⚠️ Please Read ⚠️ The drill bit size listed in the video is extremely inaccurate! If you use a 3/8 bit, the bolts will just fall right through the hole and you fucked up your car. I started with 7/64, then 11/64, then 15/64 for the final hole size. 3/8 is the size of the nut, not the bolt size. Otherwise, so far the wing is great. Its not an exact replica to the Type R, but its pretty close. Its a little smaller but fits properly on an fk7.
I don't know if you notice, but in the video at 0:39 you say to attach both stands onto both side winglets with bolt #1(the short bolt), but then you go ahead and attach them with the bolt #2(the long bolt) on the video. Then at 4:30 you say to secure the spoiler in place with bolt #2 (the long bolt), but then you go ahead and use bolt #1 instead in the video. So then which are the right instructions?
Hi thanks for asking. We made a mistake on the description, you will need to attach both stands onto both side winglets with bolt #1(the short bolt) & secure the spoiler in place with bolt #2 (the long bolt)
All of our Honda Civic FK4 FK7 Hatchback Spoiler Will come with Drilling Template. We are not sure on others' brand as the design are all different out there
That’s because these aren’t that good, if you want a legitimate type r replica wing buy one from abs dynamics, I have this one and it fits perfectly, not too small and cheap like this one
Where can we get the template?can i ask a favor if you can send me a template for this type r spoiler?coz my spoiler is the same as this one..thank you in advance...
@@extremeonlinestore well I just need the template the one I bought didn’t come with one I didn’t buy it from y’all was just wondering if y’all can email me one so I can just print it out for the spoiler
thanks, good job on getting those holes cleanly drilled.
Do you not have any problems with vibrations? I seen you didn’t use weather stripping, a lot people recommend that.
⚠️ Please Read ⚠️
The drill bit size listed in the video is extremely inaccurate! If you use a 3/8 bit, the bolts will just fall right through the hole and you fucked up your car.
I started with 7/64, then 11/64, then 15/64 for the final hole size. 3/8 is the size of the nut, not the bolt size.
Otherwise, so far the wing is great. Its not an exact replica to the Type R, but its pretty close. Its a little smaller but fits properly on an fk7.
Thanks tor the info. Ill be referring back to this for my installation
I don't know if you notice, but in the video at 0:39 you say to attach both stands onto both side winglets with bolt #1(the short bolt), but then you go ahead and attach them with the bolt #2(the long bolt) on the video. Then at 4:30 you say to secure the spoiler in place with bolt #2 (the long bolt), but then you go ahead and use bolt #1 instead in the video. So then which are the right instructions?
Hi thanks for asking. We made a mistake on the description, you will need to attach both stands onto both side winglets with bolt #1(the short bolt) & secure the spoiler in place with bolt #2 (the long bolt)
People buying these undersized wings, the side wing parts are supposed to overlap the line of the hatch a bit.
What wing brand would you recommend?
@@rozer95 absdynamics has a full size type r replica
@@d3lgo674cost a arm and a leg
@@gosulanre6669 facts, looks better tho, most of the ones on Amazon and ebay looks considerably smaller
Hi! Can you provide a link to downloan that exact template that would be gret!
Does this thing fit on a 2018 honda civic hatchback lx?
How much did you pay for the paint job on the wing
Question, why did you drill.out the holes.on the screw holes? Is it make sure the screw goes in deeper?
Correct
@@TheKJRA but when u do.that doesnt it weaken the housing of the bolts?
How hard is it to give a printable template when you have so many people asking
For one.
We do include drilling template as shown in the video
What if it didn’t come with a drilling template? Could it be drilled from the inside?
All of our Honda Civic FK4 FK7 Hatchback Spoiler Will come with Drilling Template. We are not sure on others' brand as the design are all different out there
I didn’t get one either bought from you guys too!!!
Whats the size the flex head ratchet wrench to tighten the wing?
Where did u get the paper
Will this fit on 2013 Corolla I really tryna get a spoiler like that
Unfortunately no. This will not fit on a 2013 Toyota Corolla
Hi please can you share the template I had bought the JDM primer black type r spoiler from you on eBay however I am unable to find the template
template did you find i need tooo
@@GaryGaritoMoore yes I did only the left side so I had flipped for the right , I sold my honda with a type r wing now
I was gonna get this, nvm I’m not drilling into my car 😂
Bruh
does this spoiler fit 2019 civic hatchback sport?
Yes this will
Hello pls where can I get the template paper pls ?? Thanks alot
Where did you get the sheets that you used to drill. ?
Package will come with drilling template
No it doesn’t and I’m not the only one who didn’t get it either
I got mine so it’s unfortunate you didn’t get the templates. I’m sorry to hear that
Either i,didnt get the template too...
@@sunnyd9830 is there anyway you can send the template sir to us?thank you in advance..
How much did you pay for the paint job
Hello friend, how are you? I need a wing template. Can you help me please?
We could email it to you. Please reach us out at khtkeith@extremeonlinestore.com
looks great !! do you think it can be used on Jetta 1.8 SE 2014. ! always liked that mutant look the wing gives.! fantastic.
my wing seems way too small? What does this mean?
Sorry about your wang, bro.
That’s because these aren’t that good, if you want a legitimate type r replica wing buy one from abs dynamics, I have this one and it fits perfectly, not too small and cheap like this one
can we request for a painted one? I'm willing to pay extra
Do u have the link for the spoiler please and cost?
www.ebay.com/itm/323546598401. Selling price will be $169.98
Please can you share the template
Where can i get the template? Please
Where can we get the template?can i ask a favor if you can send me a template for this type r spoiler?coz my spoiler is the same as this one..thank you in advance...
Did you get the template
@@ajaro_ nope...i just did my own without template...it goes well..
@@Kevin-st9dmhow’s it holding up? Did you use foam?
Wao great job nice car
Do you have the paint kit for the wing also?
Yes, we do have the painted glossy black available now
@@extremeonlinestore link to glossy black? Plz
@@venometics www.ebay.com/itm/324978590186
This replica wing is a bit smaller. I think there's a full size one and that should give a more proportional look. Otherwise good job
Can you send me the template ?
I need the template too
Hey where did u get that template buddy
Its included in the package
@@extremeonlinestore well I just need the template the one I bought didn’t come with one I didn’t buy it from y’all was just wondering if y’all can email me one so I can just print it out for the spoiler
@@Texasgaragejunkie did you end up with one?
Can I get a template please
Please contact us at customerservice@extremeonlinestore.com
can you link the papers with sketch?
Do you have already the template?
トソーしないと…😑