How to Replace Spark Plugs 2007-09 BMW X3
HTML-код
- Опубликовано: 5 мар 2020
- Buy Now!
New Spark Plug Set from 1AAuto.com 1aau.to/ia/NGETK00045
Spark is one of the four required components for an internal combustion engine to run. If your spark plugs are failing, worn, or dirty, you may experience rough starts, rough idle, poor performance, or poor mileage. This video shows you how to install new spark plugs on your 2007-09 BMW X3.
• Check here for more videos on the 2004-10 BMW X3: • BMW X3 2004-10 1st Ge...
This process should be similar on the following vehicles:
2004 BMW X3
2005 BMW X3
2006 BMW X3
2007 BMW X3
2008 BMW X3
2009 BMW X3
2010 BMW X3
Tools you will need:
• 13mm Wrench 1aau.to/oib/1AXAA00010
• 10mm Socket 1aau.to/oxj/1AXAA00017
• 13mm Socket 1aau.to/oBC/1AXAA00015
• Trim Tool Set 1aau.to/ojn/1AXXX00006
• 5/8 Inch Spark Plug Socket
• T30 Socket
• Ratchet 1aau.to/oEa/1AXAA00016
• Torque Wrench 1aau.to/orU/1AXAA00044
• Bungee Cord
• 5mm Hex Socket
Subscribe: / @trq
Check out our playlist:
BMW X3 2004-10 1st Gen E83: • BMW X3 2004-10 1st Ge...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. 
Авто/Мото
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts
√ *Do it Yourself*
√ *Save Money*
Am I missing something? When did you take off the cables?
Thanks; very helpful video.
Great video.
What is the plug gap setting?
.44 I think but some dont need gap
@@wolfcollins3490 ..always check for correct gap, ALWAYS.
Bellity
Why did you disconnect the battery?
I'm guessing redundant safety,
To allow safe disconnection of the positive cables under the hood without having to later shoot an ECU replacement video.
@@ericsmith5324 ...but if those positive cable that he did not show touch any other metal, they ground and could cause a problem.
@@royquesada5295 They can touch it, since the ground from the battery is disconnected. :)