Very cool build, unique. Can you please elaborate on the industrial grade double sided sticky tape? That sounds very intriguing & I would like to pick some up
Thanks buddy! There are a few different companies that make the industrial strength tape that is suitable, if buying from the UK, Halfords used to stock the tape and it was used to mount car number plates without screws. A few hardware stores also stock them and we purchased a roll that was quoted as 10kg strength, we tested a small strip on a tin of 2kg dog food and it mounted to a wall for days! Be careful of fake strong tape as there is an endless supply of them, we've given up buying 3M tape as there is millions of fake 3M tape floating around online and you never know it's fake until you buy it. The tape we used in this video was also unfortunately fake, the sight slowly unrolled itself off the barrel which is why the sight isn't present when we test fire at the end of the video. The real stuff can stick a 10kg plate to a wall and it will stay there! Lastly, when buying the tape make sure you look at the specification as some seriously strong tape can be up to 5mm thick. Sorry for the long write up but hope it helps! ^^
It’s a PDi bull barrel base, without any other outer barrel attached, just a threaded barrel end cap for a tracer unit. Our previous short barrel rifle was cut and threaded by ourselves and can be seen in some of our other videos. Thanks for viewing!
Damn nice set, i wish to build kinda similar to yours but like a little bit longer than your short barrel but the parts you're getting may not be available here in the philippines, and i'm using double bell vsr - 10 so i don't know if it's compatible. Nice build 😁
@@Stucyn hi dude! When I tried using the larger springs and guides mine wouldn’t catch the trigger, I’m not sure if that was just the particular spring and guide combo I used though. ^^
@@AirsoftAfterHours I saw on another video using the AA cylinder you used a 13mm spring (which didn't work) and in the comments replying to someone you claimed it was the 7mm spring guide you used - I don't think this combination would work. In the video here when you put the spring guide in (not sure what this one was but assuming 7mm) it fit quite flush with the cylinder. I mean should I just be safe and go 7/11 or opt for another cylinder. Anyway, Thank you very much for replying and hope you are well! Many Thanks, Stucyn 😀
@@AirsoftAfterHours i was just wondering cause I just built a $1000 rifle and someone stole yesterday. So i was looking at something unique to build like this one but for long ranges like my vsr 10 with could get 300 feet at 500fps
Christian Arnold We’re so sorry to hear that! We aren’t experienced in long range builds but your previous rifle is great doing 300 feet at 500 FPS! We would guess that your previous build far exceeds our rifle in range aspect. Good luck with your new build! 👍🏼
Jérémi Caron For me, the twist cylinder seems to perform just as smooth and efficient as the Teflon coated smooth cylinder. In my opinion, I would go for the twist cylinder simply because I don’t seem to gain any benefit (that I can tell) with a Teflon coating. Also, the twist grooves look badass 🤣
Silicone Sword The best 90 degree trigger we’ve ever used is without a doubt the Springer custom Works unit, it’s made like a tank from hardened materials.
Silicone Sword The best 90 degree trigger we’ve ever used is without a doubt the Springer custom Works unit, it’s made like a tank from hardened materials.
Silicone Sword They don’t sell the replacement parts separately but they may (we can’t confirm) offer a repair service or offer parts for replacement if something does wear out. If in doubt you can shoot them an email just to make sure.
We're pretty sure 50 meters will be no problem for a man sized target, but cant say beyond that as the inner barrel is pistol length, although we're interested to see the maximum effective range, we have no access to anywhere that is beyond 15 to 20 feet. Thanks for watching! ^^
@@AirsoftAfterHours okay, you're welcome. I have a plan for my gun to put 200mm 6.03 in there. What do you think about it? Or you have suggestion maybe? And i will set maybe 400-420fps.
@@delarosa8058 200mm inner barrel will be good for an extremely short barrel look, the look that we love the most!. Sticking a 430mm will definitely get you more range and accuracy though.
