Nice build in a reverse case, but you put the GPU in a wrong PCI-E slot, this does not matter when using something like 1650 but in the future if you upgrade this, put it in the slot underneath SSD top slot for best performance. ;-)
Great vid :)) i could say only to make those 3 fans to push air in not out, because you have those 3 fans and those 2 on the cooler for exhaust and its not gonna have good fresh air in the case, so just turn those 3 fans to the other side so they could push air in the case and those 2 in the behind to stay like that for exhaust. :)) :P
@@teaganjoyy8495 I hope you mean that 2 of the fans are backwards. At 12:54, the bottom one is oriented correctly, giving the gpu fresh air. The top 2 are sucking it away from it. You want to flip the top 2 fans so they are facing the same way the bottom fan is.
Congrtaz! But I would highly recommend to flip the AIO radiator upside down as soon as you can so that the pump stays at a lower level of the radiator's connection with the tubes. Otherwise, this set up can really shorten the life span and affect the functionality of your AIO cooler. Good luck,
this is an acceptionally great video from ASMR, to letting us watch you build, and showing us your PC parts, you deserve a sub. also do you need a windows 10 USB to install windows?
and as for the fans in the front you would want to flip it so the back of the fan is facing your GPU because the back of the fan is where the air is blowing out of.
I really enjoy watching this video🥰 do you think getting a gtx 1650 would be good for live-streaming at a good resolution? And btw, your pc is so nice looking 👍✨🌸❤️
@@georgenicholas4700 the motherboard is great but i accidentally got the version without wifi so i had to get a wifi/bluetooth adapter. it was only about $30 and fits perfectly in the case but it probably would’ve been easier to get the z590-P wifi mb.
I would not recommend a GTX 1650 as of now, especially with the 4GB of Vram. I don't know your budget, but for around $300 you can get a Radeon 6600XT that would absolutely smoke a 1650 (170% faster!). Good Luck
Afraid of bending the pins or something? I had broken a motherboard some years ago because I wasn't careful with the pins. However, it wasn't the most stressful thing to me. The top of my list goes to flashing the bios. My pulse was racing when flashing the bios.
I cringe every time I see someone put their motherboard on top of the anti static packaging, the inside is anti static not the outside, you could seriously damage your motherboard by doing that. The right way to do it is to put it on top of the motherboard box.
Bruh, all people being "nice build"... I just see the same "Girl- gamer" pink pc again and even built like shit. Plus, Ventus Mini moment. And that case? Everything is visible, wires and shit. But who cares, what really matters first is that it's pink. Guys don't take example from this build, it's a total waste of money.
since this video i’ve done some cable management and fixed some of the stuff i put in wrong, it was my first attempt and i’m honestly surprised it worked so i’m proud of it either way 🤷♀️
all that tho play Minecraft .......... expensive motherboard ,,,,expensive ram,,,, 750 w psu ,,,not realy necessary for that pooor Gpu .... poor judment
Mistakes that u made: PSU was installed in wrong direction the fan needs to go on bottom of case but this doesnt matter that much cuz ur PSU isnt in a closed space GPU installed in the wrong pcie slot it needs to go on the slot under the m.2 ssd ram installed in wrong slots and it doesnt get advantage of dual channel mode it need to be on slot 2 and 4 not on 1 and 3 the black thing that screws around the cpu (i forgot name) needs to be put on the aio block then screwed down so you can add presure so you dont have as big of a gap beetwen the CPU and aio block but for ur first build its rly good good job
Nice build in a reverse case, but you put the GPU in a wrong PCI-E slot, this does not matter when using something like 1650 but in the future if you upgrade this, put it in the slot underneath SSD top slot for best performance. ;-)
Awesome build. Just 1 minor thing, it would be better to put the RAM in the 2nd and 4th slot to use dual channel memory for some extra performance
Yup, even says that in the motherboard manual which she showed to the camera so idk how you miss that lol
Also enabling XMP will give you some performance boost. Not knowing the max budget here she probably could've gone with a newer platform?
i hear the 2nd and 4th slot is best for inserting ram. its further away from where the heat will be produced
Yes first ram is near to cpu cooler which is blowing out hot air
Could we have a parts list please? I’m in love with this build :)
my linkpop is in my bio! it has all my parts :)
amazing video, loved the calming vibes and music in the background!!
i appreciate this video! im looking to build my own pc as well and i love how calm this video was lol
that was so nice to watch ! and your pc is so cute !
Always nice to see something other than "all white minimalism"
Great vid :))
i could say only to make those 3 fans to push air in not out, because you have those 3 fans and those 2 on the cooler for exhaust and its not gonna have good fresh air in the case, so just turn those 3 fans to the other side so they could push air in the case and those 2 in the behind to stay like that for exhaust. :)) :P
once i finished the build i realized i put one of the fans in backwards so they’re all facing the right way now! :)
@@teaganjoyy8495 Cool! Then everything is good 😊 Greetings From Bulgaria 🇧🇬
@@teaganjoyy8495 U should also flip the aio cooler so that the tubes are above :)))
@@teaganjoyy8495 I hope you mean that 2 of the fans are backwards. At 12:54, the bottom one is oriented correctly, giving the gpu fresh air. The top 2 are sucking it away from it. You want to flip the top 2 fans so they are facing the same way the bottom fan is.
would love to see a parts list, build looks really super cute though
parts list is a link in my channel description!
@@teaganjoyy8495 I wish the parts list was a little more detailed. leaves something to be desired
Congrtaz! But I would highly recommend to flip the AIO radiator upside down as soon as you can so that the pump stays at a lower level of the radiator's connection with the tubes. Otherwise, this set up can really shorten the life span and affect the functionality of your AIO cooler. Good luck,
Nope
Doesn't matter, it's installed fine since the highest point of the radiator is higher up than the pump
Great vid, and nice build! 😊
Your PC Looks great!❤️
Also the ram need to be in 2nd and 4th slot on Motherboard. 😊
Congrats on your first successful attempt! The case part at the end is actually the 2.5 SSD/3.5 HDD tray. Maybe it is time for some cable management?
