wow - people are so disrespectful - so what he made a mistake and said "ipad" I THANK you for your time and knowledge - would not have a clue how to do this myself and appreciate it.
I was inspired by your video to give it a try. I have the old screen off. What a hassle and pain in the ass. I cut myself twice on the glass shards. Anyway, I decided to try to remove the old screen before buying a new one. That way if it went poorly I wouldn't have a new screen for a broken surface and secondly now I can see all the numbers on the back to make sure I buy the right one. Wish me luck on phase 2. Great video.
So I just finished removing my broken screen and here’s what I’d add. Try to drain the battery before starting if your worried about the heat. Use a heating pad along with the heat gun (I didn’t have to use the heat gun much because the heating pad keep the temp of my screen at 120 degrees). When you get to the last side (top), use a heat gun while prying the screen from the bottom. You can only pry it so much because the ribbon cables are still attached but it will definitely help loosen the adhesive. Then just use a flat plastic pick for the rest of the adhesive. You won’t damaged the antenna this way.
You missed to mentioned an important part. In the top side where the camera is, there are 2 wifi antennas you may cut if you are not careful. I did unfortunately and now I have to use an USB wifi adapter.....
Hi, I'm planning to do this but I'm really nervous about the wifi antennas. Is there a way to know where they are exactly so I can avoid them while prying the screen out?
NikeySunfire yep I did this too! Not sure if I should buy a cheap antenna of ebay or buy adapter. My surface was a mess. battery acid leaking, had to buy new battery, new lcd cable and screen.
Hi there. Thanks for the videos! I have an Acer Switch SW512-52. The 12-inch screen has cracked. Where may I purchase the screen to replace myself? Do you have an Acer Switch Replacement Glass?
Seems like it ended a little abruptly. What about the procedure for gluing the new screen back on? Do you just place the new screen on and reheat the glue?
you don't glue it on you use double sided adhesive like 3m brand the one that is made specifically for devices and you place the screen on and to be sure it'll stay you can heat it up for a bit with the heat gun let it cool down and then you're all good to go I don't know why this guy didn't add any more adhesive seems like he's a cheap repair guy that doesn't care about his customers and just wants to get everything done as quick as possible but new adhesive should always be added and you should try to remove the old one the best you can because it might cause little bumps underneath the digitizer if you don't
Hi, my glue did not stay intact as well as yours when I removed the screen. I need to re-add the glue. Which glue do you recommend? This is my first time repairing a tablet. Thank you.
Tesla tape 61395 use along top and bottom and weaker tape on sides Tesla tape is what’s used to install the screen at factory its glue tape not just pure glue as that would run into the motherboard! Never use a liquid glue that’s v confusing I feel always use Tesla tape. It’s glue
Thanks for the video, it was good information. My surface pro 3 has a broken screen, there was a small crack at the right corner side, hair line cracks started appearing all over the screen soon afterwards. Now I have several cracks running across the screen. I use the surface pro for travel, do you think it wise to carry it around, I mean from reliability point of view (my work involves lot of travel) ? Also is it possible to upgrade the SSD and change the wifi/bluetooth card while replacing the screen ? Cause the pro has defective wifi and bluetooth, also I want to upgrade to a 256 GB SSD instead of the present 64 GB. Another question will an external monitor work even if the surface pro 3 screen conks out ??
One crucial point when working with electrical devices you need to disconnect the battery first, the battery was connected the entire time. That should be the first thing you should do, correct that issue and this will be a great video.
Many Thanks for this video. at the end of the video, how should we glue the new screen to the surface? should we use a special kind of glue for this purpose?
Does the scree/lcd include the digitizer with it? If i were to buy a new lcd online would it also include the "Digitizer" inside/with it? or would i need to buy that completely separately
hi, mi surface its works almost all, but with a cracked near windows logo, than now didnt works the touchscreen, has a way to solve only this problem or i have to change all display?
was the tablet still responsive to touch after the LCD was replaced? please reply...planning to do this to mine as the tablet is till responsive to touch on half of the screen (the half of the screen that is not cracked) thank you
when the glass was broken, the touch was working in some part? mine is broken and the touch works in 30% of screen.... is it expensive to fix mine? is a pro 3 too
My screen chipped a little and it caused a split crack through my screen which doesn't allow me to type or lift my log in screen, will I need an LCD replacement for that? It turns on and everything but touch doesn't work well
I have a surface pro 3 and it still works and everything but the screen broke and the touchscreen doesn’t work… would replacing the scream fix that problem?
