Hey Dude, you did a great job showing me just what to do! Thanxs, No stupid "RAP" music in back ground, Just gave us what we needed to know, AAAAAAAAAAAAAA+++++++++++++
Cool video thanks for making this! Question if this injector is not working will this put gas in my oil ? I know if other injectors are broken this will happen
Is that brown connector next to the engine coolant temperature (ECT) sensor and attached to the incoming coolant line? I broke my ECT female connector and the both the sensor and the connector next to it looked busted up and in need of replacement. I just have to figure out exactly what it is first.
+xavier sepulveda thanks man! I'm pretty sure my sensor is the problem. Those things don't come cheap.
5 лет назад
The CPU water temp sensor is right next to it, so remove that one too and scrubbing pad clean the immersed surface of oxidation and film. Doesn't hurt as the coolant is drained. Get them both clean at the same time.
Hi dear I want your help for my toyota carolla 2006 Dear my car toyota carolla is not start when car engine is cold..... I am very worry for this problem on my car Please help me What can u i do to solve this...... I am waiting your reply...
Does anybody know where I can obtain one of these discontinued Thermo Time Switches #89462-20010? When I tested mine there were no ohms in cold or hot water. There seems to be available ones for TURBO #89462-30011; does anyone know IF that will work on a 22RE 1988 2.4L 4x4 pickup? IF not, does anyone know if this can be bypassed?
Hey bro Can you please help me my sensors don't have the connectors so I made connectors but the thing is I dint know the colour code of each sensor there are 2 green wires but one has 2 Brown stripes next to each other every inch or so and the other green wire has 1 single Brown stripe every inch so was wondering if you could look at your and tell me the colours and what sensor it belongs to please thanks
Hola Xavier Tengo un celica 90 el cold inyector no recibe electricidad no se si es algun problema de fusible o un cable roto Y otro el fan de el radiador esta directo en frio y caliente ,siempre esta trabajando desconecto el sensor de taperatuta y no para le desconecto el relay y si para no se que puede ser Gracias por tu ayuda
the sensor that gives the signal to the injector, you said you were gonna leave a link, but I found that out and I tested it. It is Ok. My problem is no electrical signal to the cold starting injector. Could it still be the sensor..?? or the relay..?? where's the relay..?? Is not in the engine fuse box.. is it inside the pick up by the hand brake..?? I'm gonna try to find a manual. Please help if you can... Thanks.
I’m hoping someone can help me out. My truck has a brand new fuel pump and it will run with starting fluid or pouring gas down the intake. It will crank forever but want start.
Did you check that the fuel is making it all the way to the front? These trucks have fuel pump cables sticking out by the rear passenger side wheel well. Make sure nothing is damage. Check injectors are working properly. There's a lot of stuff you have to check
Xavier Sepulveda whenever I loosen the bolt on the injector gas sprays out. But when I took the injector out it doesn’t spray gas. I just cleaned it as well.
thanks for the help iam been dealing with that problem for 8 months 1987 turbo straight axle running excellent now
Very helpful video, good camera shots, good narrative. thanks xavier!
Hey Dude, you did a great job showing me just what to do! Thanxs, No stupid "RAP" music in back ground, Just gave us what we needed to know, AAAAAAAAAAAAAA+++++++++++++
Cool video thanks for making this! Question if this injector is not working will this put gas in my oil ?
I know if other injectors are broken this will happen
I no longer have this video and can’t test that for you
Soy un nuevo suscriptor se un poco de electromecsnico una pregunta a ese inyector la pcm le manda tierra o corriente espero tu respuestA
Victory !! Thanks for posting, great video...
Is that brown connector next to the engine coolant temperature (ECT) sensor and attached to the incoming coolant line? I broke my ECT female connector and the both the sensor and the connector next to it looked busted up and in need of replacement. I just have to figure out exactly what it is first.
THANK YOU, My friend YOU save the cost of $138.00 usd for the piece. Very help full video. CONGRATULATIONS
+ALESSANDRO RIZZO thank you for watching
It think this may be why it's taking me 3-4 times of cranking 😂😂. Gonna try this out tomorrow. thanks.
Thank very much my friend. My 93 Mr2 Turbo was hard to start before I watch your video. Now my baby starts in less than 3 turns.
+kem keohacksa thank you for watching
I will keep an eyes on you posts. Thanks again.
Thank you,a shop just tried to up sell me this switch for $250,gonna try and clean mine first,if not i can still save $150 replacing it myself.
+MrChunkylover53 glad I could help
was your toyota sitting for a while because I have a toyota that starts and runs but shots off
No. I really miss this truck
Excellent job, very impressed. Aloha Kona boy Honolulu Hawaii
When you removed the sensor, did radiator fluid start draining?
Radiator fluid should be present
+xavier sepulveda thanks man! I'm pretty sure my sensor is the problem. Those things don't come cheap.
The CPU water temp sensor is right next to it, so remove that one too and scrubbing pad clean the immersed surface of oxidation and film. Doesn't hurt as the coolant is drained. Get them both clean at the same time.
hola xavier , bueno el video pero tengo una pregunta le cold injector sensor todo el tiempo funciona o Nada mas cuando esta Frio el motor
solo cuando vas a prender y esta frio
Ok gracias por el dato xavier
my truck have an issue has aways flooded the cold start and have to wait 20-25 minutes before it can start again do you have any idea
t could be a lot things. can't really say
xavier sepulveda it's the tps
kong lee it's the tps
Is that a 22r or 22re
Hi dear
I want your help for my toyota carolla 2006
Dear my car toyota carolla is not start when car engine is cold.....
