@@Roundhead75 I have the Lian Li O11D Evo XL already decked out with a total of twelve 140mm fans and two 120mm fans. It would make little sense for me to downgrade and get a smaller AIO with smaller fans. Even a new Lian Li 420mm AIO with the cables routed through the tubing like Corsair's Link AIO's with thicker rads like the Arctic Liquid Freeze AIO's for better cooling would work. Some 420mm product, as people like me with such builds, again, just cannot completely change everything and downgrade for no reason.
You are able to swap the fans on the AIO with virtually any fan (assuming it's the correct size), I highly doubt we will see a uni-fan variant of this, at least until we see uni-fan v3s!
Can this installation be smooth in Dan a3, was wondering if the tube pump can come out from the right too. In the A3 matx and similar cases, MBD vrm may interfere
@LianLi By chance will you you be making a model that has black blades? I prefer the black blades with the black option. Doing white blades in the black option doesn’t seem to make sense to me
Podoba mi się fajne AIO w końcu coś próbują z tymi rurkami zrobić żeby jakoś to wyglądało i fajne wentylatory z tymi skosami podświetlanymi ogólnie spoko pozdrawiam
Add that to case and motherboard manufacturers as well, as it won't work with my motherboard and case. There's not enough room for the tubing to pass the choke/mosfet heatsink.
Just found out that the tubes don't necessarily come through the top of the CPU , which is a plus. The tube can come through the right of a motherboard too. Was worried this can't be installed in compact matx cases (A3 matx)
You still haven't made a 4 point bracket for the OG Galahad available on AM4/5. Make this available with no screen, and I'll consider it as long as it has the 4 point mounting bracket.
Can you guys make a V2 of the NON LCD TL fans putting something nice on the center hub like the SL V2? The current TL fan's naked hub ruins aesthetics.
@@ninjadropzzz1204 hoses on top have to come straight out and down over the board. 90 elbows point the hoses the wrong way. I just finished building mine. The older Lian in coolers work fine. Jay2cent did a pretty quick build and I liked it ordered it then realized my older 280 wouldn't work and had to order another 360 with straight hose fittings
@@zaso0214 0:18 Cold water should go in the middle then spread around and the hot water exit on the side, but in the video they show the opposite, maybe its a mistake
English: Expecting it to be available from retailers at the same time as the release of the product video is a bit outrageous. You have to be a little patient. I'm sure it will definitely be available in Germany too! Deutsch : Das gleichzeitig mit dem release des Produktvideo bei Händlern als lieferbar zu erwarten ist auch unverschämt. Da muss man mal etwas geduld haben. Bin mir ziemlich sicher das kommt garantiert auch so zu uns nach Deutschland !
Utter nonsense … why thumbs down … its a product video announcing it … of course its not available … use some common sense … to expect it being available immediately and give a thumbs down is rude and illogical!
420mm version and I'm sold
Same bro, same
You need 140mm of space for the 120mm fans to tuck the tube behind , so you need 160mm space for 140mm of space if they made a 420 version.
@@Roundhead75 I have the Lian Li O11D Evo XL already decked out with a total of twelve 140mm fans and two 120mm fans. It would make little sense for me to downgrade and get a smaller AIO with smaller fans. Even a new Lian Li 420mm AIO with the cables routed through the tubing like Corsair's Link AIO's with thicker rads like the Arctic Liquid Freeze AIO's for better cooling would work. Some 420mm product, as people like me with such builds, again, just cannot completely change everything and downgrade for no reason.
@@Roundhead75 I have a coolermaster haf Berserker. I got plenty of space
@@Walm89Hi, I'm also planning on the same case Evo d XL, can you suggest the best 420mm aio for that case?
Definitely will be in my next build.
These AIO's are beautiful wow!
is there plans for infinity fan verson or can they be swapped with them
You are able to swap the fans on the AIO with virtually any fan (assuming it's the correct size), I highly doubt we will see a uni-fan variant of this, at least until we see uni-fan v3s!
My build in the o11 d rgb is gonna look even better now
what is the difference as compared to GA II LCD series? Which one is better?
Can this installation be smooth in Dan a3, was wondering if the tube pump can come out from the right too. In the A3 matx and similar cases, MBD vrm may interfere
Are these defaulted to exhaust or intake fan direction?
@LianLi By chance will you you be making a model that has black blades? I prefer the black blades with the black option. Doing white blades in the black option doesn’t seem to make sense to me
There is a black version available
I already bought mine, perfect time. I was looking for one to replace my Lian Li 240MM
installed ?
When will the updated version of Lian Li O11 Air Mini be released!?
i wonder if this would defeat the minimalist approach on o11 vision since you can’t mount it on top bc it is glass.
Will this work with older sl120/140 v2 fans? I have several in my case and want to know if the hub will work for all of the fans
Can I mount in the traditional way if the tubes doesn't fit in the top of my case?