I found this online and there are verified purchase reviews that seem to be good and it's pretty cheap compared to most other options www.ebay.com/itm/Microsoft-Surface-Pro-3-1631-Touch-digitizer-lcd-display-Assembly-V1-1-2160-1440-/361366745867
I have a Surface 3 (not a pro) and the screen is cracked. I can still use it with a keyboard, but the touchscreen doesn't work (so it basically functions like a regular laptop). Will replacing the screen fix that? Or is it something more?
idk about rplacing the screen but know that if you download a panel calibration tool it would calibrate your screen and then it will work with toucth again
I just got off the phone with Microsoft support. They won't repair mine but will replace the entire device for $450. Sounds like a better deal than trying to replace the screen. The process looks really difficult even for the pros.
Yeah I don't think they replace screens. That's why they just give you a new one for $450. You should try it yourself they have screens for around $240 on eBay.
pls pls emergency help ..my sp3 lcd broken but still work without touch .. i want buy new screen from amazon but dont know what model i need to buy ..could u help to choose wright lcd screen pls .. waiting ur reply
Could someone please help me? I let my Screen beeing replaced and now the touch Screen doesn't work anymore. When I go to device Manager it says that the Surface touch Controller Firmware could'nt be started, I have to restart the device. Then I restarted it and it still says the same... I've also tried to reset my Surface but then an error message appeared. (Surface 3)
Incredibly helpful video, much appreciated! Broke mine and did not have a clue how to fix it. This was exactly what I needed to see, many thanks!!
wow - people are so disrespectful - so what he made a mistake and said "ipad"
I THANK you for your time and knowledge - would not have a clue how to do this myself and appreciate it.
Disregarding all his verbal mistakes, he make even worse physical repair mistakes... It's not disrespectful to point out something incorrect.
Regardless of the mistake, they are just triggered because he made an awesome vid. just gave him a like!
I was inspired by your video to give it a try. I have the old screen off. What a hassle and pain in the ass. I cut myself twice on the glass shards. Anyway, I decided to try to remove the old screen before buying a new one. That way if it went poorly I wouldn't have a new screen for a broken surface and secondly now I can see all the numbers on the back to make sure I buy the right one. Wish me luck on phase 2. Great video.
you are a G thankyou for the straight forward advice puttin microsoft to shame out here
It's such a simple repair! Sweet!
Would it be an iPad or a surface, he made me so confident that I fixed my surface myself.
And to all blabbers, stop yelling bs. And respect him.
So I just finished removing my broken screen and here’s what I’d add. Try to drain the battery before starting if your worried about the heat. Use a heating pad along with the heat gun (I didn’t have to use the heat gun much because the heating pad keep the temp of my screen at 120 degrees). When you get to the last side (top), use a heat gun while prying the screen from the bottom. You can only pry it so much because the ribbon cables are still attached but it will definitely help loosen the adhesive. Then just use a flat plastic pick for the rest of the adhesive. You won’t damaged the antenna this way.
Hi, good video thank you!
Highly recommend you to wear glasses to save your eyes, when working with smashed glass. I had a bad experience....
You missed to mentioned an important part. In the top side where the camera is, there are 2 wifi antennas you may cut if you are not careful. I did unfortunately and now I have to use an USB wifi adapter.....
Hi, I'm planning to do this but I'm really nervous about the wifi antennas. Is there a way to know where they are exactly so I can avoid them while prying the screen out?
NikeySunfire haha
NikeySunfire yep I did this too! Not sure if I should buy a cheap antenna of ebay or buy adapter. My surface was a mess. battery acid leaking, had to buy new battery, new lcd cable and screen.
Thanks for the iPad screen replacement tutorial. Lol, joking....this helped out a lot. I’m more confident in performing this surgery on my Surface.
Great video! But where do you get the new screen and adhesive?
youre a genius.
Thanks. I did watch other videos to get other ideas.
great help
Thanks it's help alot
Thanks for your teachings
Great vid, the screen is not available on Amazon, do you know where i can get the screen, thanks.
Omg👍👍👍👍 best replacement ever
OMG THANK YOU FOR THIS VIDEO!!!
you're a genius.
Cool video bro. I like the amazon link as well. Good work. Keep in up.
Hi there. Thanks for the videos! I have an Acer Switch SW512-52. The 12-inch screen has cracked. Where may I purchase the screen to replace myself? Do you have an Acer Switch Replacement Glass?
