Snehalika your method of teaching is superb. Communication is very very clear. Even a poor student like me also can learn easily. Thank you very much 🙂
You are giving to good explanation on this topic. Thank you so much. But I was meny time suggest for adding no advertis they also disturb us to make focus. Please.
Armature winding is also designed to have high inductance as the work done is taking place in armature winding it should posses high inductance and low resistance to decrease the power loss.
Please tell about DC series motor difference universal motor and one more questions I give AC supply in DC series motor RPM difference explain& please explain whyslip ring induction motors using VFD
In series winding there is also inductance of field is higher. So Jst like a DC shunt motor will it affect by the phase displacement between current and voltage waveforms in armature?
In series wdg no turns are less compared to shunt. And we know inductance is directly proportional to the no.turns square. So we can neglect inductance concept in series but not in shunt.. I think it's clear.
Superb communication skills mam. Keep doing videos. Love your explanation. My doubt... Are there any chances that my watch doesn't work due to induction effect in 400kV switchyard or near a generator which produces huge currents?
Now a days Snehalika mam not posting any new videos l need six pulse or 12 pulse converter, vfd plz share me your english pronunciation I like and I clearly understand
Great explanation but I have a doubt. I think, series motor also has a winding, which produces inductance property to the motor so, the field current and armature currents also be in 90 lagging?
Current drawn by motor would lag due to winding, hence poor power factor. As both armature and field are in series both will experience same lag and hence in sync.
how can we improve power factor by increasing no of poles? decreasing no of wing=ding is ok to my logic..hope doubt will be cleared by pi square academy..thanks for the video
Hello Madam You have told that the inductance is coming in picture for using AC Supply is given to the dc shunt motor So,Field Current is lagging .But ,So When this current is passing through the series motor that time should we not inductance in this picture?
Hi mam .I'm watching from bangladesh .I have a question for you . In dc theorem calculations we consider that two different ratings current source's can not be connect at series ( so far i know at this condition current=0 ). but why ? and what would happen if i connect two different ratings current source's at series in practical ? I hope you will make a video on this topics .......thank you .
![Seungmin "그렇게, 천천히, 우리(As we are)" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/kAzmhLHePqU/mqdefault.jpg)
Perfect communication skill to explain things
I am an electrical engineer , you explained in the best possible way,
Ur teaching skill is mindblowing.
Pretty awesome..of both of u.. please carry on..
Snehalika your method of teaching is superb. Communication is very very clear. Even a poor student like me also can learn easily. Thank you very much 🙂
Mam, your lectures are amazing. Nicely explained👩🏫
the easiest and best explanation .. Love from Bangladesh Sir.. ❤️❤️
I learnt so much in such a short power video - Wow. thank you so much Mam
Ur explanation was osm......👍.....I love 2 learn more with your videos pls make it same types of interesting topics....
Best explanation with good communication.. Thanks for giving informative lecture!
Why Technical girls are always been the point of my attraction ? 🙀
Sahi bola bhaiii
Maybe because you are a sapiosexual. 😁
Yes y 🤔
Because no one likes you
@@RahulRaj-vg4jb 😂😂😂
You are giving to good explanation on this topic.
Thank you so much.
But I was meny time suggest for adding no advertis they also disturb us to make focus. Please.
Just make the video offline and then watch.
Fallen in love with the subject only because of your teaching mam thank you so much mam
it's very informative and practical way to learn machine behavior thanks for making such kind of videos. Keep it up #pisquare team
madam ur teaching is ultimate
Maam's nature very nice. Easily learned
Superb Explanation Mam.... Continue doing Videos on Interesting facts in electrical topology ..... Perfect communication skills.....Superb voice mam...
Wow enjoyed watching ma`am , very informative and with sense of humor..
Excellent mam your point of explanation
Sooooooooooper xplanation mamaaaaaa...........
The technique of explanation is very good.
Beautiful explanation!!!
Thank you so much for this valuable information.
Helpful explanation..thank u madam
Explanation is nice and looking simple and good😋
I like your lecture mam. I love my machines
Very good explanation...
Please make a video on "how to find the kv of transmission line"? Ma'am
Very nice lecture! Thank you so much ma'am
Awesome explaination... really
Very helpful to understand electrical fundamental concepts
Wow ...very good lecture...
thank you for clearing the concept
how backemf is electrical equivalent of torque?
Good explain everything and excited
Well explained mam... We want more informative videos...
Good explanation mam..thanks
I love it when people use math to prove or explain the facts..........great skill though tq for the insights
Love the way u teach
(Pi)^2 == Quality content....
Dear mam, kindly also explain what is the criteria for operation of a motor with vfd ?
Thank you so much mam, for crystal clear explanation 😀😀😀👍
very informative. thank you
Great job 👍❤️
Hi Superb Teaching Style - N Ur Veryyyyy Beautiful Thank you
There is in one correction at 2:41, you had mentioned field is parallel for both series and shunt motor. Please correct it.
