JBL 1000 subwoofer !!!! Repairing Renewing restoring and fixing - restoration project (asmr) - diy
HTML-код
- Опубликовано: 28 сен 2023
- Section 1: Troubleshooting and Diagnosis
1.1 Visual Inspection: Start by carefully examining your JBL subwoofer for visible damage like torn cones, dented enclosures, or loose connections.
1.2 Audio Testing: Listen for problems such as distortion, weak bass, or unusual noises to pinpoint the issue.
1.3 Component Identification: Familiarize yourself with the subwoofer's components, including the cone, voice coil, and amplifier.
Section 2: Necessary Tools and Materials
2.1 Tools: A list of essential tools like screwdrivers, soldering iron, multimeter, and wire cutters.
2.2 Replacement Parts: Guidance on sourcing replacement components like cones, voice coils, amplifiers, and cables.
2.3 Safety Measures: Ensure you have safety gear such as gloves and eye protection for a secure repair process.
Section 3: Disassembly
3.1 Removing the Subwoofer: Step-by-step instructions on safely extracting the subwoofer from its enclosure.
3.2 Subwoofer Components: A breakdown of the various elements within the subwoofer housing.
Section 4: Common Repairs
4.1 Replacing Damaged Cones: Detailed guidance on cone replacement and alignment.
4.2 Fixing Voice Coil Issues: How to address voice coil problems like overheating or misalignment.
4.3 Amplifier and Wiring Repair: Troubleshooting and fixing amplifier and wiring-related issues.
4.4 Enclosure Maintenance: Tips for maintaining the subwoofer enclosure to optimize sound quality.
Section 5: Cleaning and Maintenance
5.1 Removing Dust and Debris: Steps to clean the subwoofer components to enhance performance.
5.2 Lubrication: Properly lubricating moving parts to prevent friction-related issues.
5.3 Preventive Measures: How to protect your repaired subwoofer from future damage.
Section 6: Reassembly
6.1 Putting It All Together: Assembling the subwoofer components back into the enclosure.
6.2 Wiring Setup: Correctly connecting wires and ensuring proper polarity.
6.3 Testing: Evaluating the repaired subwoofer before reinstalling it in your audio system.
Section 7: Reinstalling and Tuning
7.1 Subwoofer Placement: Tips on optimal subwoofer placement for the best bass response.
7.2 Wiring to the Amplifier: Properly connecting the subwoofer to your amplifier or receiver.
7.3 Sound Calibration: Adjusting settings to achieve the desired bass performance.
Section 8: Troubleshooting
8.1 Common Post-Repair Issues: Addressing potential problems that may arise after repairs.
8.2 Seeking Professional Help: When to consult experts if issues persist or worsen.
Conclusion:
Repairing and fixing your JBL 1000W subwoofer can be a fulfilling endeavor, restoring the ground-shaking bass you love. With the right tools, knowledge, and patience, you can once again experience the powerful lows your subwoofer was designed to produce. Don't let a malfunctioning subwoofer hinder your audio experience; use this guide to bring back the beat.
Vintage audio restoration
DIY subwoofer repair
JBL subwoofer enthusiasts
Subwoofer cleaning
Lubricating subwoofer parts
Preventing subwoofer damage
Audio system DIY
Speaker cone alignment
Subwoofer wiring setup
Subwoofer sound tuning
Speaker troubleshooting guide
Audio equipment cleaning
Speaker restoration
Vintage JBL electronics
Subwoofer component replacement
Voice coil alignment
Subwoofer wire soldering
Subwoofer maintenance checklist
Audio quality enhancement
Subwoofer repair safety
DIY audio restoration
JBL sound systems
Subwoofer disassembly guide
DIY speaker maintenance
Speaker cone replacement guide
Voice coil repair techniques
Subwoofer wire connection
Subwoofer sound calibration
Audio equipment repair guide
JBL audio gear
Subwoofer troubleshooting tips
Electronics repair skills
Subwoofer maintenance and cleaning
Restoring JBL subwoofer
Subwoofer installation
Subwoofer wire polarity
Sound system optimization
Speaker maintenance and repair
Audio system maintenance
JBL subwoofer technology
Speaker enclosure assembly
Preventing subwoofer wear and tear
DIY audio gear maintenance
Vintage JBL sound
Subwoofer reassembly
Subwoofer wire connection guide
Sound system testing
Subwoofer placement for bass
Speaker setup guide
Enhancing audio quality
JBL subwoofer maintenance
Subwoofer component cleaning
Reviving vintage audio gear
Speaker voice coil alignment
Vintage JBL speakers
DIY speaker cleaning
Subwoofer repair process
Subwoofer maintenance tips
Speaker cone alignment guide
Subwoofer wiring polarity
Sound system tuning tips
DIY audio equipment restoration
JBL audio restoration
Speaker troubleshooting and repair
Subwoofer enclosure assembly
Audio equipment care
Electronics repair guide
Vintage JBL technology
Subwoofer reinstallation
Subwoofer tuning
DIY subwoofer maintenance
Speaker voice coil repair
Subwoofer wire soldering tips
Audio gear repair
Vintage JBL subwoofer
Speaker maintenance techniques
Subwoofer component diagnosis
Subwoofer performance improvement Развлечения
Ммм, ремонт динамика без центровки, приклеивание на глаз, обожаю))
Меня тоже с этого вынесло. Но к удивлению вроде нормально получилось
Да оно в принципе, такое себе. Ремонт динамика который по крайней мере у нас стоит 500-1000р🌚🙃 Самый Китай из китайских
Ещё и без норм инструментов в стиле деревенского ремонта
сам динамик стоил 3500-4000 новый😂
Зато он делает трррррр
And just like that, a Jbl speaker from Wish was born.