@@AirsoftAfterHours yeah, but a 430mm to long for me because i will put silincer on there and make me cant move freely.. hahaha.. i want to build medium or short sniper with good accuracy and good range, maybe 50m - 70m is enough. :D
de Larosa This is a fantastic opportunity to build your rifle and test it! If you do, could you report back here and let us know how accurate it is and at what range? It would be an excellent bit of information for the entire Airsoft community 👍🏼
That’s the first thought that I had too, but surprisingly in all bb weights it stays completely within the legal joule rating, which is a big bonus for me ^^
Denver Gonazales Couldn’t find them in stock in the US but these places have them... www.wgcshop.com/products/tokyo-marui-vsr-10-pro-sniper-version-1 Firesupport.co.uk Airsoftworld.co.uk www.defconairsoft.co.uk/product/tokyo-marui-vsr-10-pro-sniper-rifle/ bbguns4less.co.uk/products/tokyo-marui-vsr-10-g-spec-sniper-rifle-in-black.html www.airsoftzone.co.uk/vsr-10-pro-sniper-spring-rifle-tokyo-marui.html
Joao Carlos It’s almost true, there are only a few tiny parts which require sourcing, one being the small screws that hold the hop-up block to the hop up unit and maybe the stock (getting clone stocks is easy, getting aftermarket stocks is also no problem now that Maple leaf have released the MLC-S1 but if you want a stock made by Tokyo Marui they are sometimes hard to find. The price varies heavily depending on the build. ^^
@@AirsoftAfterHours I was thinking of creating a Wolverine Bolt based, absolute best upgrades, VSR-10 but seems pointless to buy a TM VSR-10 and then use almost none of the standard parts :P
Joao Carlos That’s right, if you can build straight from the ground up and also get a stock that has good fitment you’ll save lots of money. Sometimes the only thing I use from the original rifle is the stock and the outer barrel... ^^
@@AirsoftAfterHours Do you happen to have a list of parts you recommend towards this type of gun or should I follow the parts displayed on the video series? The trigger is basically a micro-switch, so, having a fancy trigger/sear/etc assembly. compression parts (piston, spring, cups) and other reinforced parts arent necessary, that is why I am asking
@@tswdev I would suggest outlining the build you are aiming to achieve and then designing from the drawing board. First steps to consider could be: 1) Rifle purpose 2) Joule/FPS limit you are restricted to. 3) Budget Following the parts in my build wouldn't be any good since mine was designed to be a quiet office rifle with a short manageable barrel and fps close to 430. Your desire may be to have a deadly accurate rifle as close to the joule limit as your country allows. The one part I would definitely with our a doubt have again in any build is the SCW Triggers, they really are insane. In a future build I will be hoping to use a W.A.S.P. Piston, they seem very very good quality.
I just did a G-spec length barrel yesterday and used 80 grit to start with, then finished lightly with 1500 grit. I also used Autosol and a few rags to get an almost mirror finish while still maintaining the "machined" look lines ^^
Denver Gonazales It comes with a standard VSR rifle, if you are building from Strathclyde there will be a few items that will be hard to source, Maple leaf makes a hop-up block ^^
If you type in "PDI Bull Barrel Base in google you can't find it on a few websites, try to buy from the closest store to you as it'll save on import tax and shipping fees, Firesupport.co.uk has them in UK and a few shops in Hong Kong stock them too ^^
Wow, only just realised how consistent the readings were, did you guys see how consistent it was!!!!???
I'm about 10 months late but thanks for the help, your tips and guide help me make an awesome VSR 10 with some different and same parts.
Ashton Henderson
You are welcome my friend! 👍🏼
Your are an artist!
Great informative video!
Love your videos. Watch them all the time. Thanks!
Andrew Stevens
Thanks for the support buddy! Stay safe 👍🏼
Awesome build 👍🏻
Want more builds
Alternate title: ASMR video featuring vsr 10
I am wondering at this point in time to make a great vsr 10 part list
Very cool build, unique. Can you please elaborate on the industrial grade double sided sticky tape? That sounds very intriguing & I would like to pick some up
Thanks buddy! There are a few different companies that make the industrial strength tape that is suitable, if buying from the UK, Halfords used to stock the tape and it was used to mount car number plates without screws. A few hardware stores also stock them and we purchased a roll that was quoted as 10kg strength, we tested a small strip on a tin of 2kg dog food and it mounted to a wall for days!
Be careful of fake strong tape as there is an endless supply of them, we've given up buying 3M tape as there is millions of fake 3M tape floating around online and you never know it's fake until you buy it. The tape we used in this video was also unfortunately fake, the sight slowly unrolled itself off the barrel which is why the sight isn't present when we test fire at the end of the video.
The real stuff can stick a 10kg plate to a wall and it will stay there!
Lastly, when buying the tape make sure you look at the specification as some seriously strong tape can be up to 5mm thick.
Sorry for the long write up but hope it helps! ^^
Are you running a after market outer barrel or did you cut it?