Nice explanation ma'am 🙏
Hi madam how DC relay coil working...!?
Mam Superr explained & wow what a confidence in Electrical realyl great can you share your knowledge topic on harmonics in next videos tq very much
at 4:58 😍😍
Superb ya👌👌👌
Mam capacitor will connect
Simply superb mam....
good delivery
Armature winding is also designed to have high inductance as the work done is taking place in armature winding it should posses high inductance and low resistance to decrease the power loss.
Nice explanation madam.
Thanks
Madam are you practical d c motor with. A c supply
Please tell about DC series motor difference universal motor and one more questions I give AC supply in DC series motor RPM difference explain& please explain whyslip ring induction motors using VFD
Love her voice.
Polepitch concept video link share cheyyara medam
In series winding there is also inductance of field is higher. So Jst like a DC shunt motor will it affect by the phase displacement between current and voltage waveforms in armature?
Am too have a same doubt can any one rectify my doubt
But here two parallel paths for current flowing in shunt motor and in series motor only one to flow so obviously same phase in series I think sooo
In series wdg no turns are less compared to shunt.
And we know inductance is directly proportional to the no.turns square.
So we can neglect inductance concept in series but not in shunt..
I think it's clear.
Can we add capacitor to improve pf
If you want to improve the power factor then capacitor should be connected in parallel
Yes
Thank you mam good explanation
Please mam tells why shunt winding is highly inductive
BHABESWAR BEHERA it is used for the production of flux...thats why it should be highly inductive
That explanation was nice as the song played in the background in which i am going to dance after my exams 😂
Mam can u explain about synchronous condensor
Superb communication skills mam. Keep doing videos. Love your explanation. My doubt...
Are there any chances that my watch doesn't work due to induction effect in 400kV switchyard or near a generator which produces huge currents?
Now a days Snehalika mam not posting any new videos l need six pulse or 12 pulse converter, vfd plz share me your english pronunciation I like and I clearly understand
Nice video mam.love it😊
Simply Wow...
excellent lecture
Thank you mam 🙏🙏
👍👍
Beautiful mam😍😍
💯🙈😘🙈💯
Kuch samj nhi aa rha😍😌💕
Great explanation but I have a doubt. I think, series motor also has a winding, which produces inductance property to the motor so, the field current and armature currents also be in 90 lagging?
Current drawn by motor would lag due to winding, hence poor power factor. As both armature and field are in series both will experience same lag and hence in sync.
Nicely Explain
Hai sir /madam iam join ur academy plZ full details iwant
I can observe giri sir way of explaining in ur lecture...are u ace academy student?
good lecture ,mam
how can we improve power factor by increasing no of poles? decreasing no of wing=ding is ok to my logic..hope doubt will be cleared by pi square academy..thanks for the video
Hello make video on special motors
Good explanation
In motor concept en=v -ia ra,
Not armature inductance value it should be resistance approx 1 ohms
T = ia sq in series motor
T= is in shunt motor
I wish mam was my lecturer
Worthy.....😁😍😍😍
Well explained and interacted mam ❤
Why overhead transmission lines r not insulated?
Cost
yes only bcoz they need good insulation to provide huge voltage flow and this will definately increase cost
Nice lecturer 🤓
Hello Madam
You have told that the inductance is coming in picture for using AC Supply is given to the dc shunt motor So,Field Current is lagging .But ,So When this current is passing through the series motor that time should we not inductance in this picture?
Madam your teaching way so greatful but sometimes you explain tricky so plz explain little bit easy
Plz describe armature flux on main field flux otherwise I can not understand why IF and IA are same phase in dc series motor
Well explained...and using by drawings....ppts are lil disturbing..
Why the series motor no load speed is dangerous ?
Each cycle is 10 or 20ms ??
4:57
For 50 hz,total time is 20ms, for positive half it is 10ms, f=1/T
mam,make video on why transformer not work on dc suppy?
The flux is constant in dc so no induced emf on secondary nd there's no output
No back emf no energy conversion
Tqs🎉❤❤❤❤
Sweet voice Telugu Valla madam
Mam TDEP ke vedio bhi upload kre please
Why shunt branch parameters are not there in DC machine and synchronous machine in equivalent circuit?
There is no core loss
Every machine there is core losses
I am talking about dc machine there is no core loss
In DC machine also there is core losses in armature and field section
Hi mam .I'm watching from bangladesh .I have a question for you .
In dc theorem calculations we consider that two different ratings current source's can not be connect at series ( so far i know at this condition current=0 ). but why ?
and what would happen if i connect two different ratings current source's at series in practical ? I hope you will make a video on this topics .......thank you .
Violation of KCL will occur which causes impulse voltage
hi mam..i have a doubt .if we add no of poles then how inductance decrease.
Speed decrease