Nice video, really enjoyed it!!!
funky case I dig it slay girl !
yaay congrats!!
this is an acceptionally great video from ASMR, to letting us watch you build, and showing us your PC parts, you deserve a sub.
also do you need a windows 10 USB to install windows?
No you can use a key I think
@@bee-yu9ou wait how?
You need a flash/thumb drive to download it the buy a windows key to activate windows
Nice build, just subscribed to your channel ❣️
nice build, any specific use for this build. what kind of games? also the gpu should be in the top PCI e slot
nice good job 👀👍
8:28 seems you missed the M.2 Standoff for your drive??
In overall a good build
very nice build but for future references, the aio mout is supposed to go on the head of the aio instead of the motherboard.
and as for the fans in the front you would want to flip it so the back of the fan is facing your GPU because the back of the fan is where the air is blowing out of.
where did you order your parts from?
I really enjoy watching this video🥰 do you think getting a gtx 1650 would be good for live-streaming at a good resolution? And btw, your pc is so nice looking 👍✨🌸❤️
i’ve been playing minecraft on my pc and the graphics are very smooth and clean looking! i don’t stream but i think its a great graphics card. 💗💗
Just make sure it have good memory like 6gb and up on the gpu so it wont bottle neck the cpu.
Love the build can you tell how the motherboard working thinking about buying one.
@@georgenicholas4700 the motherboard is great but i accidentally got the version without wifi so i had to get a wifi/bluetooth adapter. it was only about $30 and fits perfectly in the case but it probably would’ve been easier to get the z590-P wifi mb.
I would not recommend a GTX 1650 as of now, especially with the 4GB of Vram. I don't know your budget, but for around $300 you can get a Radeon 6600XT that would absolutely smoke a 1650 (170% faster!). Good Luck
nice video!
Nice Job !
Noice build but you made a big mistake witch will kill your AIO faster and make more noise you should flip you aio
Nvm I’m just dumb this is actually the best way
Hey nice build but I need to know where u got the windows 11 home because I can’t find it anywhere
i bought it on amazon!
@@teaganjoyy8495 can u copy and past the links?
@@Bye-cu3uw www.amazon.com/Microsoft-Windows-11-USB/dp/B09V6R9QZZ/ref=mp_s_a_1_3?keywords=windows+11+home&qid=1656684769&sr=8-3
@@teaganjoyy8495 you can get a cheap windows 11 key online for like 20 usd, much more affordable
There is no point in buying a ohysical box with the lisence, buy it online from some place that sells cd keys. It's about 10-20 bucks there.
what is your keyboard?
i got the hk gaming gk61 keyboard in lavender with brown switches!!
Wait do u have a rgb fan controller hub? I have a nzxt rgb fan and only the fan works and not the rgb 😭
New subs here and nice pc buid.
I have built a lot of computers and I still get stressed each time I insert the CPU
I was so worried I was doing something wrong bc i had to really push down to get it in there :|
Afraid of bending the pins or something? I had broken a motherboard some years ago because I wasn't careful with the pins. However, it wasn't the most stressful thing to me. The top of my list goes to flashing the bios. My pulse was racing when flashing the bios.
What was that thing with the heart on it? And where can u get it from?
that’s the aio cooler! it cools down the cpu so that the computer doesn’t over heat. it’s by the brand “pinkflow” and you can get it on amazon!
@@teaganjoyy8495 omg thank youu it was so cute so I just had to know!
I cringe every time I see someone put their motherboard on top of the anti static packaging, the inside is anti static not the outside, you could seriously damage your motherboard by doing that. The right way to do it is to put it on top of the motherboard box.
oh wow i didn’t know that! i thought the whole thing was anti-static. thx for letting me know
Stop being toxic! 🤦🤷
U was probably cringe too at it, in first time
How much this kind of pc build?
i’m not sure exactly how much the total was, but i’d say it was somewhere around $1100
Bruh, all people being "nice build"... I just see the same "Girl- gamer" pink pc again and even built like shit. Plus, Ventus Mini moment.
And that case? Everything is visible, wires and shit. But who cares, what really matters first is that it's pink.
Guys don't take example from this build, it's a total waste of money.
since this video i’ve done some cable management and fixed some of the stuff i put in wrong, it was my first attempt and i’m honestly surprised it worked so i’m proud of it either way 🤷♀️
all that tho play Minecraft .......... expensive motherboard ,,,,expensive ram,,,, 750 w psu ,,,not realy necessary for that pooor Gpu .... poor judment
i play other games lol mc was just the first thing i downloaded
it really doesn't matter. a game is a game and it doesn't affect you. toxic for no reason ew.
haha i7 11th gen and 1650 with 750 w psu...xD lame build
It’s a fist build maybe instead of being toxic give tips how to make it better next time
Why not, I bet U don't know how to phone in charging cable!
Stop being toxic, and try to help next time!
What a lame comment...
Mistakes that u made:
PSU was installed in wrong direction the fan needs to go on bottom of case but this doesnt matter that much cuz ur PSU isnt in a closed space
GPU installed in the wrong pcie slot it needs to go on the slot under the m.2 ssd
ram installed in wrong slots and it doesnt get advantage of dual channel mode it need to be on slot 2 and 4 not on 1 and 3
the black thing that screws around the cpu (i forgot name) needs to be put on the aio block then screwed down so you can add presure so you dont have as big of a gap beetwen the CPU and aio block
but for ur first build its rly good good job