И в конце видео показали как катушка бъет об магнит. Класс!
Инженеров JBL хватил приступ после просмотра этого видео 😂
Не бит, не крашен, слушали исключительно классику🤓
После такого, от жбл остался только логотип
Да чёт для заявленного киловатта катушка выглядит ватт на 100-200, наверное изначально только логотип и был.
а что еще могло остаться, кроме шильдика короба и магнита?
Изначально там от jbl только название 😂
Жбл это изначально и есть логотип. Весь динамик китай.
You made a crucial mistake when you didn't shim the voice coil former to assure alignment. If it plays without rubbing. You got very lucky.
He made a major mistake by fixing this garbage.
@@LerRhannSome things aren't worth fixing
Ah hear the lovely coil rub
Откуда горе ремонтнику в лавке знать про центровку...
that a F, sad, costly all a F waste of time, but if you mastered the job, can be that a worthy job?
I find it very satisfying to see how the coil enters by itself
Most shops in my area swear these arent worth repairing
And this is true
not worth paying someone to repair* do it yourself, save money and learn something
Semuanya adalah ciptaan manusia
@@denianggaradytch2029gak nyambung sama yang dibahas
😊😊😊😊😊😊😊😅
First, when you put the membrane, center it and then stick it, but as you did without centering, the coil will wear out again and if it is not centered well, it will shrivel and say again 😅😊
Да блать, проще новый купить!
Ты даже неотцентровал, видно мастер дела на глаз😂
А вот как это чудо металлическую пыль из магнита вытаскивало? Я помню что это такое - ремонт динамика. И еще без центровки!😂
Originality can't be restored.
Coil quality matters
You are right, there isn't a recone kit on earth as shitty as the one that came with this shit to start off.
не качество,а центровка
wow, the coil rub sounds amazing 😍
Сжечь катушку киловатного динамика, тут талант нужен.
Эээ, дАрАгой! Нэ бит, нэ кавырян, дэдушка сказки внукам вклучал.
магнит горелкой надо было ещё по греть 😂
Hay que centrar el cono y tienes que poner separadores donde va la bobina 😢😢
Por eso suena tanto, se escucha la fricción.
У меня руки тоже так трясутся после бодуна😂
Bro gave the sub a bath😂
that's... close to a complete rebuild.
its a recone 🤷
Я так то не шарю в этих делах, а мне показалось что круто делают. А потом коменты почитал оказывается Бракоделы мать их за ногу!!!
Geez, I'd just ho buy a new one after all that effort.
Rigggggght
Не бит не крашен.. бабушка по выходным Отче наш слушала.
рабочий день поставщика маркетплейса😂😂😂😂
только всё ломаете, как на заводе всё равно никогда не сделать
Не бита , не крашена)) девчуля слушала))
Estupendo trabajo, quedaron cómo nuevas !?
🇲🇽🚑🚴
Сразу вспомнились ролики пакистанские про ремонт коленвала... Центрануть ток надо было
Пакистанцы уже и до динамиков добрались…!😢
Escrevo de Goiânia Goiás Brasil ❤❤❤. Amei!
а в чем прикол делать саб, без центровки ?
Também achei isso.
Может он делал, в ролике не показывает? Но от JBL тут только корзина с колпаком осталась 😅
И он застучал
@@donkers228потому что частота низкая плюс короба нет
@@Woon_Shen_Hangага делал, поэтому он тарабанит как новый😂
yang paling penting itu harus diatur posisi spul di mana suara yang dihasilkan bisa maksimal. kalau ditaruh begitu saja dan langsung dilem bisa jadi spul itu posisinya tidak pas.
