You’re one creative guy to come up with this project, but dude, that looks like it took you a long, tedious time and patience to make these! I can’t believe you routed such small pieces with your fingers right there at the bit! You got yourself some big balls my friend. The card holders turned out really nice. Very unique project.
One way to skip some steps would be forgoing the tabs on your CNC model. Since you’re using the double blue tape and cyanoacrylate glue trick, no need for holding tabs. It’ll save you time not needing to cut out the parts from the tabs or having to flush trim the leftover nubs. Love your work, Ben!
It's always nice to see another Woby video pop up in the feed. I really like your music choice and don't think those slick cuts that were timed to the beat went unnoticed. Definitely a slick, albeit tedious way to make use of those scraps, but man, I gotta applaud you for actually USING those pieces and making something from them. Reduce, Reuse, Recycle. WOOO!!!!
Such a clean, elegant, and cool design. Great overview of putting them together. Takes a lot of work to crank out a nice product like that. Thanks for sharing!
I'd love to see someone throw all those warped off-cuts into a woodchipper and press them into something like OSB boards and maybe build a surf shack or something like that out of them
This is my favourite project yet. The production of the raw stock from which you build your products is an artform in and of itself, so it's all the more inspiring to see you apply it so creatively in all the ways you do. thx for the vids king p.s. - loved the detail about j capacity haha
i was wondering about what you've been up to so it's cool to see a new video! you have creative problem solving skills. it is cool to use up even the worst parts of the boards - love low/no waste. sad i didn't get to your store fast enough, the cases are sick.
Genuine question. What is the foldable spray booth even for if it's not closed completely? There's a big gap and you even spray yourself outside of the booth putting all those particles in the air outside of your booth. I'm confused.
Do you sketch any of your idea down? Or do you have an idea/vision in your head and modify it as you go? Just curious about your process. I have to draw my ideas down.
As a longtime all-notifications sub on RUclips, I feel left out for not "supporting you" on Patreon or Instagram. Is RUclips a side gig for you now? Subs don't matter?
That's quite spooky a was just talking about u with Mark over @dainermade in Australia late last night early this morning then u pop up funky little peice! 🏴👍 Like u added or joints!😎😎
Get Surfshark VPN at surfshark.deals/woby
Enter promo code WOBY for 83% off & 3 extra months for FREE
You’re one creative guy to come up with this project, but dude, that looks like it took you a long, tedious time and patience to make these! I can’t believe you routed such small pieces with your fingers right there at the bit! You got yourself some big balls my friend. The card holders turned out really nice. Very unique project.
One way to skip some steps would be forgoing the tabs on your CNC model. Since you’re using the double blue tape and cyanoacrylate glue trick, no need for holding tabs. It’ll save you time not needing to cut out the parts from the tabs or having to flush trim the leftover nubs. Love your work, Ben!
The fact that Total Boat used the iconic honey bear bottle for the finish is kickass.
It's always nice to see another Woby video pop up in the feed. I really like your music choice and don't think those slick cuts that were timed to the beat went unnoticed. Definitely a slick, albeit tedious way to make use of those scraps, but man, I gotta applaud you for actually USING those pieces and making something from them. Reduce, Reuse, Recycle. WOOO!!!!
Such a clean, elegant, and cool design. Great overview of putting them together. Takes a lot of work to crank out a nice product like that. Thanks for sharing!
I know, I know, the rainbow is beautiful, but support veneer was looking pretty cool too!
So nice to see Dave make an appearance. That red poster catches your eye anywhere it's hanging!
I'd love to see someone throw all those warped off-cuts into a woodchipper and press them into something like OSB boards and maybe build a surf shack or something like that out of them
The wallet looks like a giant rainbow colored Zippo lighter😆 And that Whooooo!!!! Is everything!!!!
We LOVE ours! Thank you so much!
This is my favourite project yet. The production of the raw stock from which you build your products is an artform in and of itself, so it's all the more inspiring to see you apply it so creatively in all the ways you do.
thx for the vids king
p.s. - loved the detail about j capacity haha
Bags and laptop cases from these scraps would be pretty awesome too
It's been a minute Ben, I'm so stoked to see you making videos still.