It’s a PDi bull barrel base, without any other outer barrel attached, just a threaded barrel end cap for a tracer unit.
Our previous short barrel rifle was cut and threaded by ourselves and can be seen in some of our other videos.
Thanks for viewing!
How did you find the AA inner barrel? I'm looking to upgrade from the standard VSR barrel and do not want to pay the earth
I used the AA barrel in quite a few builds and loved them. I feel they increased my accuracy a lot over the original barrel.
Damn nice set, i wish to build kinda similar to yours but like a little bit longer than your short barrel but the parts you're getting may not be available here in the philippines, and i'm using double bell vsr - 10 so i don't know if it's compatible. Nice build 😁
Hi mate, I'm just wondering if you know if the AA cylinder takes 9/13mm spring guides/springs?
@@Stucyn hi dude! When I tried using the larger springs and guides mine wouldn’t catch the trigger, I’m not sure if that was just the particular spring and guide combo I used though. ^^
@@AirsoftAfterHours I saw on another video using the AA cylinder you used a 13mm spring (which didn't work) and in the comments replying to someone you claimed it was the 7mm spring guide you used - I don't think this combination would work. In the video here when you put the spring guide in (not sure what this one was but assuming 7mm) it fit quite flush with the cylinder. I mean should I just be safe and go 7/11 or opt for another cylinder. Anyway, Thank you very much for replying and hope you are well! Many Thanks, Stucyn 😀
Do you think you can try the mancraft thing or Wolverine Bolt???
I am quite curious and I feel that you would like one of them
Silicone Sword
We would definitely like to try that setup one day, but right now our funds are tight. Maybe one day ^^
@@AirsoftAfterHours thanks my dude 😎😎🏳️🌈🏳️🌈🔥🔥
Does this build still get the same accurate, long range shots?
Christian Arnold
I would say no, we believe the BB won’t be fully stabilised for optimum flight after exiting such a short barrel.
@@AirsoftAfterHours i was just wondering cause I just built a $1000 rifle and someone stole yesterday. So i was looking at something unique to build like this one but for long ranges like my vsr 10 with could get 300 feet at 500fps
Christian Arnold
We’re so sorry to hear that! We aren’t experienced in long range builds but your previous rifle is great doing 300 feet at 500 FPS! We would guess that your previous build far exceeds our rifle in range aspect. Good luck with your new build! 👍🏼
@@christianarnold4699 what did you end up building
Wich cylinder from action army you recommend the best? The twisted one or the plane one?
Jérémi Caron
For me, the twist cylinder seems to perform just as smooth and efficient as the Teflon coated smooth cylinder. In my opinion, I would go for the twist cylinder simply because I don’t seem to gain any benefit (that I can tell) with a Teflon coating. Also, the twist grooves look badass 🤣
AirsoftAfterHours thats the one i bought too thanks
Do you know what 90° trigger lasts the longest???
Or has replacement parts???
Silicone Sword
The best 90 degree trigger we’ve ever used is without a doubt the Springer custom Works unit, it’s made like a tank from hardened materials.
Silicone Sword
The best 90 degree trigger we’ve ever used is without a doubt the Springer custom Works unit, it’s made like a tank from hardened materials.
@@AirsoftAfterHours thanks a lot!!!
Does it have replacement bits???
Cost?
@@AirsoftAfterHours can you get replacement parts for it though???
Silicone Sword
They don’t sell the replacement parts separately but they may (we can’t confirm) offer a repair service or offer parts for replacement if something does wear out.
If in doubt you can shoot them an email just to make sure.
What and where did you get the box thing in the magazine?
How about range and accuracy for this gun? Can it reach 50m or maybe more as well?
We're pretty sure 50 meters will be no problem for a man sized target, but cant say beyond that as the inner barrel is pistol length, although we're interested to see the maximum effective range, we have no access to anywhere that is beyond 15 to 20 feet.
Thanks for watching! ^^
@@AirsoftAfterHours okay, you're welcome. I have a plan for my gun to put 200mm 6.03 in there. What do you think about it? Or you have suggestion maybe? And i will set maybe 400-420fps.
@@delarosa8058
200mm inner barrel will be good for an extremely short barrel look, the look that we love the most!. Sticking a 430mm will definitely get you more range and accuracy though.
