@@JamesDirtRC I don’t know what it is about blue and white but I totally love the combo of the two colors. The blue RC4WD Toyota that came with the stock white wheels like these was difficult for me to replace with the chrome Toyota SR5 wheels but I don’t mimd the SR5’s. I want to use the stock aluminum white wheels from that Toyota on something but not sure what!!?
You where right. Muscle spaz and Bursitis something in my Shoulder. 2 knots. She said 6 weeks, most likely sooner. She gave me some Exercises to do and Non narcotic meds. Said don't sleep like that. hahahaha. Did Xrays just now and will be a couple days before she gets them or look at them. Make she not missing anything. But she seemed pretty confident about it. And i agree. Didn't feel dislocated and it is not. I been doing everything right she said so thats good. Neck knot is almost gone, just sore and stiff. Shoulder knot though ugh , i can Not raise my left arm up to my chest level. Car is getting closer to being done. Super excited to see it rolling. As i put it together i was making sure no Binding in drive train. And one Ball cup thing for steering is missing,. So i Fabricated one. Today will be the Confusing , steering Arms and servo next and ESC. Came with Hobbywing 1060. 540 motor or something. I should be able to run my Lion battery 2s 1500mah and it work ? and i have the 3s pack too. They show one of those Huge Old school Battery's. nicolhydry something. Oh man the Shocks i got from AliExpress for the TT-02 Had Oil and are So nice, not much to compare them too but they feel cool. Omg the springs that came with the car and Friction Pogo stick shocks. Worst thing i ever seen. My stock wpl ones are better. I see why everyone said GET shocks and Bearings. The differential are amazing. 2 gears top and bottom and 4 smaller gears on a cross member with in a Case. The build is easy cause some of the front an rear parts are the same. I am going to Dremel the steering knuckles to get more throw in it. Little Black blocks in the way, Worst steering Ever. There High for Rally off road section, is just flipping the front and rear knuckles and washers so the car sits higher. Anyways just thought i jump on and let you know how it went. Hope you are doing good my Friend.
I had a horrible muscle spasm in my neck once that would not let me turn my head. It was freaky and so painful when i tried to turn my head. Good thing you got checked out so now its the road to recovery!…Everything on the RC sounds good minus the shocks but you already addressed that with oil filled ones which is perfect! The 1/12 rally im waiting for customs to pass has similar aweful shocks or at least they look like friction shocks in the images and for the whole thing costing less than $50 i cant expect greatness lol! I will give the stock setup a chance and go from there. I seen a video where someone installed the metal oil shocks from a wltoys 1/14 scale buggy and I happen to have a broken one that I can swipe the shocks from( I just have to find it in a mess of an rc room filled from floor to ceiling with RC’s.
@@deanmachinerc Thank you. Yea i wish you would get that Rally car. From the Few videos i seen it RIPS right out of the Box. Gyro, i thought it had oil shocks. I wonder if it got caught up in the Canadian Mailing strike and is Sitting on a shelf some where. Forgotten. Yea i bet what ever it needs for shocks you'll have it. hahahah. You Rock buddy :)
@ I was wondering the same about it caught in the strikes? All i can do is wait a little linger to see if it will eventually continue shipping. It blows! I really want to see it in person as it may be the best deal ive gotten out of an rc car being only paid $45 for it. its driving me mad waiting! Im so impatient with something like this issue!
@@deanmachinerc Yea i would be Emailing an calling them cause i am big baby and i weill Throw an Adult Big Baby FIT Hahahahahaha Yea i totally understand. I got my WPL C24-1 for $35 on Aliexpress as my First purchase with the app and Coins and Blah blah there gimmick crap. THe blue one i got for $40 or something. Now i am into the c24-1 if i can call it that anymore, about $150. Mostly my own fault LOL Breaking or Getting wrong parts. The waiting is the worst part. The owner of the RC shop lives the next town over, 35min away. The RC shop is 50 min away. He said we lost 3 shops in Oregon this last year. SO he is pretty happy with his success and Thanks the customers and is very nice. HAs the Track and Races Every few months till the end then start another one. OMg these stupid little plastic limiting steering on the knuckle is so Stupid on the TT-02 build. Either forget to cut that off the molded part or it is there on Purpose. Mark in the UK has great videos on it. I want to build another one now after this. Kind of easy. $110 for kit and then some Cheap electronics. Sell it for $350 as RTR. Oh i told the wife, 6 weeks aint going to work for me unless you film or drive my Rig cause i love making videos. Sorry so long winded. Hahaha
So far it get warm but surprisingly even on a 3s lipo it doesnt get too hot. I will admit on 3s it looses too much low speed control that it becomes less enjoyable of a drive. 2s with its stock gearing is all that it needs.
@deanmachinerc and imagine,they sell other mn models with same setup but 7 continius 12max amp 2in1 board😅😅so much potential left used,my mn 82 rips totally hard with 40amp,this 168 is perfect
Im waiting for the upgraded model of it, usually not long after they make a new one MN will bring out one with a few extra options. I want to get that upgraded MN82 that looks nice all in flat black with the cool looking bed. I just seen TomleyRC make a new video on it. It looks so good I have to get one.
I love the white wheels with that blue
@@JamesDirtRC I don’t know what it is about blue and white but I totally love the combo of the two colors. The blue RC4WD Toyota that came with the stock white wheels like these was difficult for me to replace with the chrome Toyota SR5 wheels but I don’t mimd the SR5’s. I want to use the stock aluminum white wheels from that Toyota on something but not sure what!!?