1) Do you have a suggestion for the best place to buy a replacement screen?
2) What kind of adhesive are you using?
dude your awesome!
Seems like it ended a little abruptly. What about the procedure for gluing the new screen back on? Do you just place the new screen on and reheat the glue?
you don't glue it on you use double sided adhesive like 3m brand the one that is made specifically for devices and you place the screen on and to be sure it'll stay you can heat it up for a bit with the heat gun let it cool down and then you're all good to go I don't know why this guy didn't add any more adhesive seems like he's a cheap repair guy that doesn't care about his customers and just wants to get everything done as quick as possible but new adhesive should always be added and you should try to remove the old one the best you can because it might cause little bumps underneath the digitizer if you don't
Hi, my glue did not stay intact as well as yours when I removed the screen. I need to re-add the glue. Which glue do you recommend? This is my first time repairing a tablet. Thank you.
adhesive tape
Tesla tape 61395 use along top and bottom and weaker tape on sides Tesla tape is what’s used to install the screen at factory its glue tape not just pure glue as that would run into the motherboard! Never use a liquid glue that’s v confusing I feel always use Tesla tape. It’s glue
Thanks for the video, it was good information. My surface pro 3 has a broken screen, there was a small crack at the right corner side, hair line cracks started appearing all over the screen soon afterwards. Now I have several cracks running across the screen.
I use the surface pro for travel, do you think it wise to carry it around, I mean from reliability point of view (my work involves lot of travel) ?
Also is it possible to upgrade the SSD and change the wifi/bluetooth card while replacing the screen ? Cause the pro has defective wifi and bluetooth, also I want to upgrade to a 256 GB SSD instead of the present 64 GB.
Another question will an external monitor work even if the surface pro 3 screen conks out ??
Great video
good job! One question: Where could I buy one such LCD, too?
replaced the whole thing, the LED panel still working, right? why did change the outside glass only?
before doing anything disconnect the battery
did the touch work?
Big question here
ser süper danke inerhandy
where did you get the screen? My screen is cracked and my touch screen on my pro 3 doesn't work/ trying to find the cheapest way to get it done
Always Real mine cracked while I was sleeping. No one touched it. Just a crack across the screen
same lmfao, it just cracked out of nowhere, must have been a stress fracture.
eBay.
Michael George Wahhab shut up
8:00 he called it an iPad. Way more powerful than that iPad you thing
I try to put the screen back on but a red light comes on, did I put in the wrong wire?
Hey i was wondering where can i buy a screen that you have?
eBay. There's always a few for sale.
I sell this kind of screen.Add my email address:18824725026hxdz@gmail.com
I sell this kind of screen.Add my email address:18824725026hxdz@gmail.com
I sell this kind of screen.Add my email address:18824725026hxdz@gmail.com
I sell this kind of screen.Add my email address:18824725026hxdz@gmail.com
Nice camera angle (serious)
Do you not need to disconnect the battery cable ?
One crucial point when working with electrical devices you need to disconnect the battery first, the battery was connected the entire time. That should be the first thing you should do, correct that issue and this will be a great video.
Thank you
Malam Kak.. Saya cari Shield Plate Surface Pro 3... Mungkin ada stock ya
Does the touch function of the screen still work at the beginning?
Maybe some parts of the screen but it might detect random touches
Sorry about the 5 year late reply
Is it possible to remove a screen from a Surface and put it on another Surface? Without breaking it.
Many Thanks for this video. at the end of the video, how should we glue the new screen to the surface? should we use a special kind of glue for this purpose?
Adhesive tape is good.
www.ebay.com.au/itm/272354886901?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT
where can I order a screen from?
Is it possible to replace the glas only ?
Does the scree/lcd include the digitizer with it?
If i were to buy a new lcd online would it also include the "Digitizer" inside/with it? or would i need to buy that completely separately
Hi. How to know if the screen is for 1631 or 1645? .. how can i see the model of my Surface Pro 3?
Where can I purchase the screen?
hi, mi surface its works almost all, but with a cracked near windows logo, than now didnt works the touchscreen, has a way to solve only this problem or i have to change all display?
was the tablet still responsive to touch after the LCD was replaced? please reply...planning to do this to mine as the tablet is till responsive to touch on half of the screen (the half of the screen that is not cracked)
thank you
can we replace just the glass ??
what adhesive should I use in case there's no adhesive left?