I am very worry for this problem on my car
Please help me
What can u i do to solve this......
I am waiting your reply...
I'm sorry but I don't have this truck anymore
Nice catch. Thanks for sharing.
Thank you so much. Like the others, you saved me so much money. Great video my friend, great video.
Excellent instruction video, clear and concise.
Y no sabes como se llama ese inyector yo tengo una igual que no pulsa pero los cables están bien del arnes
got it figured out thanks any way working perfect
Great video man! Im experiencing the same problem. Will see if its the same thing. Thanks
Thanks
Does anybody know where I can obtain one of these discontinued Thermo Time Switches #89462-20010? When I tested mine there were no ohms in cold or hot water. There seems to be available ones for TURBO #89462-30011; does anyone know IF that will work on a 22RE 1988 2.4L 4x4 pickup? IF not, does anyone know if this can be bypassed?
Hey bro Can you please help me my sensors don't have the connectors so I made connectors but the thing is I dint know the colour code of each sensor there are 2 green wires but one has 2 Brown stripes next to each other every inch or so and the other green wire has 1 single Brown stripe every inch so was wondering if you could look at your and tell me the colours and what sensor it belongs to please thanks
I don't have that truck anymore
very good explanation. thank you!
Good video, thanks bud!
Thank you for watching
cual es la función del sensor que esta antes del cold start injector?
si te refieres al de frente de motor, ese sensor detecta la temperatura del coolant y determina si el motor necesita activar el cold start injector
hola mi toyota no enciende enfrio sera ese el problema porq los cables del sensor de adelante estan
trosados
22r is a carbureted motor 22re is EFI
Hola Xavier Tengo un celica 90 el cold inyector no recibe electricidad no se si es algun problema de fusible o un cable roto Y otro el fan de el radiador esta directo en frio y caliente ,siempre esta trabajando desconecto el sensor de taperatuta y no para le desconecto el relay y si para no se que puede ser Gracias por tu ayuda
puede que este video te ayude ruclips.net/video/Ee9SC0K0nK8/видео.html
lo de los abanicos puede ser que alguien los haya puestos directos o el relay no esta trabajando corectamente
how do you test the timing sensor I did not see the link.
I did not work on the timing sensor
the sensor that gives the signal to the injector, you said you were gonna leave a link, but I found that out and I tested it. It is Ok. My problem is no electrical signal to the cold starting injector. Could it still be the sensor..?? or the relay..?? where's the relay..?? Is not in the engine fuse box.. is it inside the pick up by the hand brake..?? I'm gonna try to find a manual. Please help if you can... Thanks.
muy buen video amigo
I’m hoping someone can help me out. My truck has a brand new fuel pump and it will run with starting fluid or pouring gas down the intake. It will crank forever but want start.
Did you check that the fuel is making it all the way to the front?
These trucks have fuel pump cables sticking out by the rear passenger side wheel well. Make sure nothing is damage. Check injectors are working properly. There's a lot of stuff you have to check
Xavier Sepulveda whenever I loosen the bolt on the injector gas sprays out. But when I took the injector out it doesn’t spray gas. I just cleaned it as well.
@@jakhebsallee5027 fuel is reaching the front but the injectors are not working? Check all relays and fuses related to the injectors.
Very helpful .
+John Church thank you
good job help out a bunch
Quiero saber como carburar un motor fuel inyection toyota 22r 2.4 cuntan buelta lleba la entrada del aire y cuntas la de gasolina
No se
The last 5 digits on my sensor is 20010 all I can find is 20020-20040 I wonder if any of those will work.
Tommy Lawless what part number did you end up using? Im having the same problem
i too have 20010 which I read was discontinued.
Hola xavier tengo una toyota 93 22re y aveces tarda en prender huele a gas podria darme algunas pista te lo Agradesco
pues yo no soy mecanico pero lo primero que verificaria son las bujías (spark plugs)
Ya le canbie eso filtro de gas cables tu cres ke tenga ke limpiar el throttle body ???
+omar h verifica que tenga corriente en la ignición. el motor prende?
good shit brotha!
thank you for watching
can you tell me witch one of them wires was the one that went to the ignition ?
glen petitclerc I don't have that truck any more.
nice!
thank you
thanks. I think that's my current problem..
+manuel hernandez thank you for watching
si prende anda corriendo pero aveces cuando la parkeo tarda en encender y tira umo negro
suena como que tiene gasolina de mas. verifica que la linea de retorna de gasolina no esta tapada
Ok deja cheko y te dejo saber gracias amigo por tu tiempo
+omar h ok
Mine started leaking after removing to clean.. now it leaks on to my engine bay
shiiiiiiiit!
Change gasket
Thanks
no problem
ya las canbie los cables el filtro de gas tu cres ke tenga ke ber el throttle body
22re engine mine is a 93
Good job save money
hola papi
+Michael smith who are you?
+xavier sepulveda SATAN...LORD OF THE UNDERWORLD PAPA