F5J Glider Built

Поделиться
HTML-код
  • Опубликовано: 15 сен 2024
  • F5j Glider built and first flight
    Wing Span : 2330mm
    Wing Chord : 193mm(middle wing) 125mm(wing tips)
    Elevator Span : 480mm
    Elevator Chord : 100mm(root) 50mm(tips)
    Fin/Rudder High : 250mm
    Fin/Rudder Width : 195mm(bottom) 50mm(top)
    Lenght : 1310mm(dari spinner ke ujung rudder)
    AUW : -/+ 759-760gram
    Electrical.
    Motor : size 2826 1100-1200kv
    ESC : 18A with BEC
    Battery : 3S lipo 850mAh 25C
    Servo : 4x 9gram servo
    Rx : 8ch
    For more detail picture please visit my built thread
    gaero.org/forum...
    Thanks for watching

Комментарии • 17

  • @BrianPhillipsRC
    @BrianPhillipsRC 6 лет назад +2

    another beauty!!!

  • @collinmccallum
    @collinmccallum Год назад

    amazing!

  • @juliaero5348
    @juliaero5348 Год назад

    fuselage nya bisa bulet gitu dari balsa pdhal

  • @zolatanaffa87
    @zolatanaffa87 6 лет назад +2

    Very nice model! But the motor... You built it? Or modify?

    • @gdaeroartpac9621
      @gdaeroartpac9621  6 лет назад +1

      Thank you. about the motor, I only modified it because I thought the kv was too high for a 9 inch propeller, actually I had previously searched for a 1400kv motor, but i can only get 2200kv motor at local hobby shop where i'm living, so i decide to modified it to get lower kv

  • @Chorney08
    @Chorney08 3 года назад

    LOVELY!
    Where can I get a plan for this?

  • @QDStrength
    @QDStrength 4 года назад +1

    ternyata orang wkwk land, covering film nya dapet dari mana ya om? saya pengen coba bikin F3K metode balsa rib, selama ini baru bikin foamie

    • @gdaeroartpac9621
      @gdaeroartpac9621  4 года назад

      Ahah.. betul om, cover utk yg semi transparant sya pake plastik laminasi om, bisa di dapat di toko peralatan kantor (per-roll) utk yg di leading edge wing sya pake covering film HK (sekedar utk menambah warna)

  • @KAJBS
    @KAJBS 3 года назад

    What kit is it?

  • @AeroCraftAviation
    @AeroCraftAviation 6 лет назад +2

    How long did it take you to build?

    • @gdaeroartpac9621
      @gdaeroartpac9621  6 лет назад

      Copterdude
      approximately a month including gathering all the materials

    • @AeroCraftAviation
      @AeroCraftAviation 6 лет назад

      Wow! That's quick! I'm working on a 2.8 meter F5J now and I have been working for about a month at 1 and 1/2 hours a day, and I'm not even half way through!

    • @gdaeroartpac9621
      @gdaeroartpac9621  6 лет назад +2

      I usually do it for 3 to 5 hours a day and mostly at night, but on weekend can be up to 8 hours.
      what can i say, i can't stop when i enjoying something to do, eheh..
      please post the video when yours is done, I'll be happy to watch it.

    • @ladraode9dedos409
      @ladraode9dedos409 5 лет назад +2

      Good one,
      I like very much your wood pod and the thick wing ribs!
      One suggestion, bigger is better, try to build a 3 meter or larger next time, it is almost the same effort and much better results.

  • @achmadalwanhidayat4545
    @achmadalwanhidayat4545 3 года назад

    bisa pesen ngga om?

  • @ВоваИванов-г5с
    @ВоваИванов-г5с 3 года назад

    Я проще делаю в миллион раз.