The deep sanding tool is from VERMEC in Queensland, Australia. For some strange reason it isn't shown on their website but it can be ordered from them. The rotary sander IS shown on their website. Neither John nor I can remember what the wood was. Since that lesson I've made lots of Tulips, kept some and given the rest as presents. Since the video I have ground the end of a 1" spade bit which gives a nice round bottom to the Tulips.. www.vermec.com/vermec-sanding-handle--accessories.html
I've been buying all kinds of things getting to where I can make these with ease and I am almost there, the only thing I'm missing is the velcro thing you have for sanding inside, what do I look for to make one of those.
2 inch Diameter Bowl Sander with Dual Bearing Head and 2 inch Foam Hook and Loop Sander with 1/4 inch Mandrel and 9 inch Long Hardwood Handle from amazon
2 inch Diameter Bowl Sander with Dual Bearing Head and 2 inch Foam Hook and Loop Sander with 1/4 inch Mandrel and 9 inch Long Hardwood Handle, from amazon
Ciao Herry Ritengo che il tuo sistema per fare tulipani sia migliore del mio comunque complimenti. Comunque quest' anno per la cena di Natale ad ogni signora della tavolata ho regalato un tulipano di legno. E' stato un successo
HARRY,, TAKE THAT BLOODY HAMMER OFF HIM ,,THATS NO WAY TO TREAT A MORSE TAPER ,,.He should know better ,,one, the hammer could shatter,, two,, round over the drive ,then it won't fit in the headstock,,.
The best of the best I now use your method thanks harry from Scotland
Thank you Harry enjoyed it very much
Great video, I made my first one yesterday and it turned out great! Plan on making a dozen or so for my wife, thank you for the video!
Great video! Can't wait to try this
Beautiful! I need to try do some of these for my wife! Maybe out of some exotic wood or with dye. :) Thanks for sharing!
Thank you for the video and the idea.
Really like these! The petals are the thinnest of any I've seen except for using shavings.
Merci pour cette vidéo et merci pour la technique.
Vivement une prochaine vidéo.
Great project !!!!
Well made video, Harry
Very good video, thanks
Very nice loved I wanted to have a machine of this. Heppy Birthday
Thanks for the video Iam off to vermec tomorrow
The deep sanding tool is from VERMEC in Queensland, Australia. For some strange reason it isn't shown on their website but it can be ordered from them. The rotary sander IS shown on their website. Neither John nor I can remember what the wood was. Since that lesson I've made lots of Tulips, kept some and given the rest as presents. Since the video I have ground the end of a 1" spade bit which gives a nice round bottom to the Tulips.. www.vermec.com/vermec-sanding-handle--accessories.html
John mentioned the smell of camphor laurel during the video - was that the wood
Harry Sinclair p
If you pin this comment, more of your viewers will see it.
I've been buying all kinds of things getting to where I can make these with ease and I am almost there, the only thing I'm missing is the velcro thing you have for sanding inside, what do I look for to make one of those.
Good idea. Thanks.
Very nice, thanks
Nice job:o)
I like. thank you.
really nice work man! i bet if you used colored stain on those it would be very nice too! thankx beau
hola amigo lindo trabajo
Nice job what kind of wood did you use Andy
What is the name of that sander? Tulip game out great!
2 inch Diameter Bowl Sander with Dual Bearing Head and 2 inch Foam Hook and Loop Sander with 1/4 inch Mandrel and 9 inch Long Hardwood Handle from amazon
What is the name of that spinning sanding device that you use to finish sand the flower? I love it and have never seen it before.
2 inch Diameter Bowl Sander with Dual Bearing Head and 2 inch Foam Hook and Loop Sander with 1/4 inch Mandrel and 9 inch Long Hardwood Handle, from amazon
Interesting video. Thank you! Like!
Аleksey Bek 🐴🐴
cokk
Bravo très belle fleur merci pour le partage
Ciao Herry Ritengo che il tuo sistema per fare tulipani sia migliore del mio comunque complimenti. Comunque quest' anno per la cena di Natale ad ogni signora della tavolata ho regalato un tulipano di legno. E' stato un successo
Gorgeous creation. What's the model of this sander? I really enjoyed the work that it does.
2 inch Diameter Bowl Sander with Dual Bearing Head and 2 inch Foam Hook and Loop Sander with 1/4 inch Mandrel and 9 inch Long Hardwood Handle
سلام.این صنعت درودگری ما ایرانیان است وبس.IRAN👍👍👍
It’s so easy with the right gear isnt it? Now trying to make the same thing on a EMCO UNIMAT 3 lathe! Drilling a 25mm hole is a real hoot trust me.
please tell, what name wood?
Great demo, but tulips have six petals/sepals.
صناعة ساعة خشب مرصعة بالصدف
A tulip has six petals. :)
Not this one. LOL
Shouldn't your apprentice be wearing a facemask too?
great project.... slow down dude. Some of us are learning.
HARRY,, TAKE THAT BLOODY HAMMER OFF HIM ,,THATS NO WAY TO TREAT A MORSE TAPER ,,.He should know better ,,one, the hammer could shatter,, two,, round over the drive ,then it won't fit in the headstock,,.
Zzzz