I wish I had a D9 and the excavator that I saw here. So nice. It is out of my means to have one, but at least I can see it here in the videos. Thank you for showing us these beautiful machines.
Hey, you may be able to see one around where you live, look for construction or logging expos near you, and go check them out. Lots of cool stuff to see, and you get to climb in them and check them out.
On CAT D6N,D8R,D9N,D9R I did maintenance on the shaft. Replacement of engine oils, gear oils - in any weather. They are the best machines after the Russian DT 250. Jsem Čech.Mějte se hezky
That's great guys, don't you just love new equipment. What other prep work do you do other than putting the blade on before you put the dozzer to work?
I'd like to see a video from inside the cab of a driver steering the trailer wheels. The driver has to steer the cab, shift and steer the trailer all at the same time.
Nooteboom pendel-X , great material ! Dutch and German design , you can lift axle lines when empty and you could add extra axle at the front all hydraulic/electronic steering each axle line is rated and approved for 16 metric tons
Cat's really are pretty when they're new. Although, I don't like the new Cat logo. Looks toyish like it belongs on a Tonka. I miss the traditional Cat lettering. Sweet D9 though👍
Man, they sure are pretty when new. I bet writing the check for it wasn't so pretty though LOL I'm impressed that that small a fork lift could handle all that weight like it did. Doesn't look to have enough counter ballast to lift that blade, but it wasn't a problem
Very cool. And the forklift design is so efficient. When you see the large marble at the barrios mine and the big payloaders bouncing around. A much smaller forklift handles them with ease
Great vid ! Your videos are so crisp ! The size of the D9 is amazing ! It's certainly not a small crawler; I can remember long ago, it ( the Cat D9) was the largest of the Caterpillar line, then when you park a D9 next to a Cat D11, the size difference is profound. I love your channel and variety of videos. Keep up the fantastic work and production. Warnest Regards from Arizona.
@@antpoo What you just said has absolutely _NOTHING_ to do with how you calculate what is required to safely secure a piece of equipment for transport.
@@DieselFuelOnly yes my calculation is based on the physical sciences. Yours is dictated by regulations enforced by overprotective insurance companies. Are you trying to say 3 straps were not sufficient and if so why not? Or is it simply you don’t understand F=MxA of which A must interact with G and overcome its downward moment in order to create force sufficient to overcome the breaking strain of 3 x 5 tonne straps?
As usual, other countries are more efficient then the US. That would be at least a 3 truck move depending on the weight. The ripper would have to be removed because it is a divisible part of the load, it’s only because everyone has a hand out looking to get paid.
Just got my D4 back to the ranch after several minor repairs. The D9 is too large for my uses but what a machine! What country is this? Sounds a bit Russian but I think not.
@@MegaMachinesChannel Opa! The birthplace of mathematics, philosophy, theater, sculpture, and so much more! Greetings from Texas! Home of cowboys, ranches, the Alamo, and friendly people!
![▶️DOZER MANUFACTURING🚧2024: Bulldozer Assembly line [CAT, Dressta, John Deere] How it's made? USA](http://i.ytimg.com/vi/uL6p_sbMIA4/mqdefault.jpg)
Big respect for the truck driver for how he's loaded that D9 up and all the other equipment that goes with it, one load and nothing left behind.
🎉🎉🎉🎉🎉
Excellent 👍👍👍👍👍💪💪💪💪💪💪💪💪💪💪💪💪💪💪💪💪💪💪💪💪💪💪💪💪
I wish I had a D9 and the excavator that I saw here. So nice. It is out of my means to have one, but at least I can see it here in the videos. Thank you for showing us these beautiful machines.
Hey, you may be able to see one around where you live, look for construction or logging expos near you, and go check them out. Lots of cool stuff to see, and you get to climb in them and check them out.
On CAT D6N,D8R,D9N,D9R I did maintenance on the shaft. Replacement of engine oils, gear oils - in any weather. They are the best machines after the Russian DT 250. Jsem Čech.Mějte se hezky
O
z0P
Y
0
Impressive work and machinery!!