Woooo can't wait to be in my o11d mini
240/280 coming soon?
will you be selling the fans of the R variant separately, eventually?
Podoba mi się fajne AIO w końcu coś próbują z tymi rurkami zrobić żeby jakoś to wyglądało i fajne wentylatory z tymi skosami podświetlanymi ogólnie spoko pozdrawiam
Do this has 240 as well?
Suport lga 1200?
manufacturers: write that down
Add that to case and motherboard manufacturers as well, as it won't work with my motherboard and case. There's not enough room for the tubing to pass the choke/mosfet heatsink.
@lian li what is the ram always show in your videos specifically this one??
Just found out that the tubes don't necessarily come through the top of the CPU , which is a plus. The tube can come through the right of a motherboard too. Was worried this can't be installed in compact matx cases (A3 matx)
You still haven't made a 4 point bracket for the OG Galahad available on AM4/5. Make this available with no screen, and I'll consider it as long as it has the 4 point mounting bracket.
cuando estara disponible en amazon ?
Hi, do you think this new AIO fits in hyte Y40?
付属の360Rからsl infinity120へと交換したのですが外した360Rファンのコネクタが何にも合わず使えないのが勿体無い。変換ケーブルはないのでしょうか？
水冷ヘッドから出たコネクターも外せず見栄えが悪い
infinity fanに交換した人はいますか？
I need a 240mm version of it to fit it to my Lian Li DK-04 Desk Case :(
Any plans for it?
Can you guys make a V2 of the NON LCD TL fans putting something nice on the center hub like the SL V2? The current TL fan's naked hub ruins aesthetics.
not support Lian Li Vision?
10/10
Lian Li doesn't mention the hz of lcd screen anywhere. Is 30hz or 60hz🤔
Didn't the lian li AiO's all failing from defect pumps?
This with a BTF mobo and GPU would almost entirely eliminate visible cables. Would be super clean.
Are these compatible with infinity fans?
of course!
Is it compatible with 1200 socket?
yes
台灣何時上市
420mm where 😭
Need to normalize making 420 rads and not stopping at 360. Would have gotten it if there was 420
y y’all remove the lights around the lcd, it looked cooler
To everyone seeing this check the description to see where to order
I wonder when other manufacturers will copy this solution like your idea of connecting several fans without wires.
when, when, when😿
this is out for preorder looks like release is 7/16
Please next release edge psu
i would buy it but im broke asf
they supposedly ditched Asetek and replaced it with their own custom made pump
280mm and I'll take one.
니언니 짱
I must be the only person on Earth who looks at the display instead of whether or not I can see my AIO tubes.
What di you mean? Who cares about tube visibility … focus is the display …
Well that was cool till i realized it wont work in the newest lian li SUP01 case 😑
Why won’t it? I was thinking about buying the sup 01 and this cooler too 😢
@@ninjadropzzz1204 hoses on top have to come straight out and down over the board. 90 elbows point the hoses the wrong way. I just finished building mine. The older Lian in coolers work fine. Jay2cent did a pretty quick build and I liked it ordered it then realized my older 280 wouldn't work and had to order another 360 with straight hose fittings
@@misfortune13th so what did you do? You are returning the hydroshift cooler?
@@ninjadropzzz1204 just going to use it in my o11 when i redo it. Im really liking th sup01 more so then the 011
The Hydroshift Series will fit in the SUP01 case once you remove the tube clamps.
The water flow is... wrong ?
How is it wrong?
@@zaso0214 0:18 Cold water should go in the middle then spread around and the hot water exit on the side, but in the video they show the opposite, maybe its a mistake
@@young-j731 water flow is correct lol
@@jasperchou4952 ok
@@young-j731 idk what you are on but it’s right
Waiting in russia
По конской цене. Но я куплю 😂
@@zet85 да вряд ли дороже 35 будет
@@DoubleXShow ты уже пользовался сзо от Лиан Ли, как оно? Я вот думаю подобрать от ASUS
@@zet85 не, первая будет, пока на z73 сижу
THUMBS DOWN! IN GERMANY NOT AVAILABLE. IN GREAT BRITAIN ALSO NOT! 😢
English: Expecting it to be available from retailers at the same time as the release of the product video is a bit outrageous. You have to be a little patient. I'm sure it will definitely be available in Germany too!
Deutsch : Das gleichzeitig mit dem release des Produktvideo bei Händlern als lieferbar zu erwarten ist auch unverschämt. Da muss man mal etwas geduld haben. Bin mir ziemlich sicher das kommt garantiert auch so zu uns nach Deutschland !
Bought and available in Australia
Utter nonsense … why thumbs down … its a product video announcing it … of course its not available … use some common sense … to expect it being available immediately and give a thumbs down is rude and illogical!