cara terbaik pemasangan spul itu harusnya dilakukan dengan memberi input suara dan spulnya diatur ketinggiannya sampai didapatkan suara maksimal, baru dilem
Главное помыть водой и не закрывать керн😂
Вот это поворот, магнит да ещё и горелкой греть))) там половина мощности слетела уже
Mam taki głośnik już chyba 10lat, po 2 latach spadł mi w zimny dzień telefon na membranę. Subwoofer leżał w aucie głośnikiem do góry. Mębrana pękła, od zewnątrz do środka biegło zakrzywione pęknięcie. Udało mi się od spodu dać łatę z podobnego materiału co mębrana. Łata miała kształt zbliżony do otworu kosza, przykleiłem na super glue w PL "KROPELKA" i działa do tej pory. Fajnie zobaczyć jak ten głośnik wygląda w środku 🙂👌👏🙋♂️
کارت درسته👌
No... we dont need to avoid getting crap in the annular slot... we'll just give it a bath afterwards
You can wrap a piece of loose leaf notebook paper around the coil before you drop it in the motor and it will keep it perfectly centered. Just remember to remove before you glue the dust cap 😂
Nunca mais tem a mesma qualidade! Perdeu todas as peças originais
nice job bro 👍
Muito bom! Excelente trabalho! 10
Get that man a drink, he's shaking like M.J. Fox.
عالی دادا😊
Нормально. Мы тоже в советское время, когда динамики достать было просто не возможно, тоже переделывали сгоревшие динамики. Перематывали обмотки, а центровали при помощи фотоплёнки. Классное время было только это было так давно, что и самому не верится 😢
Gran bel lavoro!!!Che tipo di colla hai usato?
Uma obra de arte 👏👏👏👌
Amazing talent
Thank you
Súper bien 👌
veryyyyy gooddd!!
Very nice,
That cone is immaculate
Very very good
Lol now they sell it at smileys flea market
Bobin kendiliğinden yerine oturdu garib Dünya da bı tek sen varsın galiba bu şekil tek hamlede yapan
Отличная работа.
Через сколько минут катушку сточило?
Молодец, классно👍
Мастер 👍
Super merci
Excellent
Сам бывало то-же перематывал динамики. Хорошо получалось.
good job
Nice knock
Nice work ❤❤
Guys plzz tell what was the glue name...and where it provides
Probably 3M Super Trim Adhesive (automotive stores) or something similar.
Excelente..
I never knew you could rebuild them, ive seen thousands of them in the garage 😢
Now it's called JBL 010
Пойду свой отремонтитую 😂 только я сделаю еще круче)проволоку сам намотаю))))
За 12 лет владения таким динамиком 3 раза менял подводящие катушка до сих пор родная . А то как он зачищал от клея вообще поражает. Ничего что мусор попадает в зазор Керна и корзины и потом во время хода динамика может также шуметь
Lots of work
To apply the glue you need to use a medical syringe. My friend has been interested in repairing old stereo systems since childhood. Refurbished ones reproduce music correctly no worse than new ones.
me gusta el trabajo pero no ases nada sin sentar la bobina 😜
OMG, this is how JBL speakers are made/ repaired😂
Reparação nada, fazer um novo 😂😂😂 ficou lindão
Спасибо. Как раз на улице нашёл 120 ватный динамик от авто
You stole one out of a car? 😮
Как раз на ремонт больше потратишь, чем купить рабочий б/у
Хочешь отдам буфер катушка двухконтурная сгорела на 4 вывода
Super
Да не бывает такого размера динамиков на киловатт!!!! Это гон полный
Bułka z masłem !
Surprised these are even worthwhile repairing
Top😊
Makes it look easy!👍😅
I thought some sort of shim needed to be used when putting in the new voice coil?
சூப்பரப்பு
Parabéns
1000ват с такой обмоткой и диаметром провода, это просто гон
പണിയൊക്കെ ഇഷ്ടപ്പെട്ടു പക്ഷേ ബ്ലേഡിനുള്ള ഉരമാത്രം ഇഷ്ടപ്പെട്ടില്ല, നാട്ടിൽ ഒട്ടുമിക്ക ആൾക്കാരും ഇങ്ങനെ തന്നെയാണ് അപ്പോഴുള്ള സൗകര്യത്തിന് മാത്രമാണ് പ്രാധാന്യം കൊടുക്കുന്നത് ഉചിതമായ മാർഗ്ഗത്തിനല്ല ----
😂
Sathyam aa glue kalayaln ulla solution vedikkan polum payisa illa😂
Must be 1000 Chinese watts now
I don’t think it was worth the time and money to fix that POS but you definitely did a great job. 👏🏻
Супер ❤
Una reparación de parlantes empírica Pero qué funciona así somos en Latinoamérica😅😅😅😅😅😅😅😅
Да перекос катушки дело житейское.уже слышно как цепляет.😊
Next time do a 12" square kicker L7
Y donde venden todos esos accesorios....
Woofer ❌ generator ✅😂
Хорошо, когда запчасти есть.😂
И на продажу, оригинал ёпта!
احسسسسنت😊
не бит, не крашен )