A lil tip i picked up from panning/prospecting for when you're doing a gravity separation like you did to get rid of the ash... Add a few drops of a surfactant like jet dry. Really fine gold like pieces of bond wires weigh so little that they cant break the surface tension of the water. They dont even want to get wet much less sink. they'll float right on the surface and you'll end up decanting it right off... Jet dry will drop the surface tension allowing the good stuff to sink... It ain't a lot, but any gold going into waste is too much imo 😏
I reuse my cotton filter over and over. It seems the filter cleans and gets rid of more junk. For me its better when the filter has already been used 2 or 3 times!
Too much water .. When you add metabisulfite to your Aqua regia solution containing a lot of water, the reaction reduces auric ions to metallic gold. However, a larger amount of water can dilute the solution, making the gold precipitation reaction less effective. It's important to maintain a sufficient acid concentration to ensure an effective reaction. If the solution is too diluted, you may consider concentrating it by evaporating some water before adding the metabisulfite.
@@TrinityGoldRecoveryHello, you extracted the gold from these 6 kg of gold fingers, I would like to know how many more grams of gold would give, thank you, from Brazil 
I still continue to think the best way is grind the electronics, boil in solvent to remove the organics, filter and dry. Then in sequence, HCl bath, filtering and washing, HNO3 bath, filtering and washing and last aqua regia, filtering, washing, reduction, melt. The end.
How can you tell if the gold is staying in the bucket and not getting rinsed out? Cuz I'm currently rinsing my material and I'm waiting a few minutes everytime I rinse but I was worried that I was losing it so I've been saving all the ash stuff that I've been catching in the coffee filter.
@@TrinityGoldRecovery the solder balls that connect the chips to the memory board. Silver and palladium. It comes from one of the best home refiners Geo is what he goes by. I never processed BGA chips off of memory modules because I know there valuable, I always hoarded high yield material, I still do it to this very day but I buy off ebay only since I can't scrap or refine due to the health problems. I believe he's talking about solder balls, I sent a message to him just to confirm. ruclips.net/video/IdLUwwB-LL8/видео.html he talks about it in this video
@@chosen1one930 good to know, glad I'm keeping my bga and IC chips separate. Guess I should keep the sticks separate too, to recover the solder I leave when I remove the chips.
I think you can do that without icinerating the chips. Powdering->adding HNO3->filtering->adding aqua regia to sediment->filtering->adding Na2S2O5 to filtrate, etc… Maybe you want try that 😎
No te conozco de nada pero por tu manera tan destructiva de criticar has de ser un fantasmilla del copón. ¿ Porque no cuelgas un vídeo tuyo y nos iluminas un poco? Sin acritud eh
A lil tip i picked up from panning/prospecting for when you're doing a gravity separation like you did to get rid of the ash... Add a few drops of a surfactant like jet dry. Really fine gold like pieces of bond wires weigh so little that they cant break the surface tension of the water. They dont even want to get wet much less sink. they'll float right on the surface and you'll end up decanting it right off... Jet dry will drop the surface tension allowing the good stuff to sink... It ain't a lot, but any gold going into waste is too much imo 😏
😢😢😢
Yes!!! A disent material and a disent result ❤❤❤ thats are the best videos that many want to see !!! Viva la gold !!!
❤️💫😇 Thanks
When adding SM the first time, only gold will drop, not other metals in the chips?
That was amazing!! I been saving up!!
I reuse my cotton filter over and over. It seems the filter cleans and gets rid of more junk. For me its better when the filter has already been used 2 or 3 times!
Too much water .. When you add metabisulfite to your Aqua regia solution containing a lot of water, the reaction reduces auric ions to metallic gold. However, a larger amount of water can dilute the solution, making the gold precipitation reaction less effective. It's important to maintain a sufficient acid concentration to ensure an effective reaction. If the solution is too diluted, you may consider concentrating it by evaporating some water before adding the metabisulfite.
Hi! Great vids. The last wash in H2SO4, what concentración is it? Thank you
Sulfuric acid is usually 96%-98% concentrated, I dilute the concentrated sulfuric acid with water to remove the borax coating from the gold.
Fantastic yield. Well done again. Very impressive 👏
That's a good yeild??
2.5g from 900g bga memory chips is pretty 👍
Hello, how many grams did you take from the golden fingers of these 6kg of memories?