Nice
🔵🔵🔵🙂🙂🙂👍👍👍🔵🔵🔵
@@carloshnunez thank you always!😀👍happy new year!🤜🤛☮️
You where right. Muscle spaz and Bursitis something in my Shoulder. 2 knots. She said 6 weeks, most likely sooner. She gave me some Exercises to do and Non narcotic meds. Said don't sleep like that. hahahaha. Did Xrays just now and will be a couple days before she gets them or look at them. Make she not missing anything. But she seemed pretty confident about it. And i agree. Didn't feel dislocated and it is not. I been doing everything right she said so thats good. Neck knot is almost gone, just sore and stiff. Shoulder knot though ugh , i can Not raise my left arm up to my chest level. Car is getting closer to being done. Super excited to see it rolling. As i put it together i was making sure no Binding in drive train. And one Ball cup thing for steering is missing,. So i Fabricated one. Today will be the Confusing , steering Arms and servo next and ESC. Came with Hobbywing 1060. 540 motor or something. I should be able to run my Lion battery 2s 1500mah and it work ? and i have the 3s pack too. They show one of those Huge Old school Battery's. nicolhydry something. Oh man the Shocks i got from AliExpress for the TT-02 Had Oil and are So nice, not much to compare them too but they feel cool. Omg the springs that came with the car and Friction Pogo stick shocks. Worst thing i ever seen. My stock wpl ones are better. I see why everyone said GET shocks and Bearings. The differential are amazing. 2 gears top and bottom and 4 smaller gears on a cross member with in a Case. The build is easy cause some of the front an rear parts are the same. I am going to Dremel the steering knuckles to get more throw in it. Little Black blocks in the way, Worst steering Ever. There High for Rally off road section, is just flipping the front and rear knuckles and washers so the car sits higher. Anyways just thought i jump on and let you know how it went. Hope you are doing good my Friend.
I had a horrible muscle spasm in my neck once that would not let me turn my head. It was freaky and so painful when i tried to turn my head. Good thing you got checked out so now its the road to recovery!…Everything on the RC sounds good minus the shocks but you already addressed that with oil filled ones which is perfect! The 1/12 rally im waiting for customs to pass has similar aweful shocks or at least they look like friction shocks in the images and for the whole thing costing less than $50 i cant expect greatness lol! I will give the stock setup a chance and go from there. I seen a video where someone installed the metal oil shocks from a wltoys 1/14 scale buggy and I happen to have a broken one that I can swipe the shocks from( I just have to find it in a mess of an rc room filled from floor to ceiling with RC’s.
@@deanmachinerc Thank you. Yea i wish you would get that Rally car. From the Few videos i seen it RIPS right out of the Box. Gyro, i thought it had oil shocks. I wonder if it got caught up in the Canadian Mailing strike and is Sitting on a shelf some where. Forgotten. Yea i bet what ever it needs for shocks you'll have it. hahahah. You Rock buddy :)
@ I was wondering the same about it caught in the strikes? All i can do is wait a little linger to see if it will eventually continue shipping. It blows! I really want to see it in person as it may be the best deal ive gotten out of an rc car being only paid $45 for it. its driving me mad waiting! Im so impatient with something like this issue!
@@deanmachinerc Yea i would be Emailing an calling them cause i am big baby and i weill Throw an Adult Big Baby FIT Hahahahahaha Yea i totally understand. I got my WPL C24-1 for $35 on Aliexpress as my First purchase with the app and Coins and Blah blah there gimmick crap. THe blue one i got for $40 or something. Now i am into the c24-1 if i can call it that anymore, about $150. Mostly my own fault LOL Breaking or Getting wrong parts. The waiting is the worst part. The owner of the RC shop lives the next town over, 35min away. The RC shop is 50 min away. He said we lost 3 shops in Oregon this last year. SO he is pretty happy with his success and Thanks the customers and is very nice. HAs the Track and Races Every few months till the end then start another one. OMg these stupid little plastic limiting steering on the knuckle is so Stupid on the TT-02 build. Either forget to cut that off the molded part or it is there on Purpose. Mark in the UK has great videos on it. I want to build another one now after this. Kind of easy. $110 for kit and then some Cheap electronics. Sell it for $350 as RTR. Oh i told the wife, 6 weeks aint going to work for me unless you film or drive my Rig cause i love making videos. Sorry so long winded. Hahaha
That 40a is so much power,does stock motor get warm?
So far it get warm but surprisingly even on a 3s lipo it doesnt get too hot. I will admit on 3s it looses too much low speed control that it becomes less enjoyable of a drive. 2s with its stock gearing is all that it needs.
@deanmachinerc and imagine,they sell other mn models with same setup but 7 continius 12max amp 2in1 board😅😅so much potential left used,my mn 82 rips totally hard with 40amp,this 168 is perfect
Im waiting for the upgraded model of it, usually not long after they make a new one MN will bring out one with a few extra options. I want to get that upgraded MN82 that looks nice all in flat black with the cool looking bed. I just seen TomleyRC make a new video on it. It looks so good I have to get one.
@@deanmachinerc I agree those look really cool.
@@JamesDirtRC MN nailed it with the black on black look on the new MN82’s and if I get one i would paint the tan parts on the bed too.