Is there a way to just replace the glass? My digitizer is working just cracked glass
Sorry guys but when your going to put the new one on. Do you have to add some kind of glue? thank you!
I would like to see if i can replace it by Surface Pro 4 Screen :D
when the glass was broken, the touch was working in some part? mine is broken and the touch works in 30% of screen.... is it expensive to fix mine? is a pro 3 too
My screen chipped a little and it caused a split crack through my screen which doesn't allow me to type or lift my log in screen, will I need an LCD replacement for that? It turns on and everything but touch doesn't work well
sorry to sound daft but wont a uv do the job of a heat gun?
where do i get a screen for a surface 3? i have the exact crack!!
Hi where can I find the screen?
hello, where can I get repair my surface pro 3 screen from you? and how much will it cost?
what about the Microsoft Surface Pro 4?
where would one get new adhesive? does it come with the display?
Is there any way to find out what model the screen is? I've got the i7 256 version and I've found different models don't know which one is gonna work
Do you heat it up again to set the new screen?
I have a surface pro 3 and it still works and everything but the screen broke and the touchscreen doesn’t work… would replacing the scream fix that problem?
Yes
Is it a Surface Pr 3 or an iPad? 8:00
omg it's a tongue slip while he expertly repaired a surface pro 3 (one of the most difficult tablets to fix). get the math over it
I have mines damage in the black edge, how much its going to cost fix that? and where I could get a screen? or professional place in the UK
thanks
what parts do i need to buy to get mine fixed? I have the surface pro 3 with cracked screen and unresponsive touch screen
how much the new screen for Microsoft surface 4
It would be nice to have audio.
I'd like to see the screen opened to change the SSD (without damaging screen)
There is no ssd. Theres just an intigrated chip. The only way to expand memory is to add a sd.
hi, how did you find the right screen for your pro 3?
Is it possible to replace surface pro 1796 with the surface pro 4 screen? My surface pro 1796 screen is broken, and I have unused surface pro 4.
Where do you get the screen? I see others have asked the same thing but no response
what is the part number for the lcd screen and the digitizer?
Where did you get the replacement screen? Thanks
www.ebay.com.au/itm/272354886901?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT
I found this online and there are verified purchase reviews that seem to be good and it's pretty cheap compared to most other options
www.ebay.com/itm/Microsoft-Surface-Pro-3-1631-Touch-digitizer-lcd-display-Assembly-V1-1-2160-1440-/361366745867
Does the pen work?
where can we purchase just the screen to replace it ourselves
how do you glue the screen back on? and around how much will the screen alone cost?
ThePineappleEater Tesla tape it’s five six pounds . It’s glue tape that’s shat the factory use in production
I have a Surface 3 (not a pro) and the screen is cracked. I can still use it with a keyboard, but the touchscreen doesn't work (so it basically functions like a regular laptop). Will replacing the screen fix that? Or is it something more?
idk about rplacing the screen but know that if you download a panel calibration tool it would calibrate your screen and then it will work with toucth again
What kind of tape you use to bond the glass to body? I cant find.
Will this work for surface pro 2?
I just got off the phone with Microsoft support. They won't repair mine but will replace the entire device for $450. Sounds like a better deal than trying to replace the screen. The process looks really difficult even for the pros.
Yeah I don't think they replace screens. That's why they just give you a new one for $450. You should try it yourself they have screens for around $240 on eBay.
How much would it be to repair it?
pls pls emergency help ..my sp3 lcd broken but still work without touch .. i want buy new screen from amazon but dont know what model i need to buy ..could u help to choose wright lcd screen pls .. waiting ur reply
Hello , Dear i just wan to buy the touch screen for microsoft surface tab 3 where can i find it ?
Hey, where did you get the replacement screen?
Hi mate, what heat did you have the heat gun set at?
And what do you charge for similar repair ?
where did u get the screen and how much was it
Could someone please help me? I let my Screen beeing replaced and now the touch Screen doesn't work anymore. When I go to device Manager it says that the Surface touch Controller Firmware could'nt be started, I have to restart the device. Then I restarted it and it still says the same... I've also tried to reset my Surface but then an error message appeared. (Surface 3)
so if I bought one meant for the 1 model it was still fit?!?
where did you get your surface pro 3 lcd and digitizer can you find one for cheaper than 300
where can i buy the replacement screen for this online?
Where did you buy the screen from?
Is it the same for surcafe 3?
Where'd you get the new screen?