Here are links to what I'm talking about in this video: -To replace the GFCI plug on your Intex or Bestway Flowclear filter pump (if it does not turn on), Click here: amzn.to/3CCnIew -The Cheaper 58516E Bestway Flowclear Sand Filter Pump that I bought is here: amzn.to/3NBUdi0 -The more expensive version of this pool pump model is the1500 Gallon Sand Filter: amzn.to/3pJq2xp -I highly recommend Pool Filter Sand (although I bought mine locally) instead of regular sand: amzn.to/3O3HF4u -Here is the Bestway Steel Pro Max 14' pool kit: amzn.to/3CyMegu (These links will take you to an affiliate listing that will pay me a very small commission if you purchase. This helps me to continue making videos. Thanks!)
Thanks for making this video. We did ours and water came out slow. We had the tubing wrong and because of that now we got more pressure in the water. Thanks for being detailed. It made it simple to figure it out versus the instructions.
Thanks so much for the great and informative video. Helped me understand this a lot more. Now I can get this pool sorted for my kids to enjoy over the summer. Thanks from NZ 😊
Question what can I do if I’m not feeling the suction for the ports B as shown in your video at 12:05 time I did everything you shown and it’s helped a lot I’m trying to restore my pool for the summer me and my wife have been working hard on it shocking it putting the right chemicals I’ve skimmed it and vaccines many times but it’s still all the way clear.
Good question: I did think initially think that-- I have Fusion360 and an Ender 3D printer, but then I thought, "Let's make a Sand Filter set up video instead!" 😂
I thought you were supposed to keep the cap on when back washing for 5 minutes then take it off when you switch it to rinse to rinse the dirty water out after the back wash 🤨
It's possible that you have something that is loose that isn't allowing it to come up to a higher pressure. Maybe try tightening some of the fittings, or screwing the top part down a little bit more so the gasket can seal better.
@@brandygaddy7429 I know it's quite old video, but i got similiar problem. Solution is simple - ideal pressure is under 0.25. Here is part of the text from original sandfilter notes - "Generally, the recommended sand filter pressure is less than 0.25 Bar (3.5 PSI) when it is running.". So don't worry, everythin works fine.
Here are links to what I'm talking about in this video:
-To replace the GFCI plug on your Intex or Bestway Flowclear filter pump (if it does not turn on), Click here: amzn.to/3CCnIew
-The Cheaper 58516E Bestway Flowclear Sand Filter Pump that I bought is here: amzn.to/3NBUdi0
-The more expensive version of this pool pump model is the1500 Gallon Sand Filter: amzn.to/3pJq2xp
-I highly recommend Pool Filter Sand (although I bought mine locally) instead of regular sand: amzn.to/3O3HF4u
-Here is the Bestway Steel Pro Max 14' pool kit: amzn.to/3CyMegu
(These links will take you to an affiliate listing that will pay me a very small commission if you purchase. This helps me to continue making videos. Thanks!)
Thank you so much for a very details explaination. 🙏🏻💫
thanks from germany!
bitte
Thanks for the video. Greetings from the UK
Thanks for watching! And hi!
Thanks for making this video. We did ours and water came out slow. We had the tubing wrong and because of that now we got more pressure in the water. Thanks for being detailed. It made it simple to figure it out versus the instructions.
So awesome to hear this helped. I aim to please. 😁
Thanks so much for the great and informative video. Helped me understand this a lot more. Now I can get this pool sorted for my kids to enjoy over the summer. Thanks from NZ 😊
Sorry
You are correct,
I was wrong , i only ordered my pump last night 🤭🤭
I have this same pump filter yours deff moves more water then mine
Awesome video thank you
Thanks mate
Cheers
Question what can I do if I’m not feeling the suction for the ports B as shown in your video at 12:05 time I did everything you shown and it’s helped a lot I’m trying to restore my pool for the summer me and my wife have been working hard on it shocking it putting the right chemicals I’ve skimmed it and vaccines many times but it’s still all the way clear.
Not sure--maybe take it back to square one and redo everything--you might have missed something along the way.
Did you get it figured out?
Did you ever try 3d printing an impeller? I know reverse engineering can be a little tricky.
Good question: I did think initially think that-- I have Fusion360 and an Ender 3D printer, but then I thought, "Let's make a Sand Filter set up video instead!" 😂
I thought you were supposed to keep the cap on when back washing for 5 minutes then take it off when you switch it to rinse to rinse the dirty water out after the back wash 🤨
What setting do you use when you are vacuuming out algae?
I don't usually change the setting when I'm vacuuming algae as it doesn't usually drop lower than the intake hose ports.
What if the pressure is 0.2?
It's possible that you have something that is loose that isn't allowing it to come up to a higher pressure. Maybe try tightening some of the fittings, or screwing the top part down a little bit more so the gasket can seal better.
Did you get this problem fixed? I’m having the same problem…..everything seems right but my pressure won’t get on 0.2.
@@brandygaddy7429 I know it's quite old video, but i got similiar problem. Solution is simple - ideal pressure is under 0.25. Here is part of the text from original sandfilter notes - "Generally, the recommended sand filter pressure is less than 0.25 Bar (3.5 PSI) when it is running.". So don't worry, everythin works fine.
@@S4m0s oh ok! Awesome! Thank you so much!