m..be careful
@California Kid
Aha gotcha
Sweet bike man
I originally ordered the st in gunship grey but after seeing it in person
Vivid black was the way to go
Can you send me a link to where you got your sissy bar please!!
Hey!
www.harley-davidson.com/us/en/shop/sport-luggage-rack-for-holdfast-sissy-bar-uprights-gloss-black/p/50300131A
I didn't think the Saddleman road sofa fit the Lowrider.......
My apologies, I should have explained this better. It’s the Saddlemen Explorer RS (Road Sofa)
@California__Kid__ that's what I thought, thanks for the clarification.
130km?
Of course 😅
***If you guys throw forward controls on ur ST, your not gonna be able to throw lowers on..and visa versa ***