RC Mini Delta Wing Step By Step build
HTML-код
- Опубликовано: 11 сен 2024
- To see this plane fly go here: • 3ch Scratch Built Mini...
This is a step by step build video for a fun and challenging high performance mini delta wing. It has nearly unlimited vertical and can roll and flip very fast. The video thoroughly details the entire build process including the materials and measurements. I will be including a bill of materials and a list of where I bought the parts and materials. I can also provide drawings and CAD files.
ขอบคุณมากครับกับสาระเรื่องราวดีๆ
Nice build video, thanks for sharing
Excellent video, thanks for sharing
Can't be any better.really good guide.
Very well done. good clear and precise instructions. thanks for sharing
Nice Plane, you must be a engineer, because you really over built it!!! Can you say, bullet proof! Lol!!! KEEP EM COMING, you do awesome work!!! ........... Peace!!!
agreed totally over engineered !
Thanks for your precious information, I have 1 question. The total length is 17" and the tail is 8.4" per side; as you said, so logically it gonna be more than the actual wing width, Could it be to my miss understanding!!! Regards
great video!! :-) .... it would be easier if you had given the measurements in millimeters... far more precise for such applications
Could someone give me links to compatable parts for this ? I am brand new, I have built the design and just need the parts. Links for the motor, servos etc.
HobbyKing is your best bet. Just about any 5g servo will work. You could maybe use a 3.7g. if you go to 0:42 on the video you can pretty much find everything you need if you look for those parts in hobbyking's website.
thanks your are best
How do you get the cg.?
Sir what we do for cancel opposite torque of motor in pusher type plan?
It is best with your elenvon trim settings.
🎉
Is it possible I could use hot glue instead?
And do you have any plans for this plane?
You can but be very frugal with it as it becomes heavy quickly. Think of it this way, put the gluestick on a scale and then consider how much of that stick goes into that plane.
Where is aerofoil profile of this delta wing.
COOL.
Edit: I am using a 5x4.5 prop.
very very nice technology
where is the cg mark
Rondo Schiavoni roughly 220mm from the nose or about half from nose to tail.
about 8- 13/16th
How to connect mix of aileron and elevator to the transmitter please explain ?
Most radios have a channel mixer. What I do is connect one to the Aileron channel and another to the Elevator channel. Then I add a 100% of elevator on the Aileron and a 100% mix of Aileron to the elevator. That way they both move for any input. When you pull up you should see both elevons point up and down when pushed down on the stick. Then when you roll left you should see the left elevon (when looking in the direction of flight) point up and the right elevon should point down. When you roll right you should see the same.
Hey! Could you please provide CAD files, that would be really helpful
Cad files?
I am just curious, but which state that was a part of the "South" in the "War of Northern Aggression", (a.k.a. The Civil War), are you from?
Raycefan The state that started it; South Carolina of course.
jjmonns awesome. I lived in Charleston for a long time. Thought I recognized that accent.
Sir, where is the CG...............?
Good video.i want to buy its remot and other parts pleace help me .Thanks
Flight video?
hey, can you tel me where you buy your parts for this plane, and if is possible the links ???thanj you and very good job
(I would like build this plane ar home for my first plane rc ) it's possible withs flysky command
HobbyKIng is the best place I have found. You can buy everything I am using also on ebay or other retailers.
Sir can you please suggest me some good article or web so I can understand more some about comparative ratios of angles and tip cord, wingspan, size of rudder etc. So i can choose proper ratios with weight of plane and speed requirement of plane etc.
Please . . . !
Calculate your wing area and ensure that you are about 1/4 to 1/3 behind the center of gravity to make the nose heavier than the tail. As far as calculation for weight and speed and so on what you want to research is wing loading and power to weight. Generally speaking, faster planes have a higher wing loading while more easier flying planes will have a lower wing loading. For smaller craft a minimum of 1:1 power to weight ration is recommended. As you go larger you can have less power to weight. Everything I have has at least a 1:1 with the exception of my big 8' wingspan plane.
Could you send me the cad files John Lochner
Thank you this is really useful! And please provide CAD files.
+Faye Boodi I do not have the website up but for now send me your email through a private message and I will email you the files.
+jjmonns even i need Cad files
Tell Us to setup the controller and its controlls,its confusing me alot,i Like to build this in science exhibition,
You plug one elevon into the aileron channel and the other into the elevator. You mix the elevator with the aileron and the aileron with the elevator. this way both channels respond to both elevator and aileron input.
jjmonns Thanks ,Also To set the reciever to Radio 3 ,Any way or have to buy specific reciever of radio 3 ,im just new in this,i do made a Car but used Hydraulic type of controls with rubberbands and gears,brand new to electricity things
The mixing is done in the transmitter. You will need to ensure that you have a receiver capable of this. You need a receiver that has at least 3 channels. You will need a transmitter that is made for aircraft, a pistol style will not work.
sir I want this plan electric part please my help
Any flight video?
+Tony Arnett Yes I do, I just need to edit it and I will post it soon.
Thanks for flight video link. It looks very agile. The Wing looks great and you did an excellent job. I look forward to more of your videos.
+Tony Arnett I had uploaded the wrong video before (unfinished edit), the correct one is here: ruclips.net/video/0dk2lgGdHAA/видео.html
How much does it cost?
The foam and CF is about $15 worth. The electronics including the RX is about $35
We would love the list of where you bought the parts and materials.
Hobby King for most of the components. Hobby Lobby for the roam board and balsa.
Christine Lewicki
could you post the dimensions of the plane? I plan to scale it to a larger version
I give all the dimensions in the video. When I run across the source material (I am in the middle of archiving) I will do an overlay of all the major dimensions at once.
Amin
Ma vola?😁
send pdf plese
COG
It is just a bit forward of the spar.
ruclips.net/video/0dk2lgGdHAA/видео.html Shows the center of gravity.
Seriously? No flight footage???
Raycefan there is a link in the description.
hi please send plan ..thanxxx
Good video.i want to buy its remot and other parts pleace help me .Thanks
Flysky radio. For $50.00. And prop esc servos and motor for $20.00. All on Amazon....
My sample
My delta wing
ruclips.net/video/3DFgH7Bn2ZE/видео.html
✌