Can CURRENT/AMPS be set/adjusted in this 900BVPR device, also can both relays be used by giving only L1 supply? if not, which selec device do you recommend? Thanks for this video..
Yes. You can use this voltage protection relay or any other make voltage protection relay for your home line. Connection to this relay requires only control wires of 1 sq mm, and output of this relay can be connected to alarm
This relay output contacts can take load on maximum 6 Amps. If you need to protect load of 100A or more than you need to use Power Contactor 100A rating and use output of protection relay to trip this Contactor
Great. Good & Simple way of teaching & training. We appreciate your passion. Wish you all the very best! Keep up the spirit!
Thanks for appreciations
Superb Explanation 👌 Very Usefull to me Thank you
Can CURRENT/AMPS be set/adjusted in this 900BVPR device, also can both relays be used by giving only L1 supply?
if not, which selec device do you recommend?
Thanks for this video..
good explanation thanks!
Ye relay ka wiring contactor ke sath me kese karte he ?
What about some Two phase 220v voltage measure relay
Probably we have to use two 1-phase voltage protection relays for two phase
Can i use it for single phase purpose?...
There are different models for 1-phase protection.
@@starautomation I have this sir please reply
Can I use single phase
@@kintumintu7977 u can use single phase
Sir mene Ghar k liye liya hu.
Kiya me use single phase me usekarsakta hu please reply sir
Use single phase voltage protection relay.
Thank you sir
Thank u so much
Shirley Wells
Can I use single phase
No. This relay is for 3-phase supply.
me le khukaa hu sir single phase kese use kare
Sirr how to connetion
सर मे घर के लिये हू सिंगल फेज मे कनेक्शन कैसे करे ओर सेटिंग कैसे करें बताईना प्लीज सर
Sir one phase fault ho gaya to relay kaam karega baki 2 phase ke liye
In case of 1 phase fault then relay will operate its contacts and control circuit connected through this will be tripped.
Iski manual pdf milegi sir
You can download it from selec website
1:24 @@starautomation
Relay bypass connection kaise hoga
Short the output Normally open contact of relay
घर मे इसे क्या लो और हाई वोल्टेज प्रोटेक्शन के लिए लगा सकते हैं। मेन MCCB 3Ph 100 Amp की है। ये कितने करंट तक के लिए use होगा।
Yes. You can use this voltage protection relay or any other make voltage protection relay for your home line.
Connection to this relay requires only control wires of 1 sq mm, and output of this relay can be connected to alarm
This relay can take a load of 100 amperes
This relay output contacts can take load on maximum 6 Amps.
If you need to protect load of 100A or more than you need to use Power Contactor 100A rating and use output of protection relay to trip this Contactor
@@starautomationconection diagram mil jayega
tnl folt aa rha he
Very very Long Process of Setting
As there are various protection in VPR relay such as over voltage, under voltage, phase failure, phase sequence