Это видео недоступно.
Сожалеем об этом.
#67 HYDRAULIC AUGER ON A TRACTOR.
HTML-код
- Опубликовано: 27 сен 2021
- Today we used the premier attachments H015PD on the Kubota M7060HD12 to set posts for the new horse stalls. The auger was fan off of the factory third function.
Affiliate Links(it won't cost you more but we might make a few bucks!)
GoPro Hero 9: amzn.to/2Yyxiyo
Canon M50: amzn.to/3Amqd0Q
Rode Wireless Go II: amzn.to/2WQjezy
Rode VideoMicro: amzn.to/2WUVw5m
GoPro Hero 9 Media Mod: amzn.to/3uRLmPg
Stalls look pretty amazing! Christy’s got a very serious look going on….. Smile girl 😃 Ritchie has it under control! Keep em coming!
Should have all the stall fronts done this weekend then it will only be 18 more to go lol! Thanks for watching Jeff!
The stable really looks good. The hydraulic auger did a great job. You all have come along way. The lighting looks good also. You all must feel good about what you have accomplished - cheers
You are absolutely right about the accomplishment feeling. Also saving close to 100k on labor feels good too but not on my back lol Thanks for watching Bob!
Nice looking work. Just a tip for anyone using an auger…… in dry dirt I auger down to the desired depth, then to get all of the loose dirt out, I put some water in and reverse the auger direction. That will push the water to the bottom of the hole and mix it with the dirt. Then turn the auger in the normal direction a few turns, stop and lift out the mud.
Dude. What it takes to film this stuff, nobody knows, until they have done it. Your videos are a prime source for my education, thank you so much for the effort you put in to share your knowledge and experience. I see your agaravation, I know that look. Please keep doing this.
It makes everytihing twice the work when trying to film for sure!
This video makes me want one of these even more. I just wasted all day yesterday drilling one lousy hole with the 3 point. Rock hard frozen ground and was shearing hardened bolts. Spent all my time working on the auger instead of just putting the post in the ground. Also really leaning towards a hydraulic pounder, but can't justify the price. Keeps costing me a lot of time and aggravation and will reconsider though :D
Full watch and a thumbs up Richie. You answered a question that I had about the auger being reversible. Sweet unit. Made short work of the digging of the holes.
Congrats on the subscriber count. See you for the next one.
Appreciate the support Gary! the final few subscribers seem to be dragging lol We are soo close!
Very nice set up, both the auger and especially the stalls you are building!
I hire a guy to bore holes for the pole barns I build for customers, he has a skid steer and a auger very similar to the one you are using.
Lots of holes, good job
We have an amish contractor lined up for our new building to go up in December. Im sure thats how they will be setting the perma columns. Then they will use a crane or large telehandler to set the truss's. Thanks for watching!
Looking good 👍 I got a pto powered auger stuck once . Two hours later with a four foot pipe wrench and a pipe on the handle . That was enough for me 😂 Hydraulic all the way now . 👍
The small building i used the pto one for height clearance reasons. It was miserable compared to this thing lol. Thanks for watching Stephen!
Wow nice work! Thanks for explaining how you drill down straight. I was wondering about that. Handy attachment!
Thanks for watching Ed. The hydraulic unit saved a ton of time over the three point, its great to have friends that let you borrow their cool attachments!
Thanks for the video, I have been looking at the Premier front post hole digger for my tractor. They now list a tractor mount that offsets that drill to the right side for better visibility.
A lot of them do that! I’ve been thinking of fabbing and welding some side mounts but my time is currently very limited lol
Slicker than snot on a door knob!
LOL Thanks for watching Roy!
The auger did great! Much better then a 3 point version. The stalls are looking nice! Take care buddy, have a great week!
Thanks for stopping by Ben, only 18 stalls to go lol
@@HillsideAcres it’s going to be really nice!
That auger is sweet! Great work, great video!
Thanks for watching Logan!
Nice Job, Richie. The stalls are looking good. Sucks about work but it is paying the bills until you are YT Famous !
Thanks for dropping by Kyle. hopefully 21 more subs and i can quit my job LOL wish it worked like that.
You two can get a lot of stuff done in a short amount of time😁 great job on the stables👍 1000 subs is just around the corner😁 Have a good day thanks for the video🚜💨💡😁👍
It all went up faster than expected. The right tools for the job helped a lot too, Thanks for stopping by Mitch, only 3 away from 1,000!
Bonsoir mon ami 😊👍 You have nice horses 😊👌 I was looking at your front tire on how they go down an up and it is very impressive 😮 Great and beautiful farm building construction Sir 👍😊👌💪 You both have outstanding construction skill 🧐👌👍 Keep up your safe work to both of you during that very busy time of the year 👌😊 You ARE THE best 😊👌 Cheers 🍻
Awesome to hear from you dave. Progress is really coming along great. But i cant wait to finish as it takes my time away from all of the other projects lol Thanks Dave!
@@HillsideAcres 😊👍🍻
The stalls are looking good, you guys were rolling 👍🏻, the Big M did a great job 👍🏻. Was the auger a rental ?, have a great week Richie and Christy 🙂🙋🏼♂️👍🏻
I borrowed the auger from a friend of mine who usually lets me take what ever i need as long as it is not tied up. Well worth it over the three point. Thanks for stopping by Luc!
Hello from Minnesota! Getter done!
Thanks for watching Ricky!
CONGRATS ON 1K SUBSCRIBERS!!!!
Thank you so much for the support, now its a waiting game to get monetized.
Looks like the big M did a nice job!
Thanks for watching!
I'd like to use a 2" x 18" wood auger to bore tree stumps. I think I only have 9gpm. T474. We have 13 stumps to rớt out.
Better off renting a stump grinder
Looks good but remember when calculating the flow by the time its coming out the fitting on the 3rd function its alot more reduced.
He final calculation is when I hit the button and I like the end result lol
Where can you buy an auger like this?
Sir only gear box cost
Trying to find a way to contact you, Will Ya’ll Ever Come Back and Put any more shows on Utub? If Not will you Post yes or no for us please?
Yes we do plan to do more videos. Have been having a hard time keeping up on the videos between working and some issues! Thanks for reaching out
Would that work with a Deere 3025d??
Depends if you have hook ups and enough flow but I don’t see why not