Thanks for sharing 👍
✌️✌️
Why dont drop with de Gold, cristals nitric urea?
Which one is best method
Dry ashing IC chips or Wet ashing IC chips?
Dry ashing..
How do you do this process without nitric acid?
Escelente y otra pepi pala colecion saludos trini maestro grande😜
Is there any resale value of the circuit boards per kg after ic seperation?
After separating the gold finger and IC chip, the rest of the RAM card can also be sold to recover copper, resin and tin.
@@TrinityGoldRecovery thank you
@@TrinityGoldRecoveryHello, you extracted the gold from these 6 kg of gold fingers, I would like to know how many more grams of gold would give, thank you, from Brazil

What kind of torch you useing
LPEG Gas torch burner
It's a loss bro 6kg ram price in india is 2800 INR per kg means 16800. And u got gold worth 13k.
But you should calculate the gold pin also
@@レトト武田 still in loss or equal. Calculate value of time.
Why don't you do the equation of RAM gold finger.
$50AUD seems pretty expensive, less than half that price in Australia?
At 6:10, can you process the leftover? at 6:10 into video
Mantaaap 🙏
Super.
👍👍👍 멋져요
I still continue to think the best way is grind the electronics, boil in solvent to remove the organics, filter and dry. Then in sequence, HCl bath, filtering and washing, HNO3 bath, filtering and washing and last aqua regia, filtering, washing, reduction, melt. The end.
Cool 😎😎😎👍👍👍❤️❤️❤️
✌️✌️
How can you tell if the gold is staying in the bucket and not getting rinsed out? Cuz I'm currently rinsing my material and I'm waiting a few minutes everytime I rinse but I was worried that I was losing it so I've been saving all the ash stuff that I've been catching in the coffee filter.
That's good ideas
Where can I get these prescription drugs?
You search on google where is the address of your nearest chemical dealers.
wow.....
I got 500 grams I was gonna process today but its raining. Oh well. Ill just take more laptops apart. I have 55 gallon drums full of laptops!
Weary good
Creo que con sulfúrico sacarías más
👍
Excesiva agua
👍👏👏
✌️✌️
Very nice video can you say the purpose of the sodium carbonate please.
There is palladium to recover as well from these types of memory
In ic chips?
@@TrinityGoldRecovery the solder balls that connect the chips to the memory board. Silver and palladium. It comes from one of the best home refiners Geo is what he goes by. I never processed BGA chips off of memory modules because I know there valuable, I always hoarded high yield material, I still do it to this very day but I buy off ebay only since I can't scrap or refine due to the health problems. I believe he's talking about solder balls, I sent a message to him just to confirm. ruclips.net/video/IdLUwwB-LL8/видео.html he talks about it in this video
@@TrinityGoldRecovery only from memory that use solder balls
@@chosen1one930 good to know, glad I'm keeping my bga and IC chips separate. Guess I should keep the sticks separate too, to recover the solder I leave when I remove the chips.
Mending dijual mentah drpd ngolah, ram DDR itu klo gak salah 450k x 6 = 2700k.
Diolah jd 2,5g jelas rugi belum biaya oprasional
Отлично👍
❤❤❤👍👏
I can use paper filter to do that.
+113 👍👨🎓
$183 @ 1,900 Oz
And at todays price 2.85 grams of gold is worth around A$372.50 in Australian dollars (AUD):
Only 0.3% recovery. Sounds low.
Kuya pwediba mag recover ka ng TOUCHSCREENS IC kung meron bang gold sa ic na yan. Hintayin ko ang video na yan, Salamat
I think you can do that without icinerating the chips. Powdering->adding HNO3->filtering->adding aqua regia to sediment->filtering->adding Na2S2O5 to filtrate, etc…
Maybe you want try that 😎
Maybe the waste treatment is a bit easier? Or the grinding part
Kedua
Neutrralizar con urea? Eso es de idiotas kajakaka
No te conozco de nada pero por tu manera tan destructiva de criticar has de ser un fantasmilla del copón. ¿ Porque no cuelgas un vídeo tuyo y nos iluminas un poco?
Sin acritud eh
You are loosing gold, in aqua regia the silver change in nitrate of silver, this cover gold ions.
Water water water water water jajajajaja patetic