WARM TIPS: We didn't make subtitles specially, because RUclips comes with multi-voice subtitle function, you can use the subtitle function according to your country's language.😀回复
If you purchased your TSDZ8 from Varstrom, you will receive after-sales service. If you purchased your TSDZ8 from somewhere else, we do not provide replacement parts. This may not be compatible.
Hi there. Love you're content & currently waiting for my TSDZ8 to be delivered tomorrow hopefully. I want to ask you if you know would I be able to use my "ebike" UKC1 display with the TSDZ8 as the kit I bought comes with the vlcd5. I have the UKC1 as well as a M6C, kt-lcd8c, kt-lcd7c, sw900. I already have a 1-5 cable & a motor programming cable if I'm going to need it. I just realised that a few of your videos that you have "ebike" screen come up when you first turn on the display. Hence my asking about the UKC1 I have. Thank again & I appreciate any help or advice. 🙏🏻👍🏼
Hello friend, regarding the use of ukcd1, you need to check whether the connection line between the instrument and the TSDZ8 controller matches, then check whether the order of the pins matches, and finally check whether it complies with the Tongsheng protocol.
Hi Team, being torque senor motor we don't need gear shift sensor and any break sensors ? I assume that the moment we stop pedaling we can use the breaks and they will not interfere the work of the motor? And also to switch gear we just need to provide a little torque but it would not be enough damage the chain for example? Thanks and keep the good work )))
Hi there, both of your points are correct. The torque sensing motor can be used with or without a brake disconnect wire，but our kit includes a brake disconnect wire。and considering that if the motor is inthrottle mode, the brake motor will still have power when the brake is pressed, for safety and security reasons, I still installed the brake disconnect wire.
Also, your second point is true. But I'm a DIY guy, haha, I like to put everything on my bike and make it a luxury version.The kit does not include a shift sensor, but if the motor is high power such as 1000 watts, it is recommended to install a shift sensor.😄
WARM TIPS: We didn't make subtitles specially, because RUclips comes with multi-voice subtitle function, you can use the subtitle function according to your country's language.😀回复
Does Varstrom sell replacement parts for the TSDZ8?
If you purchased your TSDZ8 from Varstrom, you will receive after-sales service. If you purchased your TSDZ8 from somewhere else, we do not provide replacement parts. This may not be compatible.
Hi there. Love you're content & currently waiting for my TSDZ8 to be delivered tomorrow hopefully. I want to ask you if you know would I be able to use my "ebike" UKC1 display with the TSDZ8 as the kit I bought comes with the vlcd5. I have the UKC1 as well as a M6C, kt-lcd8c, kt-lcd7c, sw900. I already have a 1-5 cable & a motor programming cable if I'm going to need it. I just realised that a few of your videos that you have "ebike" screen come up when you first turn on the display. Hence my asking about the UKC1 I have. Thank again & I appreciate any help or advice. 🙏🏻👍🏼
Hello friend, regarding the use of ukcd1, you need to check whether the connection line between the instrument and the TSDZ8 controller matches, then check whether the order of the pins matches, and finally check whether it complies with the Tongsheng protocol.
👍 Hope it all works out perfectly for you. 🤞
Hi Team, being torque senor motor we don't need gear shift sensor and any break sensors ? I assume that the moment we stop pedaling we can use the breaks and they will not interfere the work of the motor? And also to switch gear we just need to provide a little torque but it would not be enough damage the chain for example? Thanks and keep the good work )))
Hi there, both of your points are correct. The torque sensing motor can be used with or without a brake disconnect wire，but our kit includes a brake disconnect wire。and considering that if the motor is inthrottle mode, the brake motor will still have power when the brake is pressed, for safety and security reasons, I still installed the brake disconnect wire.
Also, your second point is true. But I'm a DIY guy, haha, I like to put everything on my bike and make it a luxury version.The kit does not include a shift sensor, but if the motor is high power such as 1000 watts, it is recommended to install a shift sensor.😄
Does the does this 750w mid drive motor same as the 500w having delay when you use throttle while pedalling uphill?
Generally, a 750W mid-mounted motor will have less lag when using the throttle when climbing a hill.