Once again, reminding American truck drivers how archaic their equipment is.
its very nice to see transportation of new equipment especially caterpillar.
Brilliant 😎👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
Marvelous machine, wonderful technology
Thank you for share.
A long way from a 955, my dad had a few cats in the early 60's...
I would imagine how low that D9 sits that their route is well planned to avoid any "bumps" or humps in the road.
Very nice bro
Shoot I wanted to see the trailer lift the dozer.
Looks like a fun time 😁Beautiful machines.
💪👍👍таджикистан
That CAT’s C18 Diesel engine sounds beautiful and amazing!!!!
😍 Los he operado 💪🏽 tecnología , potencia , comodidad operativa y rendimiento productivo .
Brilliant driver thank you
Ich bin verliebt in Maschinen
it`s my gift for Andrew Camarata =)
Thenk you very match.....
I'm secretly buying one of these, drop it in Andrew Camarata's
front yard of his Castle.
That's great guys, don't you just love new equipment. What other prep work do you do other than putting the blade on before you put the dozzer to work?
So many new dozers?! Amazing.
Классная техника!!! В России такое не умеет делать ☝️💯😬😵🙈 а на Сат работать всегда приятно👍❤️
Love love
Looking forward to getting ours in October,awesome
Lucky you
Si e Sido amante alas máquinas pesadas
Great job, there a great Dozer the D9s are.
I'd like to see a video from inside the cab of a driver steering the trailer wheels.
The driver has to steer the cab, shift and steer the trailer all at the same time.
Man learned to make bulldozer
Nice 👍🏻
Listen to that raw power!
Incredible
Digging these European designed lowbed trailers with rear steering. I'd kill to have one of these here in NYC
Seems like a good design.
Nooteboom pendel-X , great material ! Dutch and German design , you can lift axle lines when empty and you could add extra axle at the front all hydraulic/electronic steering each axle line is rated and approved for 16 metric tons
Pour être du métier, ça me fais encore rêver de revoir toutes ces manoeuvres !
Man would I love to play with that d9 I would totally be in heaven
New Dozer
Gostei ja muito este serviço em minas gerais minha amada cidade marcio se Deus quiser vou voltar a trabalhar com empilhadeira
Deses Chile en mi trabajo esta el D 11 monstruo
Σας ευχαριστώ για το βίντεο. Είμαι ευγνώμων 😊
Nice dozer
belle video et beau D9
Eu sou operado de máquina pesada
الله. ماشاء الله😉😊
👋👍👍👍👍👍
Cat's really are pretty when they're new. Although, I don't like the new Cat logo. Looks toyish like it belongs on a Tonka. I miss the traditional Cat lettering. Sweet D9 though👍
Caterpillar 💪👍👍🎥😍👍
Ein sehr schönes Video . Top . Gruß Kalle
Amazing trailer.
💯Awesome video guys lovely Bulldozer thanks for sharing 👍👍
Maquinas e equpamentos sensacionais equipe competentes....
Nice
it bring ets2 to life. nice vid
Truck is a beast Benz power
thanks for this video
Caterpillar 💪 Amazing! Thanks for Video!
Man, they sure are pretty when new. I bet writing the check for it wasn't so pretty though LOL I'm impressed that that small a fork lift could handle all that weight like it did. Doesn't look to have enough counter ballast to lift that blade, but it wasn't a problem
Very cool. And the forklift design is so efficient. When you see the large marble at the barrios mine and the big payloaders bouncing around. A much smaller forklift handles them with ease
Ion I am not iikjuuuii
lol it was a heavy check, how much do you think they cost ?.
@@mabrenz_n5391 They are over 1 million US dollars, but not sure how much over.
Great vid !
Your videos are so crisp ! The size of the D9 is amazing ! It's certainly not a small crawler; I can remember long ago, it ( the Cat D9) was the largest of the Caterpillar line, then when you park a D9 next to a Cat D11, the size difference is profound.
