DIY Incremental Circle Jig for Band Saw & Router Table
HTML-код
- Опубликовано: 30 янв 2023
- This innovative DIY incremental circle jig will allow you to cut circles safely and precisely on a band saw or router table.
It will be perfect to make pulleys or wheels for homemade tools or for any other project where you need round pieces of a relatively small diameter.
DIY Incremental Circle Jig Plans: bit.ly/3HGTwCl
Circle Jig Playlist: bit.ly/3YmUWYD
Blog Article: bit.ly/3HI2kYA
Where to obtain materials and tools that I use:
Mobile Workbench Plans: bit.ly/3iRfbd9
Multi-Function Workbench Plans: bit.ly/39eKtrr
Band Saw Plans: bit.ly/2JisRjf
Workbench Accessories: bit.ly/2OSNcKu
Follow:
/ paosonwoodwork
/ paoson_woodworking
/ paoson_woodworking
#woodworking #circlejig #bandsaw #routertable 
Хобби
DIY Incremental Circle Jig Plans: bit.ly/3HGTwCl
The best circle jig so far!
Everything this guy makes is just.... So crispy and clean. My kind.
I really like how you marked the screw with numbers so you know how far you have turned it. Great idea.
This looks great, clean cuts as well and looks steadier than what I have used many times in the past
Excellent tool. Cutting straight and corners is one thing but circles is a challenge with other setups. This would simplify some of them. I love it already ☺️
Έκανες καταπληκτική δουλειά και πάλι, συγχαρητήρια!!!!
Yet another genius project! !! !!!
Excellent!! This appears much safer and a great deal more precise for cutting circles. Can't wait for the next videos showing the jig in action and how it's built.
thanks Mike!
You have given me "The Guilts" again! A couple of years back I made a trial version of a similar jig... I never did make the finished version.
One feature I added was an adjustable stop that contacted the edge of the bandsaw table when the workpiece was in the correct position to begin rotating it. It performed the same function as the T-slot stop in your design, but because it is part of the jig, it retains it's correct setting and does not require adjusting every time the jig is used. Should I ever make the final version, this stop would be retractable to allow use on my router table; as it is now I have to unscrew it, and it loses it's accuracy.
I envy the stunning finishes you achieve. Using your creations to make more creations must be immensly satisfying. 😃 Thank's again for sharing them with us all.
thanks for sharing your experience Pete!
You always leave me speechless with what you are capable of doing. Greetings from Caracas/Venezuela
Well, another super-duper precision jig. As always, your work is impeccable. To me, it looks like you are setting up for a large build of some sort by making this jig. Hoping to see a mega-project soon!
Very nice. I bought the MicroJig Dovetail clamps and am going to incorporate them into several jigs I need to build. Good work.
Once again you have astounded me with your ingenuity.
thanks!
Awesome! Thank you for the video!
wow, amazing results
An outstanding jig. Good job!
Thank you very much!
What a great idea!
Beautiful and smart design 👍
Well hello good sir. Love your stuff. About to build 2 small modular benches and the large tablesaw workbench. Looking forward to it
thanks! send me some photo please
I am inspired by your skill and ingenuity!
thanks!
Very Nice Paoson, I wish I had something like that 40 years ago when I was refinishing table tops
Thanks 👍
Eres un genio Sizu! Abrazo desde Argentina!
❤🔥❤🔥❤🔥
Genial como siempre Paoson, gracias por el video.
gracias a ti por comentar siempre Angel!
This is excellent! Much better than the scrap efforts I’ve ever made. Looks like I need to get some T track 😂
Great idea. I will try to make a similar one.
Very useful jig.
Great video of the bandsaw / router jig Suso! Thank you for always sharing with us!💖👍😎JP
Nice work as usual. We shared this video on our homemade tools forum this week 😎
The headless bolts, are called Alan Screws Pao. As always good seeing your work!
Awesome great Job. 👍🏻💪🏻🙋♂️
Thanks 👍
Que pasada de util, me parece super paractico para cualquier carpinteria, eres un genio de verdad, un saludo y muchas gracias por el contenido que tienes.
