Great!!! Congratulations! Would you mind sharing the project with instructions? I would be interested in building a similar instrument for a research project. I would have to adjust it to be smaller and levitate liquid droplets.
Fascinating. It appears the ultrasonic emitters are all connected in parallel. The effect is caused by the parabolic reflectors, which create a neutral pressure zone with a properly placed top half, thereby creating a sphere.
This IS real. It's using the ultrasound speakers from the distance detectors. You can de solder them and power them (Only need 2 for this to work). Make sure they are like 1 inch apart and powered on. Then put anything in the middle!
Now cover the entire sky and the entire planet with these sonic emitters to have floating car's and bike's and planes. Sure they will be still and useless but cool for SciFi still shot's.
@TaylorTheDeveloper week Well, what's happening here? You had a frequency that is being pulsed 180 degrees out of phase. Whatever you have in the center of that is sitting in a zone of cancelation. What if you vibrate that zone of cancelation with another frequency? Would that object be in its own "atmosphere"?
How the heck do you use only the HC-SR04s to levitate some small pieces of whatever and these waves are somewhat so strong that they even destroyed the camera footage that he/she was trying to capture by bringing it a bit closer and to the top
And then we hit it with about 10 hundred watt lasers and boom we have fusion can't wait to see when people realise this stuff is actually easy ❤ the only reason it's hard is because society teaches us to believe it is 😊
I think it's because there's the EXACT same pressure on both sides to make them stay in place and if someone calls me a dumb a## I'm going to punch my monitor I swear
it creates criss crossing sound waves and the pieces get stuck in the standing waves so its kind of like a bunches little punches of air keeping it in place.
Standing Wave around 10Khz ? It must measure the impendance of each to control them frequency , viewed on Camera with 100Hz hmm.. looks difficult i can learn here for my stuff ^^ ruclips.net/user/shortsb8of92hBnX0
![MISSING: SLIM SHADY [Expanded Mourner’s Edition Trailer]](http://i.ytimg.com/vi/xh8qgHrOO1g/mqdefault.jpg)
Imagine being a dog near this thing
🤣
Or a bat💀
Bc dogs scare of this Device sound
@@realahmed_tkn no duh
Imagine being a dog.
When you only have 1 ultrasonic module 😭😭😭
i can relate
In this project there is just the speaker of the ultrasonic module, it should be cheap
relatable
@@hyworldteam2990 16 reais cada
me to bro, me to
Some folks in the comments are calling these ultrasonic sensors. They're actually ultrasonic transductors, so they are ultrasonic speakers.
and ultrasonic microphones.
@@jsmythib They can be used for both. In this case they act as speakers only.
Close, but not quite. They are Ultrasonic Transducers, not transductors.
You have to have this many to be sure you have ONE that actually works 😂
It's not speakers because they do not produce or output sound they just sense with ultrasonic waves.
Imagine being able to move them in a shape
Now that would be advanced
@@GOGEDIT Has been done.
Stop time?
Yes i think you can do it actually
Yea just link its controller together and change the higher or lower strength then it can move in 3 axis
Using sounds to make things fly is really creative
Great!!! Congratulations!
Would you mind sharing the project with instructions? I would be interested in building a similar instrument for a research project. I would have to adjust it to be smaller and levitate liquid droplets.
Nah, bro wants to freeze time
Why a liquid, something with thermodynamics?
Fascinating. It appears the ultrasonic emitters are all connected in parallel. The effect is caused by the parabolic reflectors, which create a neutral pressure zone with a properly placed top half, thereby creating a sphere.
Mds vc fez tudo isso parecer tão fácil
@@arroz742 mas é. kkkk
bro turned into doofenshmertz
Idk man I wasent sure if they were ultrasonic or not but ya makes sense
@@siroglethorpe311 Those are well known and common ultrasonic modules for the Arduino, they are used for sonar.
This IS real. It's using the ultrasound speakers from the distance detectors. You can de solder them and power them (Only need 2 for this to work). Make sure they are like 1 inch apart and powered on. Then put anything in the middle!
I'm guessing this is called acoustic levitation?
yes
indeed and the machine is called a sonic levitation chamber.
Love the video, hate the music. Want to show this to other people, but too embarrassed to do so.
Mute the video 😐
Same
@@CyanAddict34 lmao bro
Exactly!
So these are not electromagnets, but rather emitting sound?
Yes and when enough sound is hitting these low weight objects, they float
Now cover the entire sky and the entire planet with these sonic emitters to have floating car's and bike's and planes. Sure they will be still and useless but cool for SciFi still shot's.
Huh? How do you make ultra sonic sensors do that, they aren’t speakers.
Speaker? They send and receive sound waves.
they are technically speakers, they just produce high frequency sounds that humans cant hear
Are these sounds dangerous or can they harm animals?
No
They’re fine
What would happen if you change the frequency or the phasing
locations and number of nodes where you can stick the objects would change.
@@SteveWyattdo you know where I could read more about this or how it is called?
Acoustic nodes is what’s trapping the foam ball. If you looking into ultrasonic levitation that should send you the right way.
Moving things with Frequency?