I love your channel and variety of videos. Keep up the fantastic work and production.
Warnest Regards from Arizona.
Thanks Bruce, have a nice weekend
Even a D6 next to a D9 is quite a bit larger 😀
999998888
I think you’re referring to the D8, 31 tons without the blade. I used to carry them on my low loader regularly.
😮
I. Love this kind of work
Excellent ! Best of the best !❤❤♥️♥️🌹🌹
Visite Campos Dos Goytacazes RJ Brasil
Not seeing the truck lift the dozer deflated my joy. Maybe next time?
La maniobra bien...Falta normas de Seguridad en la patés del Personal?
Really cool! I'll keep my hopes up that one day we get to see a D10 or a D11 this close. Thanks for another great vid.
I'm more amazed that little truck could pull all that weight.
This Dozer weighs 50-52 tonnes, the truck can pull 250 tonnes!
it has a torqe converter and 500+ european horsepower
The odds are that mine has purchased every D9 on the screen.......
Só gigantes! I am Brazil
I hauled the d11 on ats. 🤣
Boa equipe é um Bom trabalho 👏👏👏👏👏👏👏👏👏👏👏
Nice tractor 👍👍👍
So awesome.
Maybe it's just me but I think I'd want something a little more substantial than 3 straps holding that blade LOL
3 straps totally ample. The truck would never be pulling more than 1g around corners so 95% of the weight is directly downward not sideward.
@@antpoo What you just said has absolutely _NOTHING_ to do with how you calculate what is required to safely secure a piece of equipment for transport.
@@DieselFuelOnly yes my calculation is based on the physical sciences. Yours is dictated by regulations enforced by overprotective insurance companies.
Are you trying to say 3 straps were not sufficient and if so why not?
Or is it simply you don’t understand F=MxA of which A must interact with G and overcome its downward moment in order to create force sufficient to overcome the breaking strain of 3 x 5 tonne straps?
Красивая техника 👍👍👍
succes
As usual, other countries are more efficient then the US. That would be at least a 3 truck move depending on the weight. The ripper would have to be removed because it is a divisible part of the load, it’s only because everyone has a hand out looking to get paid.
Mantap kawan 👍
Love cat equipment
Hello nice to meet you my friend
Parabéns pelo conteúdo CAT e toop é concorrência fica bem distante nos retrovisores.
Gostei 😃
👍
And we used the original CAT - CAT 15W-40,CAT 30W,CAT 10W. Otherwise, gentlemen, it was very nice.
Saya suka banget mobi ngkat barang keren teman
very nice❤️️
,👍🏻👍🏻👍🏻
I don't understand what they saying but great video
Bonjour comment allez-vous svp je peux avoir une place dans votre société comme aide ? merci beaucoup
For Brazil Vale .🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷
Am Trailer sind überall Profillose Reifen drauf!
wirklich , gut der autobahnpolizei gibts nicht im griechenland , beim F1 gibts es auch so
Just got my D4 back to the ranch after several minor repairs. The D9 is too large for my uses but what a machine! What country is this? Sounds a bit Russian but I think not.
We are from Greece friend
@@MegaMachinesChannel Opa! The birthplace of mathematics, philosophy, theater, sculpture, and so much more! Greetings from Texas! Home of cowboys, ranches, the Alamo, and friendly people!
Good work
👍💪🏻💪🏻👌🏻👏👏👏👏
👏👏👏👏👍👍👍🚜🚜🚜🚜👌👌🇧🇷
Поздравляю👏👏
с чем?
🔥🔥🔥🔥🔥🔥🔥💪🏼
Oi 👍👍👍👍👍👍
Great channel top Quality video and what a machine what's the fuel consumption on the D9
It looks like the size has been increased again. Maybe not, after looking closely. This tractor, has no series letter??
New caterpillar series called D9 without any letter
Wow, besar mobil nya