These are beautiful, very nice job dude.
Keep the hits coming my friend 👍👍
A workbench top out of skateboards would be cool.
i was wondering about what you've been up to so it's cool to see a new video! you have creative problem solving skills. it is cool to use up even the worst parts of the boards - love low/no waste. sad i didn't get to your store fast enough, the cases are sick.
Ideas made out of used skateboard:
- salt and pepper shakers
- chess board and chess peices
Nice job. Keep up the great craftsmanship and hard work my friend. Keep making. Woo-hoo. God bless.
beautiful, great idea
Is that a silicone mat your using to shield your workbench from the epoxy?
Darn, I thought you were making door pulls for your van project at the beginning! 🤣
The man is back!
07:32 love that! Work smart not hard!😂
Amazing talent mate
Love your creativity! Great work!
Do you have a wood branding tool.. ? Jw that would look super cool with your logo on those wallets
Bro these things are awesome.. such a good idea.. if you could find a way to streamline the veneer making process you should be mass producing these
Nice. That's a cool piece, and thanks for sharing.
Love this project❤❤❤
The smoovest Woby in the bizness 😎
That looks amazing :) You have true talent
Dude, that is sick!
Awesome video, the process is fascinating. So much work involved. The wallets are rad! Mahalo for sharing! : )
Hey Woby, what (music) do you listen when sand all those pieces ?
And yeah, really cool "something" 🖖🏻
Genuine question. What is the foldable spray booth even for if it's not closed completely? There's a big gap and you even spray yourself outside of the booth putting all those particles in the air outside of your booth. I'm confused.
Honestly it’s more for sanding for me at this point. It keeps the dust contained in one area so I don’t make the entire shop dusty.
really creative
Is this for holding joints? Looks awesome.
Who's the cat with the library of scraps?
Shut your mouth!
I'm talkin' 'bout Ben Woby now...
We can diggit!
I love a good Shaft reference!
God you're so f****** brilliant you are an absolute Mastermind at this 😭🔥🔥🔥🔥
Congratulations. Do you have a sales website? I want to buy this card holder
Do you sketch any of your idea down? Or do you have an idea/vision in your head and modify it as you go? Just curious about your process. I have to draw my ideas down.
What is that yellow marking pen you were using?
Wouldn't a steam chamber work for these warped pieces?
Nice work!
Joint holder >>> wallet
that . . . is a masochistic level of tedium. impressed.
👏👏🔥🔥Sweet project 👍👍Wonder if Total Boat will develop a clear coloured (i.e. non-yellowing) butter?
where the van conversion vids? just curious…thanks…ok, i just heard your comment at the end of the video…see, i did watch till the end!😊
Awesome vid!! Lookin super handsome/cool & love the wallets!!
Good job man
Very impressive but can you make something useful out of the offcuts from this project?😉
Smart buzness man Woo-by/creative.👍
First watched you with the stair project. Been a while.👍
Hi buddy! I like it very much, is it for sale, how much money and where can I buy it?
HELLO DEAR . WHY SOMETIMES YOU USE EPOXY AND SOMETIMES SUPER GLUE ? THANKS
Can you make some that carry cask aswell as card
Smooth
I am really into chess, a chessboard would be super cool
sold out in under 2 days... dayum!
What can I build with 4 2x4?
a bangerrrrrrrr!
How to get a "Custom made project"?
How to get something "custom made" ?
Love from India 🙏🏻😍❤😊👍🏻🇮🇳🚩💐👌🏻
Woooo
How many did you end up making? They’re sold out already! ☹️
Ben, how about a guitar?
Я знал что ты маньяк, но это вообще жесть. 👍
I'm afraid for your fingers every time I see you run small parts on the router. 😬
As a longtime all-notifications sub on RUclips, I feel left out for not "supporting you" on Patreon or Instagram. Is RUclips a side gig for you now? Subs don't matter?
damn thats a cool project.
That's quite spooky a was just talking about u with Mark over @dainermade in Australia late last night early this morning then u pop up funky little peice! 🏴👍 Like u added or joints!😎😎
I realized I hadn't seen a Woby video in a while. Searched and this video was posted 10 minutes before. Meant to be 🛹😂