@@AirsoftAfterHours yeah, but a 430mm to long for me because i will put silincer on there and make me cant move freely.. hahaha.. i want to build medium or short sniper with good accuracy and good range, maybe 50m - 70m is enough. :D
de Larosa
This is a fantastic opportunity to build your rifle and test it! If you do, could you report back here and let us know how accurate it is and at what range? It would be an excellent bit of information for the entire Airsoft community 👍🏼
Damn that thing probably joule creeps like fuck. I thought my 300mm inner barrel creeped lol.
That’s the first thought that I had too, but surprisingly in all bb weights it stays completely within the legal joule rating, which is a big bonus for me ^^
@@AirsoftAfterHours Interesting, I guess piston weight plays a bigger role
What bull barrel you recommend that fits 590 mm inner barrel and a reciever for the pdi bore up cylinder because i cant find it in their website
Not too sure on that length of inner barrel, I usually stick with 430mm length, sorry ^^
Also how much would the build in the vid cost
Can't remember everything off by heart but the parts I used were mid price range, in-between a budget build and the most expensive. ^^
Where do i find tokyo marui vsr10 stock the base gun
Denver Gonazales
Couldn’t find them in stock in the US but these places have them...
www.wgcshop.com/products/tokyo-marui-vsr-10-pro-sniper-version-1
Firesupport.co.uk
Airsoftworld.co.uk
www.defconairsoft.co.uk/product/tokyo-marui-vsr-10-pro-sniper-rifle/
bbguns4less.co.uk/products/tokyo-marui-vsr-10-g-spec-sniper-rifle-in-black.html
www.airsoftzone.co.uk/vsr-10-pro-sniper-spring-rifle-tokyo-marui.html
List of parts please!!
It looks to me like you could build a VSR-10 just from parts without buying a VSR-10. Is this true? How much are all the parts?
Joao Carlos
It’s almost true, there are only a few tiny parts which require sourcing, one being the small screws that hold the hop-up block to the hop up unit and maybe the stock (getting clone stocks is easy, getting aftermarket stocks is also no problem now that Maple leaf have released the MLC-S1 but if you want a stock made by Tokyo Marui they are sometimes hard to find.
The price varies heavily depending on the build. ^^
@@AirsoftAfterHours I was thinking of creating a Wolverine Bolt based, absolute best upgrades, VSR-10 but seems pointless to buy a TM VSR-10 and then use almost none of the standard parts :P
Joao Carlos
That’s right, if you can build straight from the ground up and also get a stock that has good fitment you’ll save lots of money.
Sometimes the only thing I use from the original rifle is the stock and the outer barrel... ^^
@@AirsoftAfterHours Do you happen to have a list of parts you recommend towards this type of gun or should I follow the parts displayed on the video series? The trigger is basically a micro-switch, so, having a fancy trigger/sear/etc assembly. compression parts (piston, spring, cups) and other reinforced parts arent necessary, that is why I am asking
@@tswdev
I would suggest outlining the build you are aiming to achieve and then designing from the drawing board. First steps to consider could be:
1) Rifle purpose
2) Joule/FPS limit you are restricted to.
3) Budget
Following the parts in my build wouldn't be any good since mine was designed to be a quiet office rifle with a short manageable barrel and fps close to 430. Your desire may be to have a deadly accurate rifle as close to the joule limit as your country allows. The one part I would definitely with our a doubt have again in any build is the SCW Triggers, they really are insane. In a future build I will be hoping to use a W.A.S.P. Piston, they seem very very good quality.
Could you do some paint job in vsr10?
Denver Gonazales
Sure! Here you go ruclips.net/video/85DtkwNxfT0/видео.html
And what grit of the sand paper?
I just did a G-spec length barrel yesterday and used 80 grit to start with, then finished lightly with 1500 grit. I also used Autosol and a few rags to get an almost mirror finish while still maintaining the "machined" look lines ^^
What is the box thing called?
@@Learning_disability
I believe that is the Hop-Up Chamber Block.
Do i need to buy it or it come with the chamber?
Denver Gonazales
It comes with a standard VSR rifle, if you are building from Strathclyde there will be a few items that will be hard to source, Maple leaf makes a hop-up block ^^
I cant find the bull barrel base
If you type in "PDI Bull Barrel Base in google you can't find it on a few websites, try to buy from the closest store to you as it'll save on import tax and shipping fees, Firesupport.co.uk has them in UK and a few shops in Hong Kong stock them too ^^
格好良いね。
Thank you ^^
Hey pls upload a range test
Sorry buddy, we don't have access to any range or space so a range test is out of the question unfortunately.
The t.m tracer looks better.