Un abrazo🤗
gracias como siempre compañero!
This is great! I made a really rudimentary version of a circle jig and used it on my table saw years ago. Needless to say I'm never using that jig again as it was a bit dangerous. This looks much safer! Also, I made a slightly scaled down version of your modular workbench and it turned out great! Thanks for the inspiration!
thanks! I would like to see pics of your workbench
@@Paoson_Woodworking I actually filmed it! ruclips.net/video/MNImyl0IfB0/видео.html
_grandiose as always_
Thanks!
What a brilliant jig, I especially like the various suggestions on how to use it ... fantastic.
Please do not take this as a criticism of your work, as usual the amount of thought and workmanship that goes into your work is readily apparent ... but below I've suggested a method of making an already fantastic jig into something even better 👍
I love the idea of the precision part of the jig, but it makes doing large adjustments (from minimum to maximum size) a complete and utter pain unless you use a drill!
If you had the rotation axis block attached to the end of the threaded rod and a mechanism using a split connector nut, placed on the outer edge of the jig, then you could ...
- 1) disengage the nut so that the threaded rod (and the rotation axis block) could be moved in/out to the rough position quickly and easily
- 2) engage the nut so that the threaded rod can be used for fine adjustment adjustment as per your design
Only downside with my suggestion is that the rod would stick out more and more as you increase the radius of the part being worked on!
Excelente
Jig Master!
Nice making
genio 🙌
SUPER
That's pretty cool! I would still be afraid of it catching and coming off the pin while routing. What about an adjustable "roller" clamp somewhere on the track/jig? Something to apply medium pressure and keep the work piece a bit more "stable." Just a thought.
I still think it is a very good idea!
thanks! I thought about that! If you are going to make the circular piece on the router table then I think it would be necessary. But if you first use the band saw and you are only going to mill about 2 or 3mm I think it is not necessary.
@@Paoson_Woodworking Good example. That completely makes sense. If you are only taking off a very small amount of material, that risk is also very minimal.
Thanks for "reminding" me of that!
Normally hand pressure would be enough, but a few sandbags would be a good idea in case you need to let go. I don't know that a rolling wheel would be any safer.
Nice 👍👏👏👏🤜🤛
Damn! That looks like the Millenium Falcon!
super 💪🔥👌👍.
Could this still be done using regular t track nut, or you really need to machine it like you did?
You could add a tape next to the rod to give you a quick guide to circle centre.
it's a good idea, thanks!
Another outstanding tool design and execution. Thank you. One thing you did not show clearly was retracting the work piece when you have completed the operation (i.e. away from the router bit/saw blade.) I assume it involves releasing the clamp and pulling the piece back?
hi Clyde, you just have to turn the threaded rod in the opposite direction, it is very easy and comfortable!
You use a lot of baltic birch in your projects. Given how hard it is to get and how pricey it has become this last year, do you have any alternatives to baltic birch you can recommend?
pine plywood, or poplar plywood
Wow, such a nice project.
Hey have a suggestion here, can't you challenge us and make a compound sliding mitre saw, I've never seen anyone done such
Thanks for the idea!
I know you can't fail making it since you've made that extremely difficult x-motion mortiser which even uses a relatively small parts that are not that easy to work with.
The miter saws we see here are for people who are lefthanded and hence are not safe for the right-handed ones. That happens because they use angle grinders and circular saws and their motor are not meant for cutting on the cutter's direction and it's difficult for them to reverse the motor
Merhaba
Biraz benim videom dan kopya var sanki. Yinede iyi olmuş
L I K E 👍👍👍 👍👍😻😻😻 😻😻💯💯💯💯💯
Dang, that thumbnail promised you building a Millennium Falcon.
I'm only here to leave this comment about the thumbnail:
"You came in that thing? You're braver than I thought"
Would be nice without drilling a hole in the middle of the round 😢
in the next video!
You're cutting the wrong way on the router ,rotation should be against cutter rotation