Thank you. We'll conduct a risk analysis before starting the work. As you can see in the video, there are no cars at all on this street, and it's quite wide. In my other videos, you'll see that I use tma protection.
@@Skyworkss back in the days where I fixed street lights we used the same system, but in 2008 in Denmark it became a requirement that streetlights is protected by RCD and the TNC is no longer possible, it was fortunately after I stopped. It became a requirement because one person died touching a faulty light pole
Accidents can happen no matter what system you use. But in Sweden, they continue with that system. It can also be a question of cost if one is to renew cables.
Did you install only these LEDs? I don't think that they are that good because they veeeeery cheap. From which manufactorer are the smart hubs on the top of the fixture? And did you know the manufactorer of the driver (mostly Philips and Osram)?
Cheap and cheap, you probably shouldn't say that. They cost 500 dollars each. Schreder fixtures have quite good quality. Now we are installing these fixtures in a harbor.
@@Skyworkss oh okay. In Germany the smallest version costs 180€ and it's before the Philips Lumistreet (196€) the cheapest Fixture on the market. But I doubt it, that they have good quality😅 it isn't even built in the european Union. I prefer Philips, AEC, Siteco or Trilux for streetlighting
Yes, I also prefer other fixtures. But I’m not the one making the purchasing decisions 😂. Since it’s a port area, they might have decided it should be cheap and LED at the same time. There are also different price levels for Schreder fixtures. But in the city center, we have quite a lot of Philips fixtures.
If I'm being honest, I'm not very fond of LED fixtures. I think I mentioned that before. I like SGS fixtures, especially the SGS 203. I also like older versions of Kungs fixtures, and Siteco fixtures are among my favorites as well.
Man måste ha intresse och vara en problemlösare. Sen är det lite fysiskt krävande, men det gäller alla jobb som elektriker.höjdrädd ska man inte heller vara 😂. Sen är det riktigt härligt jobb man ska absolut inte klaga.
![COLOMBIA vs. CHILE [4-0] | RESUMEN | ELIMINATORIAS SUDAMERICANAS | FECHA 10](http://i.ytimg.com/vi/TDjN4W3yy1k/mqdefault.jpg)
Awesome work 👍
Thanks 🙏
Don't you have to put out cones on the road for Insurance purposes behind your truck? But very good install job too
Thank you. We'll conduct a risk analysis before starting the work. As you can see in the video, there are no cars at all on this street, and it's quite wide. In my other videos, you'll see that I use tma protection.
@@Skyworkss good point can see you do a quality job and very interesting to watch how you do it
Thank you for the kind words. When you're going to work anyway, I believe you should do it with quality, that's how I reason.
Vilket meck
Ja, så blir det när man plötsligt får arbetskollegor som blir sjuka.
❤
❤️
Ωραίο βίντεο ❤
😘
why are you connected the cable green yallow with bleu together , this is danger bro
It is a TNC system where protective earth and neutral share the same physical conductor. So, no, it is absolutely not dangerous.
@@Skyworkss back in the days where I fixed street lights we used the same system, but in 2008 in Denmark it became a requirement that streetlights is protected by RCD and the TNC is no longer possible, it was fortunately after I stopped. It became a requirement because one person died touching a faulty light pole
Accidents can happen no matter what system you use. But in Sweden, they continue with that system. It can also be a question of cost if one is to renew cables.
Was it just this one you did or more that day? I’m assuming the Izylum was 70w?
Yes 70 w . Can't you see that I have loaded several fixtures into the cart? I was at it all day.
My bad, I did see them but forgot.
Did you install only these LEDs? I don't think that they are that good because they veeeeery cheap.
From which manufactorer are the smart hubs on the top of the fixture? And did you know the manufactorer of the driver (mostly Philips and Osram)?
Cheap and cheap, you probably shouldn't say that. They cost 500 dollars each. Schreder fixtures have quite good quality. Now we are installing these fixtures in a harbor.
@@Skyworkss oh okay. In Germany the smallest version costs 180€ and it's before the Philips Lumistreet (196€) the cheapest Fixture on the market. But I doubt it, that they have good quality😅 it isn't even built in the european Union. I prefer Philips, AEC, Siteco or Trilux for streetlighting
Yes, I also prefer other fixtures. But I’m not the one making the purchasing decisions 😂. Since it’s a port area, they might have decided it should be cheap and LED at the same time. There are also different price levels for Schreder fixtures. But in the city center, we have quite a lot of Philips fixtures.
@@Skyworkss what are your favorites by LED Streetlights?
If I'm being honest, I'm not very fond of LED fixtures. I think I mentioned that before. I like SGS fixtures, especially the SGS 203. I also like older versions of Kungs fixtures, and Siteco fixtures are among my favorites as well.
Är det ett svårt job?
Man måste ha intresse och vara en problemlösare. Sen är det lite fysiskt krävande, men det gäller alla jobb som elektriker.höjdrädd ska man inte heller vara 😂. Sen är det riktigt härligt jobb man ska absolut inte klaga.