Looks like fun! I have a 10.8 boat too with a Chrysler 15 Horse. It goes about 19 MPH by myself and 17 mph with two people. That motor seems nice and strong!
I just bought a 15hp on Aliexpress. I will be trying it on a small fiberglass skiff that I have. It will be a while before I receive it but looking forward to it.
Is that a Hider 10.8’ boat? How does it handle a motor that size? I am thinking a 9.9 might be a better fit for that boat. How are the transom joints holding up?
I just bought this engine. I put it in a test barrel and it started quickly. Problem is I don't see cooling water flowing out of the engine at all. Does the cooling water start flowing after the engine reaches a certain operating temperature? This would be unlike any outboard I've had in the past. I'm afraid to run it too long, for fear of overheating and damaging it. Any ideas?....UPDATE.... I used cooling muffs instead of the water tank, and that got the water flowing. I wish I knew that from the get-go. Now it works fine in the tank.
@@giainhsumofamily9038 Yes, it's a great motor for the price. I wish the owner's manual was in English though. I can't read Chinese at all! I'm getting a little lower unit lube leaking from a hole that's near the fill screw on the bottom of the lower unit. I read somewhere that this may be caused by overfilling. I filled it by adding fluid until it came out the top hole. Does yours leak this way?
dude you need to learn proper starting procedures. a good tip with a rebuilt or new 2 stroke: any budget tcw3 oil 25:1 for the first 8-10 hrs. On first start, let it idle for a full 10 minutes before giving it any throttle whatsoever. this will gently help seat the rings, and make it last much longer.
I am on the fence about buying one of these outboards, would you recommend this outboard and how much does it weighs. Appreciate any input to help me make a decision. Thanks
I replaced a 6hp Yamaha 4-stroke with this motor and to me it's about the same weight. I think around 59 lbs. I would have bought a new Japanese 2-stroke but they aren't available in the US, and I didn't want to mess with a used older engine. I had it out twice and it's running great, even with a 25-1 break-in mix. So far I can't find any faults and with the labels removed you'd think it's a Tohatsu or Merc.
@@yamahajapan5351 I haven't used it it a few months, since my cabin cruiser has been in the water. I'm anxious to test it though, to see how the fuel lines are holding up. I've heard people are replacing the fuel lines with higher quality stuff.
Good thing to see the supreme leader having a little fun
Jk.
😂🤣
He likes water sports...
Looks like fun! I have a 10.8 boat too with a Chrysler 15 Horse. It goes about 19 MPH by myself and 17 mph with two people. That motor seems nice and strong!
Yes, so cheap compared to brand name
Que belocidas alcanzar 15 de velocidad
I maxed it out at 22 mph on my 12ft aluminum by my self. When me and the wife full of gear 14-17 mph.
Gotta a 9.8 tohatsu on 12 foot alumacraft jon boat it runs 18 to 20 mph with 2 people and gear bout 450lbs in boat
I just bought a 15hp on Aliexpress. I will be trying it on a small fiberglass skiff that I have. It will be a while before I receive it but looking forward to it.
You going to love it. I have so much fun zipping around in this setup and it doesn’t use any gas at all
I'm sure I will. The best thing was "the price"
Dis you get it on aliexpress? How much if you dont mind?
@@thornyturtleranch6152 I got it on eBay. $1234
@@thornyturtleranch6152 I paid $1464.00.shipping included. I received it today.
Is that a Hider 10.8’ boat? How does it handle a motor that size? I am thinking a 9.9 might be a better fit for that boat. How are the transom joints holding up?
I just bought this engine. I put it in a test barrel and it started quickly. Problem is I don't see cooling water flowing out of the engine at all. Does the cooling water start flowing after the engine reaches a certain operating temperature? This would be unlike any outboard I've had in the past. I'm afraid to run it too long, for fear of overheating and damaging it. Any ideas?....UPDATE.... I used cooling muffs instead of the water tank, and that got the water flowing. I wish I knew that from the get-go. Now it works fine in the tank.
It’s been a while that I used it. I think the hot water come out on one of the side. I did feel the water and it’s warm.
Isn’t the price is great? I noticed the second time I went out it’s got more power
@@giainhsumofamily9038 Yes, it's a great motor for the price. I wish the owner's manual was in English though. I can't read Chinese at all! I'm getting a little lower unit lube leaking from a hole that's near the fill screw on the bottom of the lower unit. I read somewhere that this may be caused by overfilling. I filled it by adding fluid until it came out the top hole. Does yours leak this way?
@@dannyrusso8279 no, my doesn’t leak
@@giainhsumofamily9038 Thanks....I'll have to check back with the eBay dealer I bought it from.
What size boat is this ? Look like fun
12 ft
@@giainhsumofamily9038 thanks
was wondering where you bought the motor. id like to get one.
eBay or I heard people bought it from alibaba website
on amazon
dude you need to learn proper starting procedures. a good tip with a rebuilt or new 2 stroke: any budget tcw3 oil 25:1 for the first 8-10 hrs. On first start, let it idle for a full 10 minutes before giving it any throttle whatsoever. this will gently help seat the rings, and make it last much longer.
Thanks dude
I am on the fence about buying one of these outboards, would you recommend this outboard and how much does it weighs. Appreciate any input to help me make a decision. Thanks
I like to save money. I used it about maybe 3 or 4 times a year. And I regularly maintain it pretty good. So I think it last me for awhile
I replaced a 6hp Yamaha 4-stroke with this motor and to me it's about the same weight. I think around 59 lbs. I would have bought a new Japanese 2-stroke but they aren't available in the US, and I didn't want to mess with a used older engine. I had it out twice and it's running great, even with a 25-1 break-in mix. So far I can't find any faults and with the labels removed you'd think it's a Tohatsu or Merc.
@@dannyrusso8279 it’s is a straight up Tohatsu clone. One of the finest strokers made
@@yamahajapan5351 I haven't used it it a few months, since my cabin cruiser has been in the water. I'm anxious to test it though, to see how the fuel lines are holding up. I've heard people are replacing the fuel lines with higher quality stuff.
How is the functionality for the Hangkai? I decided to buy it.
You’re going to love it
Máy china giật 10 lần mới nổ
Lúc lạnh mình prime rồi giặc khoảng 3 4 lần rồi nổ. Lúc nóng rồi mình chỉ giặt 1 cái là nổ liền
Looks like a blash.
Engine so ok?
Still excellent. Can’t wait to take it out next summer
Just run it and it run excellent
Boat size?
I think it 10.8 ft
Руки бы оторвать за неумение пользоваться ручным стартером!
Stretching
Rm ringgit malaysia?hangkai 12hp
Terjumpa kt Mersing rm3900.
@@baharuddinhamzah8140 ada no tel kedai tu x
@Orang Minyak Spearfishingboleh harap ka sbb barang ribu2 ni x berpa nk yakin takut beli yg mcm lain dpt yg lain
@@nazirah5944 kat kuantan 12hp 3200
who need 12hp for that small boat.🤣
I want like 18 hp