Blackpink in ultrasonic area 😅
can you tell me how you did that its so cool how let it fly
or does it fly
Didn't know you could catch ultrasound 😂😂😂
The phenomenon is called Acoustic levitation.
Good project, bad music
:D yes
Good music, Bad comment
ZA WARUDO!!!
muda muda muda
No Way !!!!!!! ✊✊✊✊ when I grow up I want to be a nerd !
Papers stuck at spider nets😆😆
Science
this is actually real, there are videos explaining why
This is called acoustic levitation... Really nice concept
Concept ?
@@SuperAnimal1970 yes it's an concept...
Maybe lose the stupid music so we can hear whats going on.
the microphone would pick up a lot of horrible noise.
Cool ultrasonic stasis thing
But what the heck does it actually do? It doesn’t appear to do anything .. looks pretty but so does a rock.
Та тарарата та тарара та
imagine touching one of the metal wires on the top
How can you handle so much current 😫
i wonder if you could trap people as if it were a stasis device.
Imagine doing this with gravitation.
This is arduino gravity sensor technology 😂😂
Yeah you can hear the sharp noise
Bro trying to make a nuclear weapon
Nah. But could be something even better
If you listen very very carefully, you can actually hear the dogs barking in the background
what would happen if you had the transducers on the outside?
The energy output by the transducers is not enough to overcome the weight of the unit so it would not fly.
@@TaylorTheDeveloper wasn't thinking about it flying
Did you have a goal in mind with your question or were your more 'what-if-ing'?
@TaylorTheDeveloper week
Well, what's happening here? You had a frequency that is being pulsed 180 degrees out of phase. Whatever you have in the center of that is sitting in a zone of cancelation. What if you vibrate that zone of cancelation with another frequency? Would that object be in its own "atmosphere"?
How the universe is held together lol
How the heck do you use only the HC-SR04s to levitate some small pieces of whatever and these waves are somewhat so strong that they even destroyed the camera footage that he/she was trying to capture by bringing it a bit closer and to the top
초전도체 조작을 이렇게 한 건 아닐까...
For some reason while seeing this,i qas having a sensation of pain in my right ear
And then we hit it with about 10 hundred watt lasers and boom we have fusion can't wait to see when people realise this stuff is actually easy ❤ the only reason it's hard is because society teaches us to believe it is 😊
Anti gravity project 👍
Well I don't understand what is it 😅
its using the vibrating of sound waves in order to make things levitate
@@kneelforneil7682just like they did to build the pyramids!
How many sesor are there
Dar para fazer um disco voador o mesmo um skeite voador
looks like 56
@@itoibo4208 about 60
Exactly 60
Acoustic Killination😂
Dogs or cats: 👁👄👁
SONIC DOOM!
How tf do you have so many HCSR-04 ultrasonic modules?!
1. It's HC-SR04
2. It's just the ultrasonic transmitter
@@AstroSpark2 my bad
You left out the part about what the fuck it does.
não entendi isso está grudado em teias de aranhas?
Meanwhile, I have only two such sensors
what's it feel like when you smack your hand though it?
I think it's because there's the EXACT same pressure on both sides to make them stay in place and if someone calls me a dumb a## I'm going to punch my monitor I swear
Du*b a##
it creates criss crossing sound waves and the pieces get stuck in the standing waves so its kind of like a bunches little punches of air keeping it in place.
English or spanish ahh project 💀
Paused in real life lol
Bro literally said “Frick gravity”
My poor friend😢, behind the door 🚪
Saying:-____,_____,_____.
悬浮UFO？
so sound and frequencies are the antigravity???
Where is Newton😅😅😅
What kind of sorcery is this
Hey..uhm.. why did u need 100 ultrasonic sensor modules again?...
Yes
Имба
Bro ultrasonic modules cannot do that 😕😕
It's possible. Search "sonic ray tractor"
I've built this exact project before, it definitely works. Look up "acoustic levitation".
Ye hai kya khis cheez ka model hai
аж уши заболели))) классный проект
Free Palestine 🇵🇸
Свободная Палестина
What if you made a really big one
This is just mind blowing
Jess I av phobia for this hole like sensor
Looks like a Trypophobia 😫😷😵
I have only 2 arduino speakers.
But what else can it do?
Bro i taught that mirars there 😮
Is the code open sourced somewhere ?
Which aurdino ur using
I guess mega
looks like a nano or an esp32 on the breadboard in one of the shots,
The real 360deg cctv
un truc de ouf
video artifacts
I don't get it
hello
floaty😂
Gravity ko mar diya
fake they are ulta sonic sensors
No they aren’t they are ultrasonic emitters you wet blanket
Lost gravity....
you can you just haft to move very fast
how bro u using ultrasonic
Ultrasonic
bro jus froze the space time continume
😻
How it work
It shoots sound waves out at a frequency of 40mh which creates areas of levitation.
ZA WARUDO
what is this ?
What is this thing and why does it have ultrasonic sensors this is suck
He look goood
Standing Wave around 10Khz ? It must measure the impendance of each to control them frequency , viewed on Camera with 100Hz hmm.. looks difficult i can learn here for my stuff ^^ ruclips.net/user/shortsb8of92hBnX0
Bro full video bro 😅
what is happening
that will be my project in university next week who can